• 제목/요약/키워드: ligand

검색결과 2,324건 처리시간 0.027초

TNF-α/IL-17A 유도된 HaCaT 세포주에서 Quercetin의 IκBα/STAT3 인산화 조절에 의한 CCL20 발현 억제 (Quercetin suppress CCL20 by reducing IκBα/STAT3 phosphorylation in TNF-α/IL-17A induced HaCaT cells)

  • 김미란;김민영;황형서
    • Journal of Applied Biological Chemistry
    • /
    • 제63권3호
    • /
    • pp.211-219
    • /
    • 2020
  • Quercetin은 항산화 및 항염증 활성이 잘 알려져 있으나, 건선 피부염 조절에 대한 효능 연구는 거의 보고된 것이 없어, in vitro 건선 피부염 시험 모델인 TNF-α/IL-17A 유도 HaCaT 세포주를 이용해 quercetin에 의한 건선 피부염 개선 효과를 규명하였다. 먼저, TNF-α에 의해 활성화된 HaCaT 세포주에 quercetin을 처리한 결과, IL-1α, IL-1β, IL-6 등 염증성 사이토카인 발현이 TNF-α 처리군 대비 각각 49.1±7.14, 42.8±8.16, 34.5±2.52% 억제되었다. Th17세포 및 수지상세포 등 면역세포를 염증 반응 부위로 유인하는 케모카인 IL-8 및 CCL20의 mRNA 발현량 또한 TNF-α 처리군 대비 38.4±5.83, 52.9±4.59% 감소하였다. TNF-α 자극에 의해 건선피부에서 비특이적으로 증가되는 케라틴 단백질 KRT6A 및 KRT16 발현뿐만 아니라, IκBα 및 STAT3 단백질의 인산화 또한 quercetin에 의해 유의적으로 억제되었다. 또 다른 건선 유발 사이토카인으로 알려진 IL-17A로 HaCaT 세포주를 자극한 후 quercetin에 의한 영향을 관찰한 결과, IκBα mRNA 발현은 55.8±5.28% 감소하였고, STAT3 인산화는 36.3±6.81% 하향 조절되었다. 마지막으로 TNF-α/IL-17A를 동시 자극한 HaCaT 세포주에 quercetin을 처리한 결과, IL-1α, IL-1β, IL-6, TNF-α, CCL20 유전자 발현이 모두 억제되는 것을 확인하였다. 이를 통해 quercetin은 기존 항산화, 항염증 활성뿐만 아니라 건선 피부염 개선에 활성을 갖는 소재임을 확인할 수 있었다.

당뇨유도 백서 경골에 티타늄 임플란트 매식 시 지방조직 유래 줄기세포 주입 후 저출력 초음파 적용이 골치유에 미치는 영향 (Effect on bone healing by the application of low intensity pulsed ultrasound after injection of adipose tissue-derived stem cells at the implantation of titanium implant in the tibia of diabetes-induced rat)

  • 정태영;박상준;황대석;김용덕;이수운;김욱규
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제37권4호
    • /
    • pp.301-311
    • /
    • 2011
  • Introduction: This study examined the effect of the application of low intensity pulsed ultrasound on bone healing after an injection of adipose tissue-derived stem cells (ADSCs) during the implantation of a titanium implant in the tibia of diabetes-induced rats. Materials and Methods: Twelve Sprague-Dawely rats were used. After inducing diabetes, the ADSCs were injected into the hole for the implant. Customized screw type implants, 2.0 mm in diameter and 3.5 mm in length, were implanted in both the tibia of the diabetes-induced rats. After implantation, LIPUS was applied with parameters of 3 MHz, 40 mW/$cm^2$, and 10 minutes for 7 days to the left tibiae (experimental group) of the diabetesinduced rats. The right tibiae in each rat were used in the control group. At 1, 2 and 4 week rats were sacrificed, and the bone tissues of both tibia were harvested. The bone tissues of the three rats in each week were used for bone-to-implant contact (BIC) and bone area (BA) analyses and the bone tissues of one rat were used to make sagittal serial sections. Results: In histomorphometric analyses, the BIC in the experimental and control group were respectively, $39.00{\pm}18.17%$ and $42.87{\pm}9.27%$ at 1 week, $43.74{\pm}6.83%$ and $32.27{\pm}6.00%$ at 2 weeks, and $32.62{\pm}11.02%$ and $47.10{\pm}9.77%$ at 4 weeks. The BA in experimental and control group were respectively, $37.28{\pm}3.68%$ and $31.90{\pm}2.84%$ at 1 week, $20.62{\pm}2.47%$ and $15.64{\pm}2.69%$ at 2 weeks, and $11.37{\pm}4.54%$ and $17.69{\pm}8.77%$ at 4 weeks. In immunohistochemistry analyses, Osteoprotegerin expression was strong at 1 and 2 weeks in the experimental group than the control group. Receptor activator of nuclear factor kB ligand expression showed similar staining at each week in the experimental and control group. Conclusion: These results suggest that the application of low intensity pulsed ultrasound after an injection of adipose tissue-derived stem cells during the implantation of titanium implants in the tibia of diabetes-induced rats provided some positive effect on bone regeneration at the early stage after implantation. On the other hand, this method is unable to increase the level of osseointegration and bone regeneration of the implant in an uncontrolled diabetic patient.

실리카 지지 니켈-구리 합금에서 일산화탄소의 흡착에 관한 IRS 연구 (An IRS Study on the Adsorption of Carbonmonoxide on Silica Supported Ni-Cu Alloys)

  • 안정수;윤구식;박상윤;박성균
    • 대한화학회지
    • /
    • 제53권3호
    • /
    • pp.233-243
    • /
    • 2009
  • 실리카지지 니켈(Ni-Si$O_2$), 실리카지지 구리(Cu-Si$O_2$), 몇가지 조성의 실리카지지 니켈과 구리의 합금(Ni/Cu-Si$O_2$)을 실온에서 일산화탄소(CO)의 압력을 넓은 범위에서 변화시키면서(0.2 $torr{\sim}$50 torr) 흡착된 CO의 적외선 스펙트럼을 1500 $cm^{-1}{\sim}2500\;cm^{-1}$ 범위에서 관찰했고 실온에서 진공탈착시키면서 흡착된 CO의 적외선 스펙트럼을 관찰했다. Ni-Si$O_2$에 CO를 흡착시켰을 때 2059.6 $cm^{-1},\;{\sim}$2036.5 $cm^{-1},\;{\sim}$1868.7 $cm^{-1},\;{\sim}$1697.1 $cm^{-1}$의 네 흡수띠가 관찰되었고, Cu-Si$O_2$에 일산화탄소를 흡착시켰을 때 $\sim$2115.5 $cm^{-1},\;{\sim}$1743.0 $cm^{-1}$ 두 흡수띠가 관찰되었으며, Ni/Cu-Si$O_2$에서는 ${\sim}2123.2\;cm^{-1}$, 2059.6 $cm^{-1},\;{\sim}$2036.4 $cm^{-1},\;{\sim}$1899.5 $cm^{-1},\;{\sim}$1697.1 $cm^{-1}$에 다섯 흡수띠가 관찰되었다. Ni/Cu-Si$O_2$, Cu-Si$O_2$, Ni/Cu-Si$O_2$에서 CO를 흡착시켰을 때 관찰된 흡수스펙트럼은 이전의 보고와 근사적으로 일치한다. 1800 $cm^{-1}$ 이하의 흡수띠는 Ni이나 Ni/Cu 합금의 스텦이 있는 결정표면에서 관찰된 바 있는데 Ni-Si$O_2$, Ni/Cu-Si$O_2$를 실온에서 CO를 흡착시켰을 때 나타나는 ${\sim}1697.1\;cm^{-1}$ 흡수띠는 Ni이나 Ni/Cu 합금 표면에서 스텦에 인접한 흡착자리에 흡착한 CO에 기인한 흡수띠로 제시할 수 있다. Cu-Si$O_2$ 시료를 실온에서 CO를 흡착시켰을 때 Cu 결정표면에서 2000 $cm^{-1}$ 이하의 흡수띠가 관찰되는 경우는 드문데 1743.0 $cm^{-1}$ 흡수띠는 Cu 표면의 스텦에 인접한 흡착자리에 흡착한 CO에 기인한 흡수띠로 제시할 수 있다. Ni/Cu-Si$O_2$에서 Cu의 함량이 몰분율 0.5까지 변함에 따라 같은 CO 압력 또는 같은 진공탈착시간에서 흡수띠의 위치가 21 $cm^{-1}$ 이하로 다른 ⅠB 금속을 첨가했을 때보다 작게 변하는데 Cu d 전자의 리간드 효과가 작은 현상에 기인한 것으로 볼 수 있다.

68Ga-PSMA-11 합성 시간 단축을 위한 자동합성장치의 최적화 및 안정성 연구 (Optimization and Stabilization of Automated Synthesis Systems for Reduced 68Ga-PSMA-11 Synthesis Time)

  • 강지훈;신상민;박영시;김혜지;장화연
    • 대한임상검사과학회지
    • /
    • 제56권2호
    • /
    • pp.147-155
    • /
    • 2024
  • 68Ga-PSMA-11은 전립선특이막항원(PSMA)에 결합하는 Glu-urea-Lys 기반 리간드에 68Ga 방사성동위원소를 표지한 PET 제제로, 재발성 전립선암 및 전이의 진단과 치료를 위한 영상화에 널리 사용한다. 그러나 의료기관에서 68Ga-PSMA-11을 제조하고 품질검사 시험 결과가 나올 때까지의 시간은 평균 60분 이상 소요되어, 하루에 사용할 수 있는 68Ge/68Ga 제너레이터 용량이 제한된다. 또한 제너레이터의 1,110 MBq (30 mCi)의 명목상 활성을 제공하지만 시간이 지남에 따라 감소하고, 표지 수율이 불규칙적으로 저하된다. 이로 인해 의료기관에서는 추가 조제를 통해 동일한 용출을 유지해야 하며, 이 과정에서 작업자의 피폭 위험이 증가하고, 환자의 대기 시간이 길어지며, 제조 스케줄 조정이 불가피한 임상적 문제가 발생한다. 본 연구는 이러한 문제를 해결하기 위해 68Ga-PSMA-11의 조제 시간을 단축하고 자동합성장치를 최적화하는 것을 목표로 하였다. 자동합성장치를 이용한 합성 절차에서 68Ga과 PSMA-11 전구체의 반응 시간을 단축하고 불순물 제거 세척 단계의 횟수를 조절하여 동일한 품질을 유지하면서도 더 신속하고 경제적인 방법을 시험했다. 그 결과, 최종 합성 시간을 30분에서 20분으로 단축하였고, HEPES 함량, 잔류용매 EtOH 함량, 방사화학적 순도 등의 품질 기준을 만족시켰다. 이는 추가 조제로 인한 작업자의 피폭 문제와 환자의 대기 시간을 줄이고, 제조 스케줄 조정에도 문제가 없는 최적의 절차로 임상에서 적용할 수 있음을 시사한다.