• 한국전문물리치료학회지
• /
• 제28권3호
• /
• pp.227-234
• /
• 2021

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9-12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.860-863
• /
• 1992

In this paper, we investigate $\pi$-A isotherms of biological lipid layer such as cholesterol and phosphatidyl choline to study a gas sensor characteristics which response only to specific materials. And, we also deposit it on the surface of quartz crystal by vertical dipping method and horizontal lifting method. Then, we evaluate the deposition status of cholesterol and phosphatidyl choline LB film using AT-cut quartz crystal. We obtain the following results: (1) Cholesterol's solid surface pressure is about 20$\sim$40(dyne/cm) and limiting area is about 50${\AA}^2$/molecule. And, phosphatidyl choline's surface pressure is about 25$\sim$40(dyne/cm) and limiting area is about 20 ${\AA}^2$/molecule. (2) When LB films are deposited, the deposition ratio is coincident with the frequency shift. Therefore, we can evaluate the deposition status of LB film. (3) For cholesterol, Y type LB films are deposited up to 15 layers by vertical dipping method. (4) For phosphatidyl choline, X typo LB films are deposited to 15 layers by horizontal lifting method. But, in case of vertical dipping method, the deposition status is not good.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.699-722
• /
• 2019

It is difficult to observe the potential risks of lifting or turn-over operations in the early stages before a real operation. Therefore, many dynamic simulations have been designed to predict the risks and to reduce the possibility of accidents. These simulations, however, have usually been performed for predetermined and fixed scenarios, so they do not reflect the real-time control of an operator that is one of the most important influential factors in an operation; additionally, lifting or turn-over operations should be a collaboration involving more than two operators. Therefore, this study presents an integrated method for a collaborative simulation that allows multiple workers to operate together in the virtual world. The proposed method is composed of four components. The first component is a dynamic analysis that is based on multibody-system dynamics. The second component is VR (virtual reality) for the generation of realistic views for the operators. The third component comprises the control devices and the scenario generator to handle the crane in the virtual environment. Lastly, the fourth component is the HLA (high-level architecture)-based integrated simulation interface for the convenient and efficient exchange of the data through the middleware. To show the applicability of the proposed method, it has been applied to a block turn-over simulation for which one floating crane and two crawler cranes were used, and an offshore module installation for which a DCR (dual-crane rig) was used. In conclusion, the execution of the proposed method of this study is successful regarding the above two applications for which multiple workers were involved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.71-72
• /
• 2016

Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. Therefore, this study tries to investigate 'hallow PC column composite method(HPC composite method)' from the viewpoint of construction management and analyze the construction cost of the composite method. On the assumption that each comparative method was applied to the zone, the difference in construction cost between the two methods was analyzed. As a result, HPC composite method increased the initial investment cost because of its factor technology, but reduced transport cost, lifting cost, and installation cost through lightweight columns. This study analyzed only the difference in construction cost of HPC composite method so that it has the limitation in evaluating its economy. Therefore, to evaluate the economy of HPC composite method, it is considered to research more the construction cost of HPC composite method.

• 한국인터넷방송통신학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2009

본 논문에서는 리프팅 웨이브렛 변환을 이용한 디지털 영상의 워터마크 기술을 제안하였다. 이 워터마크 기술은 쉽게 비디오와 관련된 콘텐트에 대한 워터마크 기술로 확장 될 수 있다. 그래서 깊이 정보를 포함하는 다시점 영상을 효과적으로 압축할 수 있는 계층적 깊이 영상 구조라는 새로운 콘텐트에 제안 기술을 적용하였다. 이 방법은 기준 시점 영상에만 워터마크를 삽입하므로 그 과정이 간단하다는 장점을 가진다. 그리고 계층적 깊이 영상 구조의 특성상 나머지 시점 영상으로 워터마크가 전파되므로 모든 시점 영상에 대하여 저작권을 보호할 수 있다는 장점도 가지고 있다.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.49-57
• /
• 1999

An experimental study on double-concentric diffusion flame has been carried out in order to investigate the shape, the flame length, and the other characteristics of the flame. Flow visualization of the flame by the $TiO_2$ particles and also the emission measurements are conducted. The commercial grade LP gases are used as fuel. The inverse diffusion flames are formed at the center when the central air flow rate is about 0.1 L/min. With a larger flow rate of the central air jet than 0.2 L/min the flame turns to be an annular-shaped flame, which is very bright. When the central air flow rate increases over 2.4 L/min, the flame turns to blue and the flame tips are opened because of the lifting of the inner part of the flame. Because of this lifting and the incomplete combustion, the CO emission increases abruptly from 25 ppm to more than 150 ppm. On the contrary, the NOx emission is decreased.

• 로봇학회논문지
• /
• 제10권3호
• /
• pp.139-145
• /
• 2015

This paper proposed a method of cooperative control of three mobile robots for carrying an object placed on a floor together. Each robot moves to the object independently from its location to a pre-designated location for grasping the object stably. After grasping the common object, the coordination among the robots has been achieved by a master-slave mode. That is, a trajectory planning has been done for the master robot and the distances form the master robot to the two slave robots have been kept constant during the carrying operation. The localization for mobile robots has been implemented using the encoder data and inverse kinematics since the whole system does not have the slippage as much as a single mobile robot. Before the carrying operation, the lifting operations are implemented using the manipulators attached on the top of the mobile robots cooperatively. The real cooperative lifting and carrying operations are implanted to show the feasibility of the master-slave mode control based on the kinematics using the mobile manipulators developed for this research.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.248-255
• /
• 1998

The objective of this study is to conduct the prevention method using electromyography that is to resist the strain on L5/S1 disc and to measure the heart rate for the prevention of low back pain during lifting. EMG signals and heart rate were analyzed under the condition of fixed vertical factor (20∼80cm), two horizontal factors (35cm, 55cm), and two weight factors (10kg, 25kg) 2 times per minute for each lifting task. Eight healthy male workers performed nine-step stretching exercises which were intensified back power at the L5/S1 disc for six months. After completion of the two trials, the results were compared. The results of this analysis show that EMG signals have more an effect on the weight than the horizontal factors similar to those analyzed previous study, and are decreased. Therefore, those exercises presented very efficient. Also, there are not statistically significant differences on the analysis result of heart rate between weight factors.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제10권1호
• /
• pp.47-60
• /
• 2006

평판 디스플레이 장치(FPD)의 패널 표면 결함 검출에서 일반적으로 사용되는 단순 문턱값에 의한 결함 검출은 FPD 패널 영상의 불균일한 휘도 변화로 인하여 정확한 결함 검출이 어렵다. 본 논문에서는 이러한 불균일한 휘도 변화를 보상하고, 정확한 결함 검출을 위해 다 해상도 분석방법인 웨이블릿 변환에 기반하여 높은 고주파 잡음제거와 함께 낮은 저주파를 제거함으로써 불균일한 휘도 변화를 보상할 수 있는 알고리즘을 제안하고 구현 하였다. 특히 제조 공정에서의 결함 검출을 실시간 인라인으로 적용하기 위해 리프팅 기반 고속 알고리즘으로 구현하였다.