• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.811-818
• /
• 2011

Though an excavator is classified as an equipment utilizing a shovel in earthworks, it has been frequently used in lifting work. In this view, lifting capacity is classified as the main functions of the excavator. Thus, its accurate functions need to be provided. However, in domestic conditions, the necessity for the functions of lifting capacity are not perceived. This study shows 1) Many researches about lifting-work of excavators abroad are used as basic data necessary for domestic introduction. 2) For domestic excavators without the information of lifting-work, methodologies of lifting-work available are suggested and reviewed. 3)Lifting zones are divided into safety and caution lifting zones. The information on lifting capacity and lifting zones will be able to used as objective and substantive bases to operational planning and safety management.

• International Journal of Safety
• /
• v.10 no.1
• /
• pp.32-35
• /
• 2011

Lifting capacity and difficulty of task are influenced by body posture. In RULA and REBA, the body was divided into segments which formed two groups, A and B. Group A includes the upper and lower arm and wrist while group B includes the neck, trunk and legs. This ensures that whole body posture is recorded so that any awkward or constrained posture of the legs, trunk or neck which might influence the posture of the upper limb. This study aimed to measure MVC (maximum voluntary contraction) and subjective judgment in psychophysical method (Borg's scale) according to trunk and upper arm angle and to analyze results statistically. The results of this study were that lifting capacity was more influenced by interaction of body posture rather than angles of each part, and MVC variation according to trunk and upper arms angles should different patterns. This means that we consider the interaction of trunk angles and upper arm angles when we access risk factors of the postures. This survey would be also the basic data to evaluate difficulty of lifting tasks according to body postures ergonomically.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.69-75
• /
• 2009

It is well-known that lifting capacity of a worker is influenced by body posture during the task. When a task analyst make use of RULA and REBA Trunk and upper arm angles are recorded in a separate item. It means that the interaction between the angles of two body segments may be ignored in a final score. The NLE(NIOSH Lifting Equation) has been used to supplement this problem. However, there is no study to validate the result of RWL (Recommended Workload Limit) under the existence of interactions between trunk and upper arm angles. The goal of this study was to assess the effect of the interaction between trunk and upper arm angles. Three responses, including NMVC(normalized maximum voluntary contraction), RWL(Recommended Weight Limit) and subjective judgment in psychophysical method (Borg's scale), were recorded according to the combinations of three trunk angles and nine upper arm angles. The results showed that lifting capacity is highly influenced by interaction of two body segments(trunk and upper arm). It means that the task workload has to be analyzed along with the interaction of trunk angles and upper arm angles when the task analyst assesses potential risk factors on the postures. This study may be able to be a fundamental study to develop an assessment method for lifting task analyses according to body postures.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1618-1624
• /
• 2009

Since various methods for repairing and rehabilitating have been applied to damaged bridges to increase their load carrying capacity, many researches on the methods have been widely carried out. In particular, In terms of applicability, strengthening efficiency and economical efficiency, external tendons using lifting hole anchorage system is the most effective method among the aforementioned methods. In order to verify the strengthening effectiveness, flexural experiments on the beams strengthened with external tendons using lifting hole anchorage system were carried out. The experiments were conducted on two groups of systems, the existing and the proposed external tendons using lifting hole anchorage system. In addition, An evaluation on ductility of the beams were conducted in this paper.

• Journal of the Ergonomics Society of Korea
• /
• v.14 no.1
• /
• pp.1-7
• /
• 1995

In this paper, the effectiveness and accuracy of using the direct estimation method were investigated in determining a worker's lifting capacity or the maximum acceptable weight of lifting (MAWOL) of symmetrical fifting tasks in the workplace were investigated. Six lifting tasks involving two vertical fifting start-end points (0-80cm, 47-102cm) and three lifting frequencies (1, 2, and 4 lifts/minute) were studied. Ten young, male subjects performed the six lifting tasks to predict the MAWOL using the psychophysical method and the direct estimation method. The main results indicated that there were no significant differences between the MAWOLs determined by the two methods except for the lifting frequency of 4 lifts/minute. Analysis of variance was performed on the task rating data to check the consistency of the task rating across subjects, which revealed no significant difference.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.1-9
• /
• 1999

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was $2562.71ml-O_2/min$ and the one for treadmill exercise was $2874.89ml-O_2/min$. The value of lifting PWC increased from $1774.07ml-O_2/min$ to $2296.76ml-O_2/min$ as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWC increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWC, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.286-294
• /
• 1997

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was 2562.71 ml-O$_{2}$/min and the one for treadmill exercise was 2874.89 ml-0$_{2}$/min. The value of lifting PWC increased from 1774.07ml-0$_{2}$/min to 2296.76 ml-0$_{2}$/min as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWCs increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWCs, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it is appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Journal of the Ergonomics Society of Korea
• /
• v.16 no.3
• /
• pp.23-36
• /
• 1997

The objective of this study was to make a comparison of the oxygen consumption rates during the lifting activities and the physiological criteria of the recommended weights of RWL, AL, and MPL by NIOSH Guideline. The physical Work Capacity (PWC) based on the bicycle ergometer was 2562.71ml/min, and the one based on the treadmill was 2874.89ml/min for the college male students of Korea. Lifting activities with four different lifting frequencies(2, 5, 8, 11 lifts/min) for one lifting range from floor to 76cm height were studied. The oxygen consumption rates and the heart rates were measured or recorded while subjects were lifting the weight of RWL, AL, and MPL. The heart rates and the oxygen consumption rates increased as the frequency increased from 2 to lifts/min. However, those slightly decreased at the frequency of 11 lifts/ min. The measured oxygen consumption rates were ranging from 2.3% to 29.6% higher than the physiological criteria 620, 700, and 1000ml/min, respectively, of the RWL, AL, and MPL for all the lifting frequencies (5, 8, 11 lift/min) except 2 lifts/min. It si suggested that the physiological criteria of NIOSH Guideline should be based on the lifting PWC, which can consider the type of lifting activity and the frequency of the task, rather than using the PWC by ergometer or treadmill. The measured oxygen consumption rates were ranging from 13.26% to 40.11% higher than the values estimated using the models by Garg and Kim. From these findings it is suggested that the NIOSH Equation should not be directly applied to Korean without resonable modifications.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.89-93
• /
• 2009

The muscular-skeletal disorders that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. This study used the psychophysical approach to determine the maximum acceptable weight(MAWL) for seven young male subjects, and used isometric and isoinertial strength variables as predictors to develop prediction models. Also, the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWL. Three different lifting frequencies(1, 3, 5lifts/min) with two lifting range from floor to knuckle height and knuckle to shoulder height for one hour's work shift using free style lifting technique were studied. These results may not only provide scientific data in establishing the safety standards for Korean workers' lifting tasks, but also contribute preventing the rapidly increasing muscular-skeletal disorders lately on the industrial site.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.3
• /
• pp.185-193
• /
• 2008

In order to improve work efficiency in high-rise apartment building construction, it is required to establish the major criteria and practical method for selecting the construction lifts. It is necessary to analyze work efficiency and economic feasibility depending on speed, size and capacity of lifting equipment and characteristics of construction projects. The purpose of this research is to develop the fundamental process and information for selecting the lift in order to plan and manage the material lifting and laborers' vertical transporting in the high-rise apartment building projects more effectively. In order to satisfy the objective of the research, work performance of the lifting machines with different speed and carrying capacity is analyzed under the practical constraints. In addition, potential economic evaluation is conducted. One of the significant findings of the research is that the mid-speed lift shows 43% improvement in work efficiency compared with the low-speed lift. The results of the research will be used as the basis for developing the further optimal lifting management system.