• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.423-429
• /
• 2012

밀러 사이클은 저배기 및 고효율 달성으로 Tier II 규제뿐만 아니라 $CO_2$ 저감을 동시에 달성할 수 있는 기술로 알려져 있다. 그러나 이를 위해서는 충분한 흡입공기량이 확보되어야 하며 흡기계통은 공기저항을 최소화할 수 있는 형상으로 개선되어야 한다. 본 연구에서 흡기계통 설계 및 사이클 해석에 활용하기 위한 기초 자료 확보를 위해 흡기밸브의 유량계수를 측정하였다. 유량계수 측정에는 정상유동장치를 이용하였다. 중속 박용기관에 사용되는 포핏 밸브를 대상으로 실험을 수행한 결과, 흡기밸브 유량계수는 밸브양정의 증가에 따라 약 0.62까지 지속적으로 증가하는 경향이며 행정/보어 비와는 무관한 흡기밸브 고유의 특성이 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.157-157
• /
• 2010

Vertical-structure light-emitting diodes (V-LEDs) by laser lift-off (LLO) have been exploited for high-efficiency GaN-based LEDs of solid-state lightings. In V-LEDs, emitted light from active regions is reflected-up from reflective ohmic contacts on p-GaN. Therefore, silver (Ag) is very suitable for reflective contacts due to its high reflectance (>95%) and surface plasmon coupling to visible light emissions. In addition, low contact resistivity has been obtained from Ag-based ohmic contacts annealed in oxygen ambient. However, annealing in oxygen ambient causes Ag to be oxidized and/or agglomerated, leading to degradation in both electrical and optical properties. Therefore, preventing Ag from oxidation and/or agglomeration is a key aspect for high-performance V-LEDs. In this work, we demonstrate the enhanced thermal stability of Ag-based Ohmic contact to p-GaN by reducing the thermal compressive stress. The thermal compressive stress due to the large difference in CTE between GaN ($5.6{\times}10^{-6}/^{\circ}C$) and Ag ($18.9{\times}10^{-6}/^{\circ}C$) accelerate the diffusion of Ag atoms, leading to Ag agglomeration. Therefore, by increasing the additional residual tensile stress in Ag film, the thermal compressive stress could be reduced, resulting in the enhancement of Ag agglomeration resistance. We employ the thin Ni layer in Ag film to form Ni/Ag mutli-layer structure, because the lattice constant of NiO ($4.176\;{\AA}$ is larger than that of Ag ($4.086\;{\AA}$). High-resolution symmetric and asymmetric X-ray diffraction was used to measure the in-plane strain of Ag films. Due to the expansion of lattice constant by oxidation of Ni into NiO layer, Ag layer in Ni/Ag multi-layer structure was tensilely strained after annealing. Based on experimental results, it could be concluded that the reduction of thermal compressive stress by additional tensile stress in Ag film plays a critical role to enhance the thermal stability of Ag-based Ohmic contact to p-GaN.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.33-33
• /
• 1999

The Coanda effect is the tendency for a fluid jet to atach itself to an adjacent surface and follow its contour without causing an appreciable flow separation. The jet is pulled onto the surface by the low pressure region which develops as entrainment pumps fluid from the region between the jet and the surface. Then the jet is held to the wall surface by the resulting radial pressure gradient which balance the inertial resistance of the jet to turning. The jet may attach to the surface and may be deflected through more than 180 dog, when the radius of the Coanda surface is sufficiently large compared to the height of the exhaust nozzle. However, if the radius of curvature is small, the jet turns through a smaller angle, or may not attach to the surface at all. In general, the limitations in size and weight of a device will limit the radius of the deflection surface. Thus much effort has been paid to improve the jet deflection in a variety of engineering fields. The Coanda effect has long been applied to improve aerodynamic characteristics, such as the drag/lift ratio of flight body, the engine exhaust plume thrust vectoring, and the aerofoil/wing circulation control. During the energy crisis of the seventies, the Coanda jet was applied to reduce vehicle drag and led to drag reductions of as much as about 30% for a trailer configuration. Recently a variety of industrial applications are exploiting another characteristics of the Coanda jets, mainly the enhanced turbulence levels and entrainment compared with conventional jet flows. Various industrial burners and combustors are based upon this principle. If the curvature of the Coanda surface is too great or the operating pressure too high, the jet flow will break away completely from the surface. This could have catastrophic consequences for a burner or combustor. Detailed understanding of the Coanda jet flow is essential to refine the design to maximize the enhanced entrainment in these applications.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.51-59
• /
• 1993

A 4${\times}10^{19}cm^{3}$ carbon-doped base AlGaAs/GaAs HBY was grown using carbontetracholoride(CCl$_4$) by atmospheric pressure MOCVD. Abruptness of emitter-base junction was characterized by SIMS(secondary ion mass spectorscopy) and the doping concentration of base layer was confirmed by DXRD(double crystal X-ray diffractometry). Mesa-type HBTs were fabricated using wet etching and lift-off technique. The base sheet resistance of R$_{sheet}$=550${\Omega}$/square was measured using TLM(transmission line model) method. The fabricated transistor achieved a collector-base junction breakdown voltage of BV$_{CBO}$=25V and a critical collector current density of J$_{O}$=40kA/cm$^2$ at V$_{CE}$=2V. The 50$\times$100$\mu$$^2$ emitter transistor showed a common emitter DC current gain of h$_{FE}$=30 at a collector current density of JS1CT=5kA/cm$^2$ and a base current ideality factor of ηS1EBT=1.4. The high frequency characterization of 5$\times$50$\mu$m$^2$ emitter transistor was carried out by on-wafer S-parameter measurement at 0.1~18.1GHz. Current gain cutoff frequency of f$_{T}$=27GHz and maximum oscillation frequency of f$_{max}$=16GHz were obtained from the measured Sparameter and device parameters of small-signal lumped-element equivalent network were extracted using Libra software. The fabricated HBT was proved to be useful to high speed and power spplications.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.313-318
• /
• 2003

The development of new materials with light weight and high strength has become vital to the machinery, aircraft and auto industries. However, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress(in this thesis). The compressive residual stress was imposed on the surface according to each shot velocity(57, 70, 83, 96 m/sec) based on Shot-peening, which is the method of improving fatigue lift: and strength. By using the methods mentioned above, I arrived at the following conclusions 1. The fatigue crack growth rate(da/dN) of the Shot-peened material was lower than that of the Un-peened material. And in stage I, ${\Delta}K_{th}$, the threshold stress intensity factor, of the shot-peen processed material is high in critical parts unlike the Un-peened material. Also m, fatigue crack growth exponent and number of cycle of the Shot-peened material was higher than that of the Un-peened material. That is concluded from effect of da/dN. 2. Fatigue life shows more improvement in the Shot-peened material than in the Un-peened material. And compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2197-2202
• /
• 2014

본 연구에서는 팔라듐 (Pd) 나노선으로 구성된 센서의 고감도 수소검지능력에 대해서 조사하였다. 팔라듐 나노선은 알루미늄 양극 산화막 (AAO : anodic aluminum oxide) 채널에 전기도금법을 이용하여 성장시켰으며, 수산화나트륨 수용액을 이용하여 나노선을 분리한 후 포토 리소그래피와 전자빔 리소그래피 공정 및 리프트오프 공정을 사용하여 금속나노선 수소센서를 제작하였다. 2%의 수소에서는 1.92% 의 민감도가, 0.1% 의 수소에서는 0.18% 의 민감도가 변하는 고감도 특성을 얻었으며, 이는 팔라듐 나노선의 저항은 수소의 흡착과 탈착에 의존하기 때문이다. 따라서 상온에서 고감도 수소 가스 검출을 위하여 팔라듐 나노선이 응용될 수 있을 것으로 기대한다.

• Wind and Structures
• /
• 제23권6호
• /
• pp.559-575
• /
• 2016

In order to investigate the influence of different blade positions on aerodynamic load and wind loads and load-effects of large scale wind turbine tower under the halt state, we take a certain 3 MW large scale horizontal axis three-blade wind turbine as the example for analysis. First of all, numerical simulation was conducted for wind turbine flow field and aerodynamic characteristics under different halt states (8 calculating conditions in total) based on LES (large eddy simulation) method. The influence of different halt states on the average and fluctuating wind pressure coefficients of turbine tower surface, total lift force and resistance coefficient, circular flow and wake flow characteristics was compared and analysed. Then on this basis, the time-domain analysis of wind loads and load-effects was performed for the wind turbine tower structure under different halt states by making use of the finite element method. The main conclusions of this paper are as follows: The halt positions of wind blade could have a big impact on tower circular flow and aerodynamic distribution, in which Condition 5 is the most unfavourable while Condition 1 is the most beneficial condition. The wind loads and load-effects of disturbed region of tower is obviously affected by different halt positions of wind blades, especially the large fluctuating displacement mean square deviation at both windward and leeward sides, among which the maximum response occurs in $350^{\circ}$ to the tower top under Condition 8; the maximum bending moment of tower bottom occurs in $330^{\circ}$ under Condition 2. The extreme displacement of blade top all exceeds 2.5 m under Condition 5, and the maximum value of windward displacement response for the tip of Blade 3 under Condition 8 could reach 3.35 m. All these results indicate that the influence of halt positions of different blades should be taken into consideration carefully when making wind-resistance design for large scale wind turbine tower.

• 한국농공학회지
• /
• 제40권4호
• /
• pp.109-119
• /
• 1998

Recently pipe-framed greenhouses are widely constructed on domestic farm area. These greenhouses are extremely light-weighted structures and so are easily damaged under strong wind due to the lack of uplift resistance of foundation piles. This experiment was carried out by laboratory soil tank to investigate the displacement be haviors of cylindrical pile foundations according to the uplift loads. Tested soils were sampled from two different greenhouse areas. The treatment for each soil type are consisted of 3 different soil moisture conditions, 2 different soil depths, and 3 different soil compaction ratios. Each test was designed to be repeated 2 times and additional tests were carried out when needed. The results are summarized as follows : 1. When the soil moisture content are low and/or pile foundations are buried relatively shallow, ultimate uplift capacity of foundation soil was generated just after begining of uplift displacement. But under the high moisture conditions and/or deeply buried depth, ultimate up-lift capacity of foundation soil was generated before the begining of uplift displacement. 2. For the case of soil S$_1$, the ultimate uplift capacity of piles depending on moisture contents was found to be highest in optimum moisture condition and in the order of air dryed and saturated moisture contents. But for the case of soil S$_2$, the ultimate uplift capacity was found to be highest in optimum moisture condition and in the order of saturated and air dryed moisture contents. 3. Ultimate uplift capacities are varied depending on the pile foundation soil moisture conditions. Under the conditions of optimum soil moisture contents with 60cm soil depth, the ultimate uplift capacity of pile foundation in compaction ratio of 80%, 85%, and 90% for soil 51 are 76kg, 115kg, and 155kg, respectively, and for soil S$_2$are 36kg, 60kg, and 92kg, respectively. But considering that typical greenhouse uplift failure be occurred under saturnted soil moisture content which prevails during high wind storm accompanying heavy rain, pile foundation is required to be designed under the soil condition of saturated moisture content. 4. Approximated safe wind velosities estimated for soil sample S$_1$and S$_2$are 32.92m/s and 26.58m/s respectively under the optimum soil condition of 90% compaction ratio and optimum moisture content. But considering the uplift failure pattern under saturated moisture contents which are typical situations of high wind accompanying heavy rain, the safe wind velosities for soil sample S$_1$and S$_2$are not any higher than 20.33m/s and 22.69m/s respectively.

• 생명과학회지
• /
• 제24권9호
• /
• pp.927-934
• /
• 2014

혈근초(Sanguinaria canadensis) 뿌리에서 유래된 benzophenanthridine alkaloid의 일종인 sanguinarine은 항균, 항산화 및 항암작용 등 다양한 생리활성을 지니고 있는 것으로 알려져 있다. 비록 TRAIL이 암세포에서는 apoptosis를 유도하지만 정상세포에서는 세포독성을 나타내지 않는다는 큰 장점으로 제 2 임상 단계에서 유의적인 성과를 이루었지만, TRAIL 저항성을 극복해야 하는 큰 어려움이 남아있다. 본 연구실에서는 TRAIL이 세포독성을 나타내지 않는 범위의 sanguinarine과 혼합처리에 의하여 TRAIL 저항성 AGS 위암세포에서 apoptosis를 유발하였음을 보고한 바 있으며, 본 연구에서는 sanguinarine의 TRAIL 저항성 관련 극복에 대한 추가적인 기전 연구를 실시하였다. 본 연구의 결과에 의하면, sanguinarine과 TRAIL의 혼합처리는 각각의 단독 처리에 비하여 AGS 세포의 증식억제 및 apoptosis 유도의 상승 효과가 있었으며, 이를 MTT assay, agarode gel 전기영동, 염색질 응축 현상 및 flow cytometry 분석을 통하여 확인하였다. 또한 sanguinarine과 TRAIL의 혼합처리는 DR5의 발현을 증가시켰으며, ROS의 생성을 촉진시켰다. 그러나 동일 조건에서 MAPKs 신호 전달계에는 큰 영향을 주지 않았다. 아울러 ROS 생성을 인위적으로 차단하였을 경우, sanguinarine과 TRAIL의 혼합처리에 의한 생존도 저하가 유의적으로 회복되었다. 이러한 결과는 sanguinarine과 TRAIL이 DR5의 발현 증가와 ROS의 생성을 촉진시킴으로서 apoptosis 신호를 활성화하였음을 의미하는 결과로서 TRAIL 저항성 극복을 위한 sanguinarine 활용의 유용성을 보여주는 것이다.

• KSBB Journal
• /
• 제10권3호
• /
• pp.241-248
• /
• 1995

염색가공 폐수 중 난분해성 물질이 PYA를 처리 하기 위하여, 한천-acrylamide를 이용한 bead를 제 조한 후 air-lift 반응기에서 연속실험을 행하였다. 합성폐수의 PYA놓도가 $3,100mg/\ell$. 체류시간 24hr일 때 유출수의 농도는 $4500mg/\ell$ 이며, 제거효율은 85% 이상을 나타내었다. 실제 호발폐수의 경우 PYA 및 COD농도가 $3,253mg/\ell$, $4,500mg/\ell$일 때, 체류시간 24hr에서 유출수의 농도는 $840mg/\ell, 480mg/\ell$이며, 제거효 율은 81.3%와 85.2%로 각각 나타났다. bead의 지름이 lmm일 때는 내부의 미생물 성장 이 양호하였으나 bead의 지름이 2mm일 때는 기질 과 산소전달저항에 의하여 반지름의 48% 이상은 미 생물의 성장이 저해를 받았다. 고정화 반응기에서 전체 기질 제거속도 중 bead 내 고정화 cell의 제거 분율은 평균 70%로 나타났다. 현탁 반응기에서 희석율 $0.083hr^{-1}$ 이상에서는 기질 이용속도가 감소하였으나 고정화 반응기에서는 희석율 $0.125hr^{-1}$까지 거의 선형척으로 증가하였다. PYA 제거속도식에서 포화상수 $K_s=6.60(g PVA/\ell)$와 최대 비기질 이용속도 k=0.175(g PVA/g cell.hr)를 얻었다.