• The Safety technology
• /
• no.172
• /
• pp.20-21
• /
• 2012

경기도 파주시 월롱면에 위치해 있는 LG Display 파주공장. 이곳은 연면적이 30만8,000$m^2$에 달할 정도로 상주하는 근로자는 24,000여 명에 이를 만큼 많다. 또 주공정인 LCD 제조뿐 아니라 신규라인 공장의 건설공사 등도 한창 진행 중에 있다. 다시 말하면 안전관리팀만으로는 모든 현장의 위험요소를 제거해나가고 안전대책을 세우는 것이 사실상 불가능한 것이다. 하지만 이런 상황 속에서도 LG Display 파주공장은 안전관리가 완벽하다는 주위의 평을 듣고 있다. 공장 관계자들은 이같은 호평을 받을 수 있는 가장 큰 이유를 'LG Display 파주안전학교' 에서 찾고 있다. 파주안전학교에서 양성된 안전지킴이들이 주축이 되어 각 현장에서 근무환경 개선, 자체 안전교육 실시 등 다양한 활동을 펴나가고 있기 때문에 제대로 된 안전관리가 이뤄지고 있다는 것이다. 이처럼 LG Display 파주공장에서 자율안전관리체계가 뿌리 내리는데 중심 역할을 하고 있는 'LG Display 파주안전학교'를 찾아가 봤다.

• 한국IT서비스학회:학술대회논문집
• /
• 2008.05a
• /
• pp.248-253
• /
• 2008

현재 IT서비스업체에서 주요사업으로 수행중인 S/W의 개발분야에서 S/W공학은 마치 현실과 동떨어진 이론, 지식으로만 인식되고 실제 S/W공학의 효과를 인식하고 활용하는 사례가 극히 드문 것이 현실이다. LG CNS에서는 이러한 현실에서 실용적인 S/W공학을 재정의하고 이를 현장에 적용시키기 위하여 사업수행을 통해 얻은 S/W공학 측면의 사례를 발굴하여 이를 전사적으로 확산시키는 활동을 진행하고 있다. 본 논문에서는 IT서비스의 전사적 측면에서 실용적인 S/W공학의 효과성을 재인식시키기 위한 방법론 측면의 접근사례를 소개한다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.764-766
• /
• 2004

최근 모든 산업분야에서 축소화 및 대용량화가 요구되고 있으며, 전력기기 분야에서도 보다 작은 크기의 제품에 보다 큰 용량의 전류를 차단 또는 통전시키는 제품 개발이 활발히 진행되고 있다. 이러한 발열밀도가 높은 전력기기의 실정 설계에는 높은 정확도를 가지며, 그리고 효율적인 열설계가 가능한 방법이 점점 중요해지고 있다. 본 연구에서는 전력기기 열설계를 위한 해석적 방법을 구축하기 위하여 기초현상 파악 등에 적합한 3차원 CFD(Computational Fluid Dynamics) 상용 프로그램과 설계 초기 단계에서 parameter 검토 등 근본적인 설계에 적합한 열회로망법을 이용하여 자체 개발한 프로그램을 이용하여 배선용 차단기의 열설계에 관하여 검토하였다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.962-966
• /
• 1996

A conventional PI controller does not provide a proper response in face of various kinds of load variation. In this paper, three types of fuzzy-PI hybrid control scheme are proposed in order to improve the performance of the PI controller. The proposed control schemes are applied to the speed controller of AC servo motor systems. The effectiveness of the proposed methods is shown by computer simulation and the advantage of each control scheme is discussed.

• Laser Solutions
• /
• v.18 no.2
• /
• pp.11-13
• /
• 2015

Pressure-drop in a micro-channel is critical when a hole diameter is less then 100um with the high aspect ratio, more than 40. To minimize these pressure loss for micro-channel applications is important and there would be the best hole diameter, taper angle, and their combinations. In this work, the parametric study for laser drilling of anodized material is conducted to obtain the micro-channel hole with high aspect ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.77.2-77
• /
• 2001

Profibus-DP is the performance-optimized version of Profibus, specifically dedicated to time-critical communication between automation systems and distributed peripherals. It is included into the International Fieldbus Standard IEC 61158. In this paper, The ASIC for Profibus-DP simple and intelligent slave is proposed and implemented. It can be fully compatible with Siemens LSPM2 as a pin-to-pin base and it also has a high-level function that can replace current intelligent slave boards with one chip. Also it can be used without special OS coding unlike SPC3 of Siemens.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1031-1033
• /
• 1999

The performance of cable joints for extra high voltage XLPE cable system is rapidly advancing combined with the development of insulation materials. The current trend of joints is in the direction of requiring less jointing techniques and installation time. This paper describes the performance of currently used joints regarding to their practical aspects and analyses design and manufacturing techniques for Pre-Mold Joint and Pre-fabricated Joint Box. Especially, basic tests and their results to obtain the design Parameter of PMJ are introduced.

• Laser Solutions
• /
• v.14 no.3
• /
• pp.7-11
• /
• 2011

As an active emission display using emissive polymer has had much attention recently, needs for a selective patterning of emissive layer for those displays have been increased abruptly. Therefore, the various laser sources in terms of its wavelength has been used for laser direct patterning. In this work, the feasibility of those processes is examined using numerical analysis and the experimental investigation. A sample has multi-layered structure, emissive polymer on aluminum which is deposited on a glass substrate. Key factors for optimizing the laser patterning of the emissive polymer are considered into the control of ablation products, large-sized particle, and the choice of the appropriate wavelength for minimizing the heat affected zone and the remnant layer.

• Journal of Veterinary Clinics
• /
• v.32 no.1
• /
• pp.28-35
• /
• 2015

Aim of this study is demonstrate the feasibility of Laparoscopic gastrostomy (LG) tube placement in dogs by comparing with percutaneous endoscopic gastrostomy (PEG) tube placement, based on operative time, complications and gastro-peritoneal adhesion evaluation. Eight intact male beagle dogs were used in this study. Tri-Funnel Replacement Gastrostomy tube (Bard Inc., USA) of 20 Fr was used for LG technique and PEG kit (Ponsky "Pull" PEG Kit$^{(R)}$, Bard Inc., USA) with soft silicone retention dome consisting of a 20 Fr gastrostomy tube was used. Feeding via gastrostomy tube was performed in two weeks, maintenance energy requirement (MER) divided into 3 separate feeding. LG and PEG were evaluated at intraoperative, postoperative and postmortem period. Mean operative time for the PEG group was significantly shorter when compared with the LG group (p < 0.05). Successful maintenance of gastrostomy tube was confirmed in all dogs. Gastric and peritoneal wall adhesions were formed successfully in each group. The mean adhesion length (AL) and width (AW) were significantly larger in LG group compared with in PEG group (p < 0.05). The mean adhesion distance (AD) was not significantly different between two groups (p = 0.182). Consequently, LG is an effective minimally invasive, safe and easy to perform technique for providing enteral nutritional support in dogs.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.762-764
• /
• 2001

In order to evaluate the structural safety from an earthquake, the seismic analysis of large structures such as GIS in electric power substations and equipments for nuclear power plant has been carried out because the seismic qualification by experiment is very expensive. This paper presents the seismic analysis of the 72.5kV GIS produced by LGIS. The finite element model of the GIS is developed and analyzed using ANSYS. The model consists of beam elements for the enclosures and mass elements for the conductors and the mechanisms. Using the transient analysis under seismic load, the structural safety is verified.