• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.21-42
• /
• 2015

This paper shows the case of the evolution of Korean e-Government services in the theoretical lens of Actor-Network Theory and Structuration Theory. It presents how human actors (i.e. presidents and the central administrations) and non-human actors (i.e. law, standards, and relay systems) have established as the one network together, and how this network affects the evolution of Korean e-Government services. This case demonstrates in public sector can adopt not only Actor-Network Theory, but also Structuration Theory to explain both micro and macro contexts. The practical implications are given especially for the developing countries in pursuing the rapid development process of e-Government services.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.418-425
• /
• 1998

Stereo cameras are the most widely used sensing systems for automated machines including robots to interact with their three-dimensional(3D) working environments. The position of a target point in the 3D world coordinates can be measured by the use of stereo cameras and the camera calibration is an important preliminary step for the task. Existing camera calibration techniques can be classified into two large categories - linear and nonlinear techniques. While linear techniques are simple but somewhat inaccurate, the nonlinear ones require a modeling process to compensate for the lens distortion and a rather complicated procedure to solve the nonlinear equations. In this paper, a method employing a neural network for the calibration problem is described for tackling the problems arisen when existing techniques are applied and the results are reported. Particularly, it is shown experimentally that by utilizing the function approximation capability of multi-layer neural networks trained by the back-propagation(BP) algorithm to learn the error pattern of a linear technique, the measurement accuracy can be simply and efficiently increased.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.135-143
• /
• 2004

The Human body is subject to two patterns of senescence, both of which are represented in the eye and vision. This article discusses the anatomical and physiological changes in anterior and posterior segments which occur with age. The areas covered include the globe, lids, tears, conjunctiva, cornea, sclera, anterior chamber angle, iris, lens, choroid, vitreous and retina. A sample of 219 individuals between the ages of 50 and 79 years was tested with case history, slit lamp examination, palpebral fissure, horizontal visible iris diameter(HVID) and pupil size. The palpebral fissure decreases with age while HVID remains constant in all age classes. This study suggests that an understanding of anatomical and physiological changes which occur with age is helpful to all eye clinicians because the aging process affects all of the ocular tissues.

• Korean Journal of Materials Research
• /
• v.23 no.8
• /
• pp.453-461
• /
• 2013

Controlling the stick and slip motions of the contact lines in a confined geometry comprised of a spherical lens with a flat substrate is useful for manufacturing polymer ring patterns. We used a sphere on a flat geometry, by which we could control the interfaces of the solution, vapor and substrate. By this method, hundreds of concentric ring-pattern formations of a linear conjugated polymer, poly [2-methoxy-5-(2-thylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), were generated with excellent regularity over large areas after complete solvent evaporation. Subsequently, the MEH-PPV ring patterns played a role as a directed template to organize highly regular concentric rings of single-walled carbon nanotubes(SWCNTs); when a droplet of the SWCNT suspension in water was casted onto the prepared substrate, hydrophobic polymer patterns confined the water dispersed SWCNTs in between the hydrophilicized $SiO_2/Si$ substrate. As the solvent evaporated, SWCNT-rings were formed in between MEH-PPV rings with controlled density. Finally, we used a lift-off process to produce SWCNT patterns by the removal of a sacrificial polymer template with organic solvent. We also fabricated a field effect transistor using self-assembled SWCNT networks on a $SiO_2/Si$ substrate.

• Korean journal of communication and information
• /
• v.38
• /
• pp.73-118
• /
• 2007

The purpose of this research is to figure out the effects of media framing and image restoration strategies on the public's crisis perceptions. The literature review revealed that the public perceives crises through the media lens and image restoration strategies heralded by the organization interact with media frames in the process of the public's perceiving the crisis. The news content analysis and the experiment were conducted to accomplish the research purpose. Also food-related crises were selected for a research case because they have a great impact on the society. The content analysis showed that image restoration strategies designed by the crisis organization tend to be conveyed through anecdote-type news frames. Most image restoration strategies were close to defensive communications and not differentiated by the crisis type. The experiment outcomes demonstrated that the organization's image restoration strategies were not consistent with what the public preferred in the crisis situation. Such public perceptions also were changed according to media frames. Media frames and image restoration strategies have an interaction effect on the public's crisis perception.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.1
• /
• pp.71-81
• /
• 2009

Die steel for plastic molding were used as mold material of automobile parts and electronic component industry. The material of this paper has superior to mechanical properties, such as repair weldability, corrosion resistance and high temperature strength, required mold parts for semitransparent. Laser-induced surface hardening technology is widely adopted to improver fatigue life and wear resistance via localized hardening at the surface of mold parts. The objective of this research work is to investigate on the characteristics of surface hardening of the laser process parameters, such as beam travel speed, laser power and defocsued spot position, for the case of die steel for plastic molding. Lens for surface hardening of large area is plano-convex type with elliptical profile to maintain uniform laser irradiation. According to the experimental results, large size of hardened layer at the surface of die steel for plastic molding was achieved, and microstructure of this layer was lath martensite. Optimal surface status and mechanical property of hardened layer could be obtained at 1095Watt, $0.25{\sim}0.3m/min$, 0mm (focal length: 232mm) for laser power, beam travel speed, and focal position. Where, heat input was $0.793{\times}10^{3}J/cm^2$, and width of hardened layer was 27.58mm.

• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2004

The collimator is necessary for the assembly and evaluation of high resolution satellite telescope. Traditionally, the off-axis paraboloid has been used as a collimator. However, it has some disadvantages in that it can suffer from air turbulence when the focal length of a collimator is long, which may result in some error in the measurement. In contrast, since the Cassegrain type collimator folds the beam, it occupies smaller space compared to the off-axis paraboloid for the same focal length. This can reduce the air turbulence, which can improve the measurement accuracy. In this paper, we explain the process of design and manufacturing of a diameter 450 mm Cassegrain type collimator, to evaluate the diameter 300 mm satellite telescope. After assembly of primary and secondary mirrors, the final wavefront error of the collimator was 0.07λ(λ=633 nm), which is the diffraction limit.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.106-115
• /
• 2002

Growth characteristics of micro carbon structures fabricated by laser-assisted chemical vapor deposition are studied. Argon ion laser and ethylene were used as the energy source and reaction gas, respectively, to grow micro carbon rod through pyrolytic decomposition of the reaction gas. Experiments were performed at various conditions to investigate the influence of process parameters on growth characteristics such as the diameter or growth rate of the micro carbon rod with respect to reaction gas pressure and incident laser power. Reaction gas pressure in experiments ranges from 200 to 600Torr and the incident laser power from 0.3 to 3.8W. For these conditions, the diameter of the rod increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below IW. For a constant reaction gas pressure, the growth rate increase with Increasing laser power, but the rate of increase decreases gradually, implying that the chemical vapor deposition condition changes from a kinetically-limited regime to a mass-transport-limited regime. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 287${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated..

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.119-126
• /
• 2013

In this paper, we propose a chromatic aberration removal algorithm in image capture devices, which considers local properties of the image. Chromatic aberration is generated by the fact that the refractive index of the lens is different for different wavelengths, which produces color artifacts on strong edge due to misalignment of RGB channels. Under the characteristics of the artifacts, the proposed algorithm first estimates the regions with the apparent color artifacts as the neighborhoods of the strong edge. In the regions, the proposed algorithm removes the color artifacts by matching the edges of RGB channels. The widely used conventional methods based on global image warping could not remove the color artifacts of longitudinal chromatic aberration and purple fringing identified by the image sensor, whereas the matching process of the proposed method could reduce them. Experimental results show that the proposed algorithm outperforms the conventional methods on objective and subjective criteria.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1187-1192
• /
• 2001

Objective : The lateral extracavitary approach(LECA) to the thoracolumbar spine is known as one of procedure which allows not only direct vision of pathologic lesion, but also ventral decompression, and dorsal fixation of the spine through the same incision. However, some drawbacks of LECA, including the technically- demanding, time-consuming, unfamiliar surgical anatomy and excessive blood loss, make surgeons to hesitate to use this approach. This study is to provide the surgical anatomy of LECA using cadavers, for detailed informations when LECA is considered for the surgery. Methods : We performed the 10 cadaveric studies, 7 male and 3 female, and careful dissection was carried out on right side of thoracolumbar region, except one for thoracic region. The photographs with micro-lens were taken to depict the close-up findings and for demonstrating detailed anatomy. Results : The photographs and hand-drawings demonstrated the relationships among the musculature, segmental vessels and nerve roots seen during each dissection plane. The lateral branches of dorsal rami of spinal nerve and the transverse process were confirmed to be the most important landmark of this approach. Conclusion : We concluded that detailed anatomical findings for LECA through this step-by-step dissection would be useful during operative intervention to reduce the intraoperative complications in LECA.