• Journal of Korean Society of Forest Science
• /
• v.12 no.1
• /
• pp.31-43
• /
• 1971

In order to examine the taxonomic difference between the type of Pinus parviflora S. et Z. native to the Dagelet Island and the type of the species introduced to a number of places of the inland of South Korea, investigations on principal characters of needle, cone and seed were made with a hope to obtain informations on the evaluation of the species for possible use in the reforestation program in Korea in the future. Pinus parviflora is belonged to the Sub-genus Haploxylon of Genus Pinus and it has been speculated among dendrologists that this speoies is not monotypic. 308 rendomly selected trees from 8 different elevations of a natural stand of P. parviflora in the Dagelet Island, and 168 trees of P. parviflora growing at 15 different locations of the inland of South Korea were employed as samples along with 300 trees of P. koraiensis as control. The results obtained are summarized as follows: 1. The needle length of the Pinus parviflora of the Dagelet Island is longer than that of the species growing in the inland by 21-35 percent with statistical significancy. (Table 2) 2. In the cross section of needle, no resin canal was observed in about 50-70 percent of the sample trees of the Dagelet Island, whereas the resin canals appearing at external in most cases were observed in all sample trees from the inland. Consequently, the number of resin canals per needle was 0.4-0.9 with the Dagelet Island type and 2.0-2.7 with the inland type and these differences were statistically significant. (Table 3, Fig.2) 3. The Pinus parvviflora type of the Dagelet Island bas yellowish brown cones, and the Pinus parviflora type of Suwon and Kwangyang has redish brown cones. In both the length of cone and the number of cone scale, the difference between the type of the Dagelet Island and the type of the inland was also statistically significant. The cone scales of the Dagelet Island type are slightly opened, whereas the cone scales are widely opened with both of Suwon and Kwangyang type. (Table 4, Fig. 3) 4. the seed color, of the Dagelet Island type is yellowish brown, while it is greyish brown with Kwangyang and Suwon type. In the length and width of seed, the Dagelet Island type showed significantly larger values than that of the inland type. The length of seed was longest with the Kwangyang type being followed by Suwon and the Dagelet Island type in ordar. The seed wing of the Kwangyang type are longer than the seed, while that of the Dagelet Island type is degenerated to be shorter than the seed. (Table 5, Fig. 4) 5. The Pinus parviflora type of the Dagelat Island is similar in many respects to the southern type of Pinus parviflora of Japan except that many has no resin canals in the needle. 6. On the basis of the results obtained in this study, it may be concluded that the type of Pinus parviflora of the Dagelet Island is significantly different from the type of the species introduced to the inland and that there is no recognizable variation between the population of the different altitude of the Dagelet Island and the individual variation within population is also negligible. In the light of the high value of the tree not only as an ornamental tree but as an economical tree, The type of Pinus parviflora of the Dagelet Island is considered to be recommendable to be used for the future reforestation program of Korea.

• Korean Journal of Ichthyology
• /
• v.26 no.3
• /
• pp.239-242
• /
• 2014

A single specimen (196.4 mm standard length) of the scorpaenid Hozukius emblemarinus was collected by a bottom trawl from the coastal waters off Ulsan, East Sea, Southern Korea. The specimen is characterized by a deep oblong body, three spines on the lower margin of the eye, a dorsal fin with 12 spines, a head mostly covered with various sizes of scales, and a truncate posterior margin of the caudal fin. This is the first record of H. emblemarinus in Korea; we therefore add the species to the Korean fish fauna and propose the new Korean name, "Dong-hae-keun-nun-bol-rak" for this species.

• Interaction and multiscale mechanics
• /
• v.5 no.3
• /
• pp.229-265
• /
• 2012

Hygroexpansion of wood is a known and undesired characteristic in civil engineering. When wood is exposed to changing environmental humidity, it adsorbs or desorbs moisture and warps. The resulting distortions or - at restrained conditions - cracks are a major concern in timber engineering. We herein present a multiscale model for prediction of the macroscopic hygroexpansion behavior of individual pieces of softwood from their microstructure, demonstrated for spruce. By applying poromicromechanics, we establish a link between the swelling pressure, driving the hygroexpansion of wood at the nanoscale, and the resulting macroscopic dimensional changes. The model comprises six homogenization steps, which are performed by means of continuum micromechanics, the unit cell method and laminate theory, all formulated in a poromechanical framework. Model predictions for elastic properties of wood as functions of the moisture content closely approach corresponding experimental data. As for the hygroexpansion behavior, the swelling pressure has to be back-calculated from macroscopic hygroexpansion data. The good reproduction of the anisotropy of wood hygroexpansion, based on only a single scalar calibration parameter, underlines the suitability of the model. The multiscale model constitutes a valuable tool for studying the effect of microstructural features on the macroscopic behavior and for assessing the hygroexpansion behavior at smaller length scales, which are inaccessible to experiments. The model predictions deliver input parameters for the analysis of timber at the structural scale, therewith enabling to optimize the use of timber and to prevent moisture-induced damage or failure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.54-62
• /
• 2016

Micro plasma thruster (${\mu}PT$) was studied experimentally with a dual-stage micro-hollow cathode discharge (MHCD) plasma. Electrostatic-like acceleration exhibiting more directional and elongated exhaust plume was achieved by a dual layer MHCD at the total input power less than 10 W with argon flow rate of 40 sccm. V-I characteristic indicated that there was an optimal regime for dual-stage operation where the acceleration voltage across the second stage remained constant. Estimated exhaust plume length showed a similar trend to the analytic estimate of exhaust velocity which scales with an acceleration voltage. ${\mu}PT$ with multiple holes exhibited similar performance with single-hole thruster indicating that higher power loading is possible owing to decreased power through each hole. Boltzmann plot of atomic argon spectral lines showed average electron excitation temperature of about 2.6 eV (~30,170 K) in the exhaust plume.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.341-347
• /
• 2007

For the purpose of finding how aircraft noise annoyance response is affected by variables when noise survey is performed, the questionnaire survey is conducted around the Gimpo International Airport in Seoul, Republic of Korea. This residential area is exposed to the aircraft noise and road traffic noise, simultaneously. Research areas are classified according to three different aircraft noise exposure levels expressed in WECPNL, under 75, between 75 and 80, and above 80 WECPNL, on aircraft noise map. The 7-step numerical magnitude with verbal category scales is used to measure the annoyance level. This survey suggests that aircraft noise annoyance is not affected to an important extent by other noise sources(road traffic noise, community noise) and demographic variables(sex, age, education, occupation, dwelling type, length of residence).

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.1-12
• /
• 2003

Nonthermal particles can be produced due to incomplete thermalization at collisionless shocks and further accelerated to very high energies via diffusive shock acceleration. In a previous study we explored the cosmic ray (CR) acceleration at cosmic shocks through numerical simulations of CR modified, quasi-parallel shocks in 1D plane-parallel geometry with the physical parameters relevant for the shocks emerging in the large scale structure formation of the universe (Kang & Jones 2002). Specifically we considered pancake shocks driven by accretion flows with $U_o = 1500 km\;s^{-l}$ and the preshock gas temperature of $T_o = 10^4 - 10^8K$. In order to consider the CR acceleration at shocks with a broader range of physical properties, in this contribution we present additional simulations with accretion flows with $U_o = 75 - 1500 km\;s^{-l}$ and $T_o = 10^4K$. We also compare the new simulation results with those reported in the previous study. For a given Mach number, shocks with higher speeds accelerate CRs faster with a greater number of particles, since the acceleration time scale is $t_{acc}\;{\propto}\;U_o^{-2}$. However, two shocks with a same Mach number but with different shock speeds evolve qualitatively similarly when the results are presented in terms of diffusion length and time scales. Therefore, the time asymptotic value for the fraction of shock kinetic energy transferred to CRs is mainly controlled by shock Mach number rather than shock speed. Although the CR acceleration efficiency depends weakly on a well-constrained injection parameter, $\epsilon$, and on shock speed for low shock Mach numbers, the dependence disappears for high shock Mach numbers. We present the 'CR energy ratio', ${\phi}(M_s)$, for a wide range of shock parameters and for $\epsilon$ = 0.2 - 0.3 at terminal time of our simulations. We suggest that these values can be considered as time-asymptotic values for the CR acceleration efficiency, since the time-dependent evolution of CR modified shocks has become approximately self-similar before the terminal time.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.4
• /
• pp.165-173
• /
• 2017

This study aims at validating simulations of the forced and freely vibrating cylinders at Reynolds number of approximately 500 in order to identify the capability of the CFD code, and to establish the analysis process of the vortex-induced vibration (VIV). The direct numerical and large eddy simulations were employed to resolve the various length scales of the vortices, and the morphing technique was used to consider a motion of the circular cylinder. For the forced vibration case, both in- and anti-phase VIV processes were observed regarding the frequency ratio. Namely, when the frequency ratio approaches to unity, the synchronization/lock-in process occurs, leading to substantial increases in drag and lift coefficients. This is strongly linked with the switch in timing of the vortex formation, and this physical tendency is consistent with that of Blackburn and Henderson (J. Fluid Mech., 1999, 385, 255-286) as well as force coefficients. For the free oscillation case, the mass and damping ratio of 50.8 and 0.0024 were considered based on the study of Blackburn et al. (J. Fluid Struct., 2000, 15, 481-488) to allow the direct comparison of simulation results. The simulation results for a peak amplitude of the cylinder and a shedding mode are reasonably comparable to that of Blackburn et al. (2000). Consequently, based on aforementioned results, it can be concluded that numerical methods were successfully validated and the calculation procedure was well established for VIV analysis with reasonable results.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.3
• /
• pp.162-169
• /
• 2006

Objective : Since some studies have shown that the brain-derived neurotrophic factor(BDNF) has an important role in the pathophysiology of depression, this study investigated the relationship between BDNF genetic polymorphism and the long-term outcome of the antidepressant treatment. Method : One hundred and eight patients with major depressive disorder were evaluated for the long-term outcome(up to 3 years) of antidepressant treatment. The severity and improvement of depression were assessed with the Clinical Global Impression(CGI) Scale. The genotypes of BDNF 196A/G polymorphism in the patients were determined using Restriction Fragment Length Polymorphism(RFLP). Result : The genotypes of 128 patients were investigated and 95 patients of those have been evaluated for 3 years. No significant differences were noted comparing three-genotype groups for CGI scales at baseline, 4 weeks, 8 weeks, 1 year, 2 years and 3 years. Conclusion : This result shows that BDNF polymorphism investigated in this study was not associated with the long-term outcome of the antidepressant treatment. However, further studies with another BDNF polymorphism should be needed.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.2
• /
• pp.1-12
• /
• 2004

The purposes of this study were to investigate the relationship between anthropometric data of foot and other body sizes. to categorize the foot shape of elementary school boys and to find out determinant factors related the foot that enable us to deduce the foot shape and size for the design of more comfortable shoes. Subjects of this study were 249 elementary school boys of age ranged from 6 to 11 residing Seoul and lncheon area. Anthropometric sizes were measured with the direct measurement method using Martin scales and the indirect measurement method using digital photos. Pearson's correlation, factor analysis. cluster analysis. analysis of variance, post-hoc test, and cross tabs were performed for statistical analysis of the data by SPSS program. From the investigation on the relationship between foot-related items and body items, most items of foot measure were significantly related to body size items. However, angle of the foot did not related to other body sizes although other height items and mass items of the foot did have relationships with other body sizes. Results of ANOVA indicated there were significant differences in foot-related items except for items of foot angle and all body anthropometric items by subjects' age. This implicates big toe angle, little toe angle and foot ratio factors are required in sizing shoes besides foot length. On the basis of cluster analysis using factor scores. three different foot shapes were categorized. Type 1 was large and wide foot, Type 2 was small and narrow foot with large toe angle. and Type 3 was medium foot with no deformity on big toe. These three groups show significant differences in almost all measurement items. However, Rorher index and foot angle didn't show any significant differences among groups. This implicates the foot shape can be a determinant of shoe size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.