• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.650-654
• /
• 2007

Induction motors are widely used as a source of driving force in electric vehicles and pulse width modulation (PWM) inverters are applied to their operation. The issue is that insulation of inverter-fed induction motors (IFMs) are more stressed than in line-powered motors by transient voltages. This paper dealt with experimental results on transient voltage produced by the PWM operation of an induction motor. The peak and the dv/dt of transient voltage depending on the length of power feeding cable and operating frequency were investigated. In the experiment, transient voltages up to 3.3PU of the rated-inverter voltage were recorded for the cable length of 50m. As the cable length is increased, the peak voltage appeared at the motor terminals increases. This phenomenon can be explained by the reflection and the transmission of travelling wave. Consequently, special care for the cable length between the motor and the inverter should be taken in the use of IFM to ensure the full life of insulation system.

• Korean Journal of Ichthyology
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2012

The feeding habits of the marbled flounder Pleuronectes yokohamae were studied using 395 specimens collected from January to December, 2010, in the coastal waters off Tongyeong, Korea. The size of P. yokohamae ranged from 10.5 to 38.8 cm in standard length (SL). P. yokohamae is a bottom-feeding carnivore that consumes mainly bivalves, amphipods and polychaetes. Its diet also includes small quantities nemertians, anthozoan, isopods, copepods, tanaidacean, shrimps, crabs and ophiuroids. Our feeding-strategy graphical method reveled that P. yokohamae was a generalized feeder, with a wide niche width. P. yokohamae mainly consumed bivalves, amphipods and polychaetes, and did not show significant ontogenetic changes in feeding habit without size over 22 cm. Prey size did not increase significantly as growing fish size.

• Korean Journal of Environmental Biology
• /
• v.21 no.4
• /
• pp.328-336
• /
• 2003

Biological and ecological characteristics of Diporeia spp. are described including size, growth, life cycle, energy storage, temperature effect, bioturbation, feeding depth and sediment ingestion of Diporeia. Bioaccumulation and toxicity of organic contaminants and trace metals were reviewed in addition to an examination of the relationships among various condition indexes (i.e. wet weight, dry weight and body length) of Diporeia.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.4
• /
• pp.477-484
• /
• 2002

Ninety pre-puberal (6-7 months) female and 15 pre-puberal male Black Bengal goats were collected on the basis of their phenotypic characteristics from different parts of Bangladesh. Goats were reared under semi-intensive management, in permanent house. The animals were vaccinated against Peste Des Petits Ruminants (PPR), drenched with anthelmentics and deeped in 0.5% Melathion solution. They were allowed to graze 6-7 h along with supplemental concentrate and green forages. Concentrates were supplied either 200-300 g/d (low level feeding) or quantity that supply NRC (1981) recommended nutrient (high level of feeding). Different physiological, productive and reproductive characteristics of the breed were recorded. At noon (temperature=$95^{\circ}F$ and light intensity=60480 LUX) rectal temperature and respiration rate of adult male and female increased from 100.8 to $104.8^{\circ}F$ and 35 to 115 breath/min, indicated a heat stress situation. Young female attain puberty at an average age and weight of 7.2$\pm$0.18 months and 8.89$\pm$0.33 kg respectively. Mean age and weight at 1st kidding were 13.5$\pm$0.49 months and 15.3$\pm$0.44 kg respectively. It required 1.24-1.68 services per conception with an average gestation length of 146 days. At low level of feeding the postpartum estrus interval was 37$\pm$2.6 days, which reduced (p<0.05) with high feeding level to 21$\pm$6.9 days. Kidding interval also reduced (p<0.05) from 192 d at low feeding level to 177 d at high feeding level. On an average there were two kiddings/doe/year. Average litter sizes in the 1st, 2nd, 3rd and 4th parity were 1.29, 1.71, 1.87 and 2.17 respectively. Birth weights of male and female kids were 1.24 and 1.20 kg respectively, which increased (p<0.05) with better feeding. Although kid mortality was affected (p<0.05) by dam's weight at kidding, birth weight of kid, milk yield of dam, parity of kidding, season of birth, but pre-netal dam's nutrition found to be the most important factor. Kid mortality reduced from 35% at low level of feeding to 6.5% at high level of feeding of dam during gestation. Apparently, this was due to high (p<0.05) average daily milk yield (334 vs. 556 g/d) and heavier and stronger kid at birth at high feeding level.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.14-21
• /
• 2019

In this paper, we implemented an on-board miniaturization antenna operating 2.4 GHz using MZR(Mu Zero Resonator). It is must be operating under the constraint that the size of the small terminal PCB should be $78{\times}38{\times}0.8mm^3$ and the size of the system should be $63{\times}38{\times}0.8mm^3$ and the size of the radiating part should be $15{\times}38{\times}0.8mm^3$. The feeding structure uses a CPW structure for stable feeding and a feeding point at the upper left of the system board. A magnetic field coupling structure is used for coupling the feeding part and the antenna. The resonance frequency of the MZR is determined by the series inductance and capacitance of the cell, so the gap between the cells, the length of the cell, the length of the interdigital capacitor, and the spacing between the radiation part and the ground plane are analyzed. The antenna was designed and fabricated using the results. The total size of the antenna including the feed structure is $20.8{\times}9.0{\times}0.8mm^3$, and the electrical length is $0.1664{\lambda}_0{\times}0.072{\lambda}_0{\times}0.0064{\lambda}_0$. The measurement result for 10 dB bandwidth, gain and directivity are 440 MHz(18.3%), 0.4405 dB, and 2.722 dB respectively. It is confirmed that the radiation pattern has omnidirectional characteristics and it can be applied to ultra small terminal antenna.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.402-407
• /
• 2013

In this paper, the image processing for flexible disk grinding and the effect of the grinding conditions on the flat zone length of a workpiece are investigated, with the purpose of automating the grinding process. To accomplish this, three issues should be carefully studied. The first is finding the relationship between the flat zone length and the grinding conditions such as the cutting speed and feeding speed. The second is developing a neural network algorithm to predict the flat zone. The third is developing an image processing algorithm to measure the flat zone length of a workpiece. Slope analysis is used to determine straight and curved sections during the image processing. For verification, the estimated length and the length from the image processing are compared with the length measured by a projector. There is a minimum difference of 1.7% between the predicted and measured values. The results of this paper will be useful in compiling a database for process automation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.672-677
• /
• 2010

The goal of this study is to simplify the measurement process of the flat zone length produced by a flexible disk grinding system for the process automation. The image of workpiece in the grinding process is obtained, and the cutting speed and the feeding speed are controlled carefully to maximize the flat zone length. The gradient, the inflection point and the length of the line in the image are calculated, and the length is also measured by using a projector. Processing conditions and inversely proportional to flat zone length was changing. The flat zone length is estimated by Neural network algorithm considering the process conditions with the estimated error range as 0.06~3.61%, the Neural network algorithm for the grinding process estimation is found to be useful for building the process automation database.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.221-226
• /
• 2015

During the study periods, total 143 individuals of Lateolabrax japonicus were collected. Body length (BL) range was 2.0-11.8 cm. Empty stomach occurred in 8.4%. The most abundant prey was copepods. Among copepods, Tigriopus japonicus was the most abundant prey appeared 32.1 in %F. Next important prey was shrimps and mysids. The results of analysis in ontogenetic changes, main prey of two small size classes (2.0-3.9 cm, 4.0-5.9 cm) were copepods. Thereafter, copepods percentage was decreased, but shrimps, mysids, fishes percentage was increased by increasing body length from 8.0 cm< size class.

• Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.169-180
• /
• 2023

Oreochromis niloticus is the most ecologically and economically important fish in tropical and sub-tropical aquatic systems. Recently, due to sever anthropogenic stressors, hydrological variations and infestations of invasive alien species in Ethiopian water bodies, fish community structure and ecosystem of Lake Tana is changing alarmingly. So far, there is paucity of information on the morphometric relations and diet composition of O. niloticus in Lake Tana, gulf of Gorgora. A total of 309 fish samples were collected and their total length (TL), standard length (SL) and total weight (TW) were measured to determine morphometric relations; and gut contents were examined to identify most important food item in the diet of the fish. Results indicated that, the relation between TL and SL was significant (p < 0.001) and linear (SL = 0.942TL-2.41) while the relation between TL and TW was curvilinear (TW = 0.014 TL^2.8) indicating allometric growth. Among the total guts scrutinized, 53 (17.3%) of them were empty and the remaining 256 (82.7%) were non-empty. Phytoplankton constituted the largest bulk and occurred in 77% of the guts examined and volumetrically accounted 44.3%. Detritus and zooplankton had an intermediate importance by occurring 60.2% and 63.3% of all guts scrutinized and constituted about 25.6% and 15.5% of the total volume respectively. Contributions of macrophytes, insects, nematodes and unidentified food items were relatively low in their importance. Ontogenetic dietary shift was observed in the diet indicating an omnivorous feeding habit of the adult fish.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.5
• /
• pp.494-502
• /
• 2016

A 1-dimensional heterogeneous reactor model with the gas-solid interfacial phase gradients was developed for the simulation of the packed bed reactor where the exothermic reversible water gas shift reaction for the natural gas steam reformed gas was proceeding in adiabatic mode. Experimental results obtained over the WGS catalyst, C18-HA, were best simulated when the frequency factor of the reaction rate constant was adjusted to a half the value reported over another WGS catalyst, EX-2248, having the same kinds of active components as the C18-HA. For the reactor of the inside diameter 158.4 mm and the bed length 650 mm, the optimum feeding temperature of the reformed gas was simulated to be $194^{\circ}C$, giving the lowest CO content in the product gas by 1.68 mol% on the basis of dried gas. For reactors more extended in the bed length, the possible lowest CO content in the product gas with the optimum feeding temperature of the reformed gas were suggested.