• The Research Journal of the Costume Culture
• /
• v.6 no.3
• /
• pp.201-216
• /
• 1998

This study is aimed at exploring a reasonable and reliable method of measuring pre-school children's somatotypes and there by, data basing the information obtained and classifying their somatotypes, at providing useful data which can be utilized for the design of their dress forms and enhancing the fitness of their apparels. to this end, 330 pre-school children living in the capital area and aged fro m4 to 6 were sampled to be subject to the measurement of their somatotypes. The results of this study can be summarized as follows; 1. As the pre-school children grow, the scales indicating their vertical growth including height could well be measured differently, but those scales indicating their lateral somatotypes which reflect their postural changes did not show among age groups. in other words, male kids were higher in the scales including height than female kids, while there were not differences between sexes in most scales indicating their lateral somatotypes. 2. The elements comprising the somatotypes were the size of body skeleton, the thickness of body mass, the posture and shape of body mass, the lateral under-neck shape, the extrusion of belly, the length between front and the back shoulder, the shape of lower belly, the shape of upper hip, the shape of lower hip and the slope of shoulders. Among them, the first two elements accounted for 64.8% of the total distribution, which means that these two elements explain the body-mass somatotypes of kid's most effectively. 3. The sample kids were divided into two types for classification of their somatotypes. As a result, it was found that the elements determining their somatotypes most influentially are, unlike adults' case the size of body skeleton rather than posture or lateral body shape. The type I showed less dimensions in most scales than type II, while their shoulder were les developed,. The type I was found distributed much in 4-year-old female kids. The type II showing more development in each element was found distributed much in 6-year-old male kids.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.227-232
• /
• 1988

A kinetic study was made to determine the mechanism of the aquation of $cis-[Co(en)_2(NH_3)Cl]^{2+}\;in\;Hg^{2+}$ aqueous solution. The progress of reaction was followed UV/vis-spectrophotometrically by a measurement of the absorbance at a specific wave length (530nm) of $cis-[Co(en)_2(NH_3)Cl]^{2+}$ as a function of time. The experimental results have shown that the reaction rate is dependent upon the concentration of $Hg^{2+}$ that act as a catalyst. And it was found that the overall reaction proceed with second order, first order with respect to Co(III) complex and $Hg^{2+}$. Activation parameters, ${\Delta}H^{\neq}\;and\;{\Delta}S^{\neq}$, were obtained as 12.9 kcal/mol and -19.3 e.u., respectively. We have proposed a plausible reaction mechanism which is consistent with the observed rate equation.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.841-849
• /
• 2007

This study evaluated the effect of combined rainfall observation of using rain gauge and rain radar. The effect of combined observations is to be evaluated by considering the decrease of measurement error due to combined use of design orthogonal observation methods. As an example, this study evaluated the rain gauge network of the Keum river basin, and showed how the density of rain gauges could be decreased by combining the radar observation. This study applied the researches on sampling error by North and Nakamoto(1989), Yoo et al. (1996) and Yoo (1997), also the simple NFD model for representing the rainfall field. The model parameters were decided using the rainfall characteristics (correlation time and length) estimated using the data collected in the Keum River Basin by 28 rain gauges and the operation rule of radar was assumed arbitrarily. This study considered the rain gauge density criteria provided by WMO(1994) and the rain gauge density installed in the Keum river basin to decrease the rain gauge density under the condition of introducing the radar.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.154-159
• /
• 2016

A roll-bonding process was applied to fabricate an AA1050/AZ91/AA1050 laminate complex sheet. Two AA1050 and one AZ91 magnesium sheets of 2 mm thickness, 30 mm width and 200 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 2 mm in thickness by conventional rolling. The rolling was performed at 623K without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 15.9 m/min. The AA1050/AZ91/AA1050 laminate complex sheet fabricated by roll bonding was then annealed at 373~573K for 0.5h. The microstructure of the complex sheets was revealed by electron back scatter diffraction (EBSD) measurement; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the complex sheet was found to increase by 11 % and the tensile elongation decreased by 7%, compared to those values of the starting material. In addition, the hardness of the AZ91 Mg region was slightly higher than those of the AA1050 regions. Both AA1050 and AZ91 showed a typical deformation structure in which the grains were elongated in the rolling direction; however, the mis-orientation distribution of grain boundaries varied greatly between the two materials.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.5
• /
• pp.27-36
• /
• 2016

This paper presents the investigation of the major influence factors on the degree of soil plugging for open-ended piles based on the Coupled Eulerian-Lagrangian (CEL) numerical technique. The main objective of this study was to investigate the effect of soil plugging on the response of piles in various conditions. Through comparison of the results of field load tests, the CEL methodology was found to be in good agreement with the general trend observed by in situ measurement. Additionally, the parametric studies were performed by controlling the soil conditions, soil elastic moduli, end-bearing conditions and multi layers. It was found that the degree of soil plugging for sand layers was greater than that of clay layers. Also, the degree of soil plugging increased with an increase in both the soil stiffness and length of pile embedded in the bearing layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.620-625
• /
• 2003

The coplanar waveguide bandpass filter using folded-line stepped-impedance resonators(SIRs) is proposed. The folded-line SIR has about λ/8 length using the short-circuited end on coplanar waveguide. It make that the bandpass filter has the half size in comparison with general λ/4 SIR filter. In this paper, we derive the equivalent circuit and design the bandpass filter by using that. We design and fabricate the bandpass filter which has 5 GHz center frequency and 3 % fractional bandwidth. The measurement results fur 4-pole folded SIR bandpass filter agreed well with full-wave simulation and equivalent circuit results. The fabricated bandpass filter has a good spurious characteristic, which the harmonic frequency appeared at 2.5f$\_$0/). The proposed folded-line SIR bandpass filter are applicable for MMIC and High-Tc superconducting filters. bandwidth.

• The Korean Journal of Elementary Counseling
• /
• v.4 no.1
• /
• pp.123-150
• /
• 2005

The purpose of this study was to examine the effects of self-regulated learning program on the underachiever's academic achievement and academic self-concept. To achieve the purpose of study the research hypotheses were as follows : Hypothesis 1 : There will be significant differences in the improvement of academic achievement between the experimental group and the control group. Hypothesis 2 : There will be significant differences in the improvement of academic self-concept between the experimental group and the control group. To verify these hypotheses, 32 underachievers were selected from sixth grade students of 'D' elementary school located in Seoul. 16 students were allocated to the experimental group and 16 students were allocated to the control group. The experimental group trained with self-regulated learning program for 10 times(The length of each section was 60 minutes). The self-regulated learning program in this study was based on program by Kim. Yong-Soo(1998), The measurement instruments of the study were mathematics achievement test paper and academic self-concept test. To find out the difference, Pretest-posttest control design was used. Mean and standard deviations obtained from these tests were analysed with t-test. The major findings obtained through this study are as follows : First, self-regulated learning program was effective in improvement of academic achievement (p<.05). Second, self-regulated learning Program was not effective in improvement of academic self-concept. However, the experimental group showed significant improvement(p<.01) at academic self-concept and sub academic self-concepts (ability, achievement) in the data of pre-post test. it can be suggested that this program had positive influence on underachievers. Although it has some limitations, self-regulated learning program is effective to academic achievement and academic self-concept of underachievers, even though not significant, it has a positive t.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.503-510
• /
• 2007

This paper proposes the design scheme of internal triple band antenna intended for using in GSM900, DCS1800, and PCS1900 bands. The suggested folding metal plates of the two branches are mounted on a dielectric coated ground plane for size miniaturization and durability. Return losses are overlapped when length of metal branches are controlled. This is important technique for wide band operation. For the suggested antenna geometry its return loss was calculated by HFSS 9 simulator, and was shown to be -10 [dB] less within the required band. Also, gain and radiation pattern of antenna were measured using far field measurement system in an anechoic chamber. The measured peak gain is more than 3.0 [dBi], and the average gain is over -1.0 [dBi] for the triple band, which is regarded as satisfactory for the internal antenna application. Also, the radiation pattern for two frequencies shows a similar shape each other within the required band.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.4
• /
• pp.49-53
• /
• 1999

In this study, the characteristics of the structure of buried type capacitor for RF multi- chip-module are investigated. We developed many kinds of structures to minimize the space of capacitor in module and the value of parastic series inductance without any loss in capacitance, and in this procedure the effect of vias especially position, size, number length are analyzed and optimized. This characteristics of structures are checked through HFSS(high frequency structure simulator) of HP, and the value of parastic series inductance is calculated by equivalent circuit analysis. And ensuing the result of simulation, we made buried type capacitors using LTCC (low temperature cofired ceramic) material. In measurement of this sample, we found out the effective and precise method can be applied to buried type and characteristics of vias and striplines added for measuring are quantified.

• Journal of Navigation and Port Research
• /
• v.26 no.2
• /
• pp.235-243
• /
• 2002

Theoretical analysis have been performed to design the high power semiconductor laser for an optical sensor at 1.55${\mu}{\textrm}{m}$ wavelength range which is the lowest loss wavelength in optical fiber. The materials of active region and SCH were $Ln_{1-x}Ga_xAs_yP_{1-y}$. In order to use the light source of optical sensors, it has to satisfy wide spectral width and short coherence length. Therefore, in order to suppress lasing oscillation, we proposed laterally tilted PBH type with a window region. Also, tapered stripe structure was applied for high coupling efficiency into a single mode fiber. From these analyses, the devices of laterally tilted angled and bending structure were fabricated and their characteristics were measured. In the results of the measurement, the fabricated devices have sufficient output power and wide FWHM to apply to the light source of optical fiber sensors.