• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.106-121
• /
• 2008

교통 정보에 있어 위치 인식 시스템은 차량 관리, 교통정보 제공을 위한 기초 기반 기술로 현재 GPS시스템을 기반으로 널리 제공되고 있지만 낮은 정확도와 통신 가시거리 확보로 인한 통신 음영지역이 발생하는 단점을 갖고 있다. 본 논문에서는 무선 RF만으로 정밀한 위치 인식이 가능한 IEEE 802.15.4a의 ISM Band를 사용하는 CSS(Chirp Spread Spectrum)방식을 기반으로 하여 주차장 및 터널 등의 음영지역에서 위치를 인식할 수 있는 다중 위치 인식시스템의 에너지 효율적이고 데이터 중심적인 프로토콜을 제안하고 설계하였다. 측정결과, 15 cm 미만의 오차 범위를 갖으며, 5 % 미만의 데이터 오류율을 갖는 네트워크를 구성할 수 있었으며, 저전력 알고리즘을 적용하여 Tag Node의 수명을 3 V, 1500 mAh 용량의 배터리에서 동작 주기를 적용하여 0.7 일의 수명에서 13.5 일의 수명을 갖는 다중 위치 인식 시스템을 구현 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.115-121
• /
• 2008

A core engine for pre-cooled turbojet engines is designed and its component performances are examined both by CFD analyses and experiments. The engine is designed for a flight demonstration of precooled turbojet engine cycle. The engine uses gas hydrogen as fuel. The external boundary including measurement devices is set within $23cm{\times}23cm$ of rectangular cross section, in order to install the engine downstream of the air intake. The rotation speed is 80000 rpm at design point. Mixed flow compressor is selected to attain high pressure ratio and small diameter by single stage. Reverse type main combustor is selected to reduce the engine diameter and the rotating shaft length. The temperature at main combustor is determined by the temperature limit of non-cooled turbine. High loading turbine is designed to attain high pressure ratio by single stage. The firing test of the core engine is conducted using components of small pre-cooled turbojet engine. Gas hydrogen is injected into the main burner and hot gas is generated to drive the turbine. Air flow rate of the compressor can be modulated by a variable geometry exhaust nozzle, which is connected downstream of the core engine. As a result, 75% rotation speed is attained without hazardous vibration and heat damage. Aerodynamic performances of both compressor and turbine are obtained and evaluated independently.

• The Journal of Korean Physical Therapy
• /
• 제33권4호
• /
• pp.202-209
• /
• 2021

Purpose: This study examined whether various lower extremity exercises using a Swiss ball in the standing position could improve balance, muscle strength, gait, and fall efficacy in stroke patients. Methods: Twenty-one stroke patients were randomly divided into three groups, each with seven participants. For four weeks, experimental group 1 performed various lower extremity exercises using a Swiss ball, while experimental group 2 executed the same exercises without a Swiss ball, and the control group underwent general physical therapy. The subjects' knee extensor muscle strength, balance, gait, and fall efficacy were evaluated before and after the intervention using portable muscle strength measurement, the Berg Balance Scale (BBS), G-walk, and the Korean Falls Efficacy Scale (K-FES). Results: Knee extensor strength increased significantly in all three groups after the intervention; in particular, a significant increase was seen in experimental groups 1 and 2 compared to the control group. Moreover, all three groups had significantly better BBS scores and higher cadence after the intervention; notably, experimental group 1 had better scores and increased cadence than the control group. Additionally, gait speed was significantly increased in the experimental group 1 than in the control group. The step length of the non-affected leg was also significantly higher in the same group. The K-FES score improved significantly in all three groups, but there was no significant difference between the groups. Conclusion: This study suggests that lower extremity exercises with or without a Swiss ball could be effective interventions to improve muscle strength, balance, gait, and fall efficacy in stroke patients.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.183-188
• /
• 2021

Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

• 한국의류산업학회지
• /
• 제21권2호
• /
• pp.220-230
• /
• 2019

The Fourth Industrial Revolution has increased studies on observing the cross section by overlapping the clothing worn using 3D human body data. However, there is a lack of studies on the effect of pressure clothing that contracts the shape of the human body. Therefore, this study objectively evaluated the shaping functionality of body shapers using 3D scan and 3D data. Two types of commercial body shapers were selected for this study. The nude body and body wearing body shapers were then scanned. A 3D program evaluated the shaping functionality by overlapping the nude state with the body wearing body shaper A and B respectively. As a result, it was found that the effect of body shapers could be adequately observed according to body parts. The smaller body shaper was shown to have superior shaping capability with the abdomen more affected. Analysis of the horizontal cross section indicated that the waist circumference decreased by 6 cm when wearing body shaper A and decreased by 12cm when wearing body shaper B. The volume of the waist part decreased by 8.6% when wearing body shaper A and by 20.4% when wearing body shaper B. Therefore, it is more effective to compare the objective shaping functionality by body parts using the overlapped 3D scanned data rather than using exterior evaluation or length measurement when wearing clothing that contracts the body shape.

• 한국융합학회논문지
• /
• 제10권6호
• /
• pp.365-379
• /
• 2019

본 연구의 목적은 환자-가족중심 의료서비스의 특성과 성과를 체계적 문헌고찰 방법으로 분석하여 서비스의 융합적 유효성을 평가하는 것이다. 15개 전자 데이터 베이스에서 환자-가족중심 의료서비스의 성과를 연구한 RCT 문헌 검색, 선정, 자료 추출, 질 평가를 시행하였다. 선정된 21편 문헌의 환자-가족중심 의료서비스의 공통적 특성은 정보제공과 교육, 의사소통, 가족 및 친구의 참여였다. 환자-가족중심 의료서비스의 성과 측정 변수는 89개였고, 환자 성과는 사망률, 재원기간 등으로 측정되었으며 18편의 문헌에서 환자 성과가 유의하게 향상되었다. 본 연구는 환자-가족중심 의료서비스의 성과를 통합적으로 제시하여 서비스의 유효성을 증명함으로써 의료기관과 지역사회의 지속적인 의료질 향상 활동을 위한 당위성을 제공하였으며 향후 의료의 질 향상과 환자안전을 위한 환자-가족중심 의료서비스의 융합적 적용과 이에 대한 근거기반 연구가 필요함을 제언한다.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.203-212
• /
• 2018

Quality requirements of manufactured products or parts are given in the form of specification limits on the quality characteristics of individual units. If a product is to meet the customer's fitness for use criteria, it should be produced by a process which is stable or repeatable. In other words, it must be capable of operating with little variability around the target value or nominal value of the product's quality characteristic. In order to maintain and improve product quality, we need to apply statistical process control techniques such as histogram, check sheet, Pareto chart, cause and effect diagram, or control charts. Among those techniques, the most important one is control charting. The cumulative sum (CUSUM) control charts have been used in statistical process control (SPC) in industries for monitoring process shifts and supporting online measurement. The objective of this research is to apply Taguchi's quality loss function concept to cost based CUSUM control chart design. In this study, a modified quality loss function was developed to reflect quality loss situation where general quadratic loss curve is not appropriate. This research also provided a methodology for the design of CUSUM charts using Taguchi quality loss function concept based on the minimum cost per hour criterion. The new model differs from previous models in that the model assumes that quality loss is incurred even in the incontrol period. This model was compared with other cost based CUSUM models by Wu and Goel, According to numerical sensitivity analysis, the proposed model results in longer average run length in in-control period compared to the other two models.

• Physical Therapy Rehabilitation Science
• /
• 제7권4호
• /
• pp.179-185
• /
• 2018

Objective: The purpose of this study was to analyze and compare vertical ground reaction forces during sit to stand (STS) and gait between female elderly and young individuals using the Wii Balance Board (WBB). Design: Cross-sectional study. Methods: Fifty-one female elderly people (age: $75.18{\pm}4.60years$), and 13 young people (age: $29.85{\pm}3.69years$) performed the five times STS test and gait respectively on the WBB. We analyzed time (s), vertical peak (%), integral summation (Int_SUM, %), and counter variables (%) in STS and 1st peak (body weight, BW%), 2nd peak (BW%), peak minimum (BW%), time (second), center of pressure (COP) path length (mm), and Int_SUM (BW%) in gait. The independent t-test was used to assess for differences in STS, gait ability, and general characteristics between the female elderly group and young adults group. With the first and last trials excluded, the mean value was obtained from the middle three of the five trials. Results: During STS, Int_SUM and time of young adults were significantly less than of the female elderly subjects. There were no significant differences in peak and counter variables. In gait, all variables (1st peak, 2nd peak, min, time, COP_path, and Int_SUM) showed significant differences between groups (p<0.05). This study demonstrated that the validity of vertical ground reaction forces occurring during STS and gait was significant in female elderly and young adults. Conclusions: Based on the measurement of vertical ground reaction forces in STS and gait using the WBB, it is possible to clinically improve the quality of geriatric physical therapy. Further studies are necessary to examine concurrent validity of elderly patients who have undergone total hip or knee replacement.

• PNF and Movement
• /
• 제19권1호
• /
• pp.127-135
• /
• 2021

Purpose: The purpose of this study was to determine the effect of the side-bridge exercise on the thicknesses of the external and internal obliques, the transverse abdominis, and the erector spinae, which are some of the trunk muscles of healthy adult males and females. Methods: There were 30 subjects divided into two groups with 15 subjects in the modified side-bridge exercise group and 15 subjects in the bridge exercise group. The changes in each variable were analyzed before the exercise, after three weeks, and after six weeks of exercise using a two-way repeated analysis of variance. The significance level was set at 0.05. When there was any interaction between the time of measurement and each group, a paired t-test was conducted to find the difference within groups and an independent-sample t-test was conducted to find the difference between groups. The significance level for both tests was set at 0.01. Results: There was a significant difference in the external and internal obliques and the erector spinae according to changes over time and the interactions between the time and groups (p < 0.05). However, there was a significant difference in the transverse abdominis only according to the interaction between the length of times (p < 0.05). Conclusion: The study results indicated that the modified side-bridge exercise significantly increased the thickness of the external and internal obliques and the erector spinae. This suggests the usability of the exercise in lumbar stabilization exercises in future studies and clinical fields.