• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.2
• /
• pp.123-128
• /
• 2005

This paper presents an analysis of the permanent magnet overhang effect for the permanent magnetic actuator. Generally, the overhang is often used to increase the force density in permanent magnet machineries. The overhang is particularly profitable in reducing the volume after increasing the force density per volume when using the overhang effect of the permanent magnet. Therefore, the 3D Equivalent Magnetic Circuit Network Method (3D EMCN) has been used in this paper. According to the plunger position, the flux distribution per overhang length and the holding force are quantitatively compared. Furthermore, an appropriate length of the overhang has been proposed. To confirm the accuracy of the analysis method, the results of 2D FEM and 3D FEM are compared for the basic model.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.85-90
• /
• 2011

The effects of $CO_2$ ppm in atmosphere on the values of the total emissivity are studied. The predictions by several methods are compared. The predicted value differences between modified Kondratyev model and Hottel model are the smallest with in the range of values tested. The $CO_2$ ppm is varied from 300 ppm to 600 ppm. By Wide Band model, the total emissivity increases with increasing density-path length product rather linearly up to 0.1 g/$cm^2$. For given $CO_2$ ppm, the total emissivity increases as the air thickness increases. The same is true for both temperature and pressure increase. The temperature range tested is 220 to 300 K. Around 260K, the total emissivity is less sensitive with increasing temperature than with decreasing temperature. The pressure is varied from 0.94 to 1.06 atm. The percentage change of total emissivity with pressure change from 1atm is at most the percentage change of the pressure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.869-874
• /
• 1998

A feeding trial was carried out to investigate the optimum density of juvenile abalone (Haliotis discus hannai) fed the formulated diet or macroalgae ( Undaria). Abalone with initial average shell length of 8.41 mm were stocked into three replicate tanks at four different densities of 1430, 2860, 4290, and 5720 individual/$m^2$ for 15 weeks. The formulated diet produced higher body weight and shell growth, soft body weight and survival rate than Undaria in abalone. Abalone fed the formulated diet have significantly (P<0,05) higher lipid and ash, and lower moisture and protein in soft body. Higher density resulted in lower growth and survival (P<0.05). Whereas shell growth, survival rate and weight gain were not significantly (P>0.05) different within the abalone stocked at stocking densities of 1430 and 2860 individual/$m^2$ in each diet group. Body composition of abalone was not affected by increasing density. These study indicate that the number of abalone (shell length ranges of between 8 mm and 17 mm) below 2860 individual/$m^2$ were predicted to effective density in the indoor tank culture system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.659-663
• /
• 2015

In the present study, electroplastic tensile behaviors of aluminum 5052-H32 alloy specimens with different gage dimensions are investigated under a constant electric energy density (electric energy per unit volume). The experimental results show that equivalent electric energy densities induce nearly identical electroplastic behaviors even with different gage dimensions (length, width, or volume). Additionally, the experimental results demonstrate that the electroplastic behavior of the selected aluminum alloy is best described by the electric energy density, which is a function of current density and current duration, rather than individual current density or current duration. The results of the present study suggest that the electric energy density may replace current density and current duration as a design parameter in electrically assisted forming processes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.1
• /
• pp.69-81
• /
• 2010

The purpose of this study is to analyze the growth characteristics of native Kentucky bluegrass (Poa pratensis L.) collected in Korea. Out of Kentucky bluegrasses collected in 2000 and 2008, eight ecotypes ("Pyengchang," "Gongju," "Inje," "Donggang," "Hwasun," "Pureundle," "Cheongsong," and "Geumsan") were planted in experimental fields and pots on May 11, 2008 and May 3, 2009, respectively, for analyzing their growth characteristics. Data such as visual quality (1-9), visual density (1-9), visual color (1-9), plant height, leaf length and leaf width were analyzed. The visual quality of "Pyengchang," "Inje" and "Gongju" were enhanced compared to the rest native ecotypes of Kentucky bluegrass. "Pyengchang" showed the best visual density while "Gongju" and "Inje" showed almost evenly favorable density. However, "Pureundle," "Cheongsong," and "Geumsan" represented loose density due to the damage from the summer climate of high temperature and humidity in 2009. As for visual color, "Pyengchang" was also ranked first, maintaining high values of at least 7.6 even in the summer climate of high temperature and humidity. "Donggang" showed good color immediately after planting in the experimental field in 2008, however, undesirable color due to the damage from the summer climate of high temperature and humidity in 2009.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.732-738
• /
• 2004

In this paper, we constructed 13 turns pancake coil and solenoid coil with HTS tape and measured AC losses of the pancake coil. The critical current of the pancake coil and the solenoid coil were 80A and 109A, respectively. To compare measured AC losses of the two coils, we carried out numerical analysis using 2-D FEM program for manufactured coils. This paper presents current density distribution, flux density distribution and AC losses of the pancake coil and the solenoid. As a result, we obtained that current density distribution was closely related to the orientation of magnetic field and distribution of AC losses were also closely related to the perpendicular component of flux density distribution in coil. The calculated AC losses of the two coils showed good agreement with measured AC losses and AC losses of the pancake coil was about 9 times bigger than that of the solenoid coil under the same turns and length.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.253-260
• /
• 2021

The purpose of this study is to measure of growth and chlorophyl in barley exposed by X-ray. Barley seed was soaked 24h duration in water, then was classified into two group; pre-seed germination group (Pre-G) or post-seed germination group (Post-G). Also, divided as control subgroup and experimental subgroup(10Gy, 20Gy, 30Gy) in each group. Experimental subgroups were exposed by X-ray using linear accelerator (Clinac IS, VERIAN, USA). Expose condition was 6 MV X-ray, SSD 100 cm, 18×10 cm, 600 MU/min. Length was measured every day for 10 days and 10th day for weight. Chlorophyl was analyzed using spectrophotometer(uv-1800, shimadzu, japan) in l0th day. Data analysis was performed using SPSS ver 22.0(Chicago, IL, USA), ANOVA test (Dunnett_T3) between control subgroup and experimental subgroup in group and Independent T-test between Pre-G and Post-G in subgroup. In Pre-G, length of barley was significantly difference between control and 30Gy in 4th day (4.3 vs. 1.5, p= 0.011). Length of 30Gy was statistical difference with control(10th day; 14.4 vs. 6.3, p < 0.01), and was not in 10Gy or 20Gy in all day. In experimental subgroup, length was shorter as increasing radiation dose. In Post-G, length of barley was not difference statistically between control and experimental subgroup in first day, but more difference between two subgroup with increasing duration after exposing. Length of experimental subgroup was shorter significantly compared with control in 10th day, and no significant difference between experimental subgroup. Density of chlorophyl was increasing with increasing radiation dose in Pre-G and Post-G. Chlorophyl density of control was lower than 30Gy; 0.26ppm in Pre-G, 0.29ppm in Post-G). Growth and chlorophyl of barley was effected by X-ray. It is expected to be used as basic data for future radiobiological research.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.34.2-34.2
• /
• 2019

Several observational results show a tighter pitch angle at wavelengths of optical and near-infrared than those that are associated with star formation, which is in agreement with the prediction of the density wave theory. In my recent numerical studies, the dependence of the shock positions relative to the potential minima is due to the tendency that stronger shocks form farther downstream. This causes a systematic variation of the perpendicular Mach number, with radius and makes the pitch angle of the gaseous arms smaller than that of the stellar arms, which supports the prediction of the density-wave theory, independently. However, some observations still give controversial results which show similar pitch angles at wavelengths, and there is no statistical study comparing observations and numerical models directly. By analyzing optical image of disk galaxies in the Carnegie-Irvine Galaxy Survey (CGS), I measured the physical values of stellar and gaseous arms such as their strength, length, and pitch angles. For direct comparison with numerical results, I analyzed more than 30 additional numerical models with varying the initial parameters in model galaxies. In this talk, I will present results both of observational and numerical samples and discuss the physical properties of spiral structures based on the density-wave theory.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.45-53
• /
• 2000

This study was carried out to determine the suitability of 3 months old bamboo species of Phyllostachys bambusoides S. et Z., Phyllostachys Pubescens Mazel and Phyllostachys nigra var henonis Stapf as raw materials for the manufacture of strandboard. Total of 108 strandboards were made using urea-formaldehyde resin content level of 12% and one percent of liquid wax emulsion. The strandboard consisted of three layers the top and the bottom layer of which were oriented to the same direction and weighted 25% of the strandboard each. The middle core layer weighed 50% of the board and was perpendicular to the outer top and bottom layers. Analysis was performed to determine the effect of strand lengths and Uowing years of 3 months, 2 years and 3 years on strandboard properties. The physical and mechanical properties of bamboo species and boards were measured and compared to the standard requirements of strandboards. The results are as follows; 1. The more the growing years the higher the density of bamboo. Top part of bamboo indicated higher density value than that of bottom part. 2. Bamboo showed higher static bending strength compared to the main wood species. Longer growing years of bamboo generally inclosed the static tending strength out there were no statistical significancies for Phyllostachys bmbusoides S. et Z. and Phyllostachys pubescens Mazel. 3. Strand length indicated no difference on density and moisture content of strandboard. 5 cm of strand length gave the best static bending strength and internal bonding strength. Bamboo strandboard exhibited lesser extents of thickness swelling than that of CSA standard. 4. 3 months old bamboo gave higher static bending strength of strandboard than those of 2 years and 3 years old bamboo. In case of Phyllostachys nigra var henonis Stapf, 3 months old bamboo indicated higher internal bonding strength than those of 2 years and 3years old bamboo. but in Phyllostachys bambusoides S. et Z., Phyllostachys pubescens Mazel, there were no difference among growing years. Growing years showed no different physical properties of bamboo strandboard.