• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.3
• /
• pp.177-186
• /
• 1970

The spawning of the abalone, Haliotis discus hannai, was induced In October 1969 by air ex-position for about 30 minutes. At temperatures of from 14.0 to $18.8^{\circ}C$, the youngest trochophore stage was reached within 22 hours after the egg was laid. The trochophore was transformed into the veliger stage within 34 hours after fertilization. For $7\~9$ days after oviposition the veliger floated in sea water and then settled to the bottom. The peristomal shell was secreted along the outer lip of the aperture of the larval shell, and the first respiratory pore appears at about 110 days after fertilization. The shell attained a length of 0.40 mm in 15 days, 1.39 mm in 49 days, 2.14 mm in 110 days, 5.20 mm in 170 days and 10.00 mm in 228 days respectively. Monthly growth rate of the shell length is expressed by the following equation :$L=0.9981\;e^{0.18659M}$ where L is shell length and M is time in month. The density of floating larvae in the culture tank was about 10 larvae per 100 co. The number of larvae attached to a polyethylene collector ($30\times20\;cm$) ranged from 10 to 600. Mortality of the settled larvae on the polyethylene collector was about $87.0\%$ during 170 days following settlement. The culture of Nauicula sp. was made with rough polyethylene collectors hung at three different depths, namely 5 cm, 45 cm and 85 cm. At each depth the highest cell concentration appeared after $15\~17$ days, and the numbers of cells are shown as follows: $$5\;cm\;34.3\times10^4\;Cells/cm^2$$ $$45\;cm\;27.2\times10^4\;Cells/cm^2$$ $$85\;cm\;26.3\times10^4\;Cells/cm^2$$ At temperatures of from 13.0 to $14.3^{\circ}C$, the distance travelled by the larvae (3.0 mm In shell length) averaged 11.36 mm for a Period of 30 days. Their locomation was relatively active between 6 p.m. and 9 p.m., and $52.2\%$ of them moved during this period. When the larvae (2.0 mm in shell length) were kept in water at $0\;to\;\~1.8^{\circ}C$, they moved 1.15cm between 4 p.m. and 8 p.m. and 0.10 cm between midnight and 8 a.m. The relationships between shell length and body weight of the abalone sampled from three different localities are shown as follows: Dolsan-do $W=0.2479\;L^{2.5721}$ Huksan-do $W=0.1001\;L^{3.1021}$ Pohang $W=0.9632\;L^{2.0611}$

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.217-227
• /
• 2019

The purpose of this study was to investigate the initial growth, burrowing depth, and relative growth of mud shrimps (Upogebia major and Austinogebia wuhsienweni), living in damaged high density tidal flat shellfish farms form 2008 in the Western coast of Korea. By August, young mud shrimps (Upogebia major), which had settled down on the tidal flats in early May, grew to more than 10 mm in carapace length (CL). At the end of the first year, their CL and total length (TL) increased to 14.21 mm and 42.28 mm, respectively. The inhabiting depth of the young mud shrimps (Upogebia major) increased rapidly up to about 6 months after stocking (5 cm in July, 12.5 cm in September, and 28 cm in November, respectively). The inhabiting depth of adult mud shrimps in their burrows was about 10-93 cm during the year. As results, the analysis of the relative growth between the carapace length (CL) - the total length (TL) and the CL - total wet weight (TWW), the total wet weight of mud shrimps at Boryeong Saho (inner part of the Cheonsu-bay) was estimated to be 1.2-4 g heavier than those of Boryeong Jugyo (Outer part of the Cheonsu-bay) tidal flat. The young mud shrimps primarily grew from April to October. It is therefore crucial to observe whether the settlement of young mud shrimps on tidal shellfish farms from May to June to minimize the damage of shellfish farms by newly stocked young mud shrimps. In addition, it is recommended that young mud shrimps grown in fisheries be harvested before they dig deep into the sediment until early December.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.172-180
• /
• 2007

A new diagnostics of plasma electron temperature and plasma density is introduced with the observation of the light emission along the tube of external electrode fluorescent lamps. With two different methods operating an external electrode fluorescent lamp of outer diameter 4.0 mm and length 860 mm for the back-light source of 37-inch LCD-TVs, the lighting modes and the plasma properties are investigated. In the center balance operation, the light-emission propagates simultaneously from both sides of the high voltage electrodes to the center of the lamp, while in conventional operation the light-emission propagates from the one end of a high voltage to the other ground electrode. In the operation value of luminance $10,000{\sim}15,000cd/m^2$, the electron plasma thermal energy $(kT_e)$ is about $1.3{\sim}2.7eV$ with the electron density $(n_e)$ is about $(1.6{\sim}3.6){\times}10^{16}m^{-3}$.

• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.25-34
• /
• 2012

Noxious gases with malodorous substance concentrations in each stages of pig buildings were determined at a typical 400sow-scale farm to improve piggery environment. Using IAQ-300 and pDR-1000AN, continuous records for the concentration of $NH_3$, CO, $CO_2$, $NO_2$, $SO_2$, $H_2S$, $O_2$, and along with temperature, humidity, dust concentrates from individual pig pens were collected to analyze every 6 hours' condition of indoor environment for 24 hours' period. In most pig houses, the air quality at noon was good, while at night (00:00~06:00), air composition became noxious in all buildings. The order of buildings' air quality for 24 hrs was pregnant > farrowing > nursery > growing > finishing. The cause of air quality differences was presumed to be the differences of stocking density, defecating amount and the length of exposure time of slurry in indoors. In conclusion, well-designed building structure, proper control of stocking density, quick removal of excreta from pig pens and continuous ventilation are prerequisites to improve pig housing environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3548-3556
• /
• 2015

In order to fulfill the needs of reliable and economically feasible foundation, engineers should consider not only the working load that can endure extreme conditions but also apprehending precise behavior of continuous dynamic load while designing the foundation of offshore wind power generators. To actualize the foundation, a model pile was made in miniature. Also, calibration chamber was made and a 500mm height of sand-bed was made to perform "static lateral load experiment" and "repetitive loading experiment", total of two Lateral load tests. As a result, in Static Lateral load test, the bigger length/diameter of model pile led an increase in load displacement. However, when performing "Cyclic Lateral load test", the increase in number of under loading led the decrease in horizontal displacement from each repeated lateral load. While performing Static Lateral load test and repeated loading experiment, we could observe the decreasing in the rate of ultimate lateral load capacity increase of the pile. Also, it turned out that the higher relative density of the ground, the lower ultimate lateral load capacity by repeated horizontal loading.

• Journal of Mushroom
• /
• v.18 no.2
• /
• pp.174-177
• /
• 2020

This study sought to determine the optimal mixing ratio of Korean cultivated Artemisia annua for production of functional oyster mushrooms. After 23 days of cultivation, mycelial growth was 12.7 cm in medium supplemented with 5% A. annua and 12.5 cm in control. Mycelial growth progressively slowed with the addition of A. annua, with barely any growth (2.1 cm) in the presence of 70% A. annua. Mycelial density was high density without significant difference between treatments. The pileus diameter was greater in the presence of A. annua than in the control, but the pileus thickness was only slightly higher compared to the control. The stipes thickness was greatest for 15% A. annua, and the length of stipes was longest at 10% A. annua, but was lower than the value of the control. The L value of the fruiting zone was highest 10% firewood, and the L value of freshwater was highest at 5% A. annua. The fruiting body yield was highest to (122 g/850 ml) in medium supplemented with 5% A. annua but markedly decreased at higher levels of A. annua.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.1
• /
• pp.36-43
• /
• 1978

Ears collected from 500 regions were phenotypically observed for their ear and kernel characters. Characters studied included ear shape, kernel color, kernel density, ear row number, starch quality, pop corn and waxy corn, ear length, ear diameter, kernel length, kernel width, kernel weight, ear weight, and 100 kernel weight. The Korean local corn collected were mostly flint type and were very diverse in all the characters studied. The collected local corn would be very promising for providing good germplasm for corn breeding in the future.

• Progress in Medical Physics
• /
• v.7 no.1
• /
• pp.53-64
• /
• 1996

Purpose: The purposes of this paper are to develop a theoretical basis that the beam directions should be considered when the mechanical accuracy of teletherapy machine is evaluated by the star pattern test, to develop methods using asymmetric field in length to simulate beam direction for the case that beam direction does not appear on film. Method: In evaluating mechanical rotational accuracy of the gantry of teletherapy unit by the star pattern test, the direction of radiation beams was considered. A star pattern using some narrow beams was made. Density profiles at 10cm far from estimated gantry axis on the star pattern were measured using an optical densitometer. On each profile, one coordimate of a beam axis was determined. A pair of coordinates on a beam axis form an equation of the axis. Assume that a unit vector equation omitted is with same direction as radiation beam and a vector equation omitted is a vector directing to the beam axis from the estimated gantry axis. Then, a vector product equation omitted ${\times}$ equation omitted is an area vector of which the absolute value is equal to the distance from the estimated gantry axis to the beam axis. The coordinate of gantry axis was obtained by using least-square method for the area vectors relative to the average of whole area vectors. For the axis, the maximum of absolute value of area vectors would be an accuracy of the gantry rotation axis. For the evaluation of mechanical accuracies of collimator and couch axes for which beam direction could not be depicted on a star pattern test film, narrow beams asymmetric in field length was used to simulate beam direction. Result: For a star test pattern to evaluate the mechanical accuracy of rotational axes of a telectherapy machine, the result considering beam direction was different from that ignoring beam direction. For the evaluation of mechanical accuracies of collimator and couch axes by means of a star pattern test, narrow asymmetric beams could simulate beam direction. Conclusion: When a star pattern test is used to evaluate the mechanical accuracy of a teletherapy unit, beam direction must be considered or simulated, and quantitatively evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.145-150
• /
• 2019

The purpose of this study was to investigate farmers' field survey to improve animal welfare certification standards and to obtain basic data on the animal welfare level for certified farmers to develop evaluation methods of animal welfare level suitable for domestic farm environment. The subjects of the study were selected 10 animal welfare laying certified farmhouses. The farming certified farming facility survey collected breeding form, head, feed and drink space, breeding density, length and shape of perch. Animal welfare was assessed by the presence of sand bath, spawning, enrichment measures, free range, feathers pecking. The results of the study showed that most the certified animal welfare laying hens complied with the certification standards. All the farms were providing the nest box, but there were farms with more than 20% of the spawning rate. The perches were provided in sufficient length, but only three of ten farms were using rounded perches. Feather damage has been identified in most survey farms, which is likely to be due to feather damage caused by roosters producing both fertilized eggs. In this study, 10 farm households were surveyed. It was not possible to represent the whole certified farmhouse. Therefore, it should be analyzed thoroughly to evaluate the level of animal welfare.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.658-664
• /
• 2011

Rotifers of the genus Brachionus are commonly used as a live food for larval fish, and rotifers of different sizes are preferred according the mouth size of the fish. Rotifer species vary in size, and individual size can depend on the temperature and salinity of the rearing environment. We investigated the effects of temperature and salinity for two species, B. plicatilis (250-300 ${\mu}m$) and B. rotundiformis (100-220 ${\mu}m$). Two strains of B. plicatilis (CCUMP 36 and 48) and two strains of B. rotundiformis (CCUMP 51 and 56) were received from the Culture Collection of Useful Marine Plankton (CCUMP) at Pukyong National University and cultured with the green alga, Nannochloris oculata (KMMCC 16) from the Korea Marine Microalgal Culture Center (KMMCC). The growth and size of rotifers were examined at three water temperatures ($16^{\circ}C$, $24^{\circ}C$, $32^{\circ}C$) and four salinities (20 psu, 25 psu, 30 psu, 35 psu) under continuous light (40 ${\mu}molm^{-2}s^{-1}$). The maximum density and growth rate of B. rotundiformis were greater than those of B. plicatilis. The lorica length of B. plicatilis ranged from 215.4 to 269.7 ${\mu}m$ and from 154.9 to 206.6 ${\mu}m$ for B. rotundiformis, depending on strain, temperature and salinity. Rotifers were smaller when cultured at high temperatures, regardless of salinity. B. rotundiformis preferred higher salinity than B. plicatilis. The results demonstrated that the size of rotifers could be controlled to some extent by temperature and salinity.