• 제목/요약/키워드: length adaptation

검색결과 169건 처리시간 0.028초

무선 센서 네트워크에서 큐 관리 기반의 듀티 사이클 제어 (Queue Management-Based Duty Cycle Control in Wireless Sensor Networks)

  • 변희정;손수국
    • 제어로봇시스템학회논문지
    • /
    • 제17권12호
    • /
    • pp.1273-1277
    • /
    • 2011
  • This paper proposes a control-based approach for duty cycle adaptation in wireless sensor networks. The proposed method, QCon, controls duty cycle through queue management in order to achieve high performance under variable traffic rates. To minimize energy consumption while meeting delay requirement, we design a feedback controller, which adapts the sleeping time according to dynamically changing traffic by constraining the queue length at a predetermined value. Based on control theory, we analyze the adaptive behavior of QCon and derive conditions for system stability. Results from asymptotic analysis and simulations indicate that QCon outperforms existing scheduling protocol by achieving more energy savings while satisfying delay requirement.

무진동 크레인의 구현을 위한 여러가지 제어방식의 비교 연구 (Comparison Study of Various Control Schemes for the Anti-Swing Crane)

  • 윤지섭
    • 대한기계학회논문집
    • /
    • 제19권9호
    • /
    • pp.2399-2411
    • /
    • 1995
  • Crane operation for transporting heavy loads inherently causes swinging motion at the loads due to crane's acceleration or deceleration. This motion not only lowers the handling safety but also slows down the handling process. To complement such a problem, Korea Atomic Energy Research Institute(KAERI) has designed several anti-swing controllers using open loop and closed loop approaches. They are namely a pre-programmed feedback controller and a fuzzy controller. These controllers are implemented on a 1-ton crane system at KAERI and their control performances are compared. Test operations show that the new controllers are superior to that of conventional cranes in terms of robustness to the disturbances and adaptation capability to the change of rope length.

Breeding of Korean Ginseng (Panax ginseng C. A. Meyer)

  • Kwang-Tae Choi;Woo
    • 고려인삼학회:학술대회논문집
    • /
    • 고려인삼학회 1998년도 Advances in Ginseng Research - Proceedings of the 7th International Symposium on Ginseng -
    • /
    • pp.96-102
    • /
    • 1998
  • A lot of individual ginseng plants were selected in the farmer's fields to develop new ginseng varieties with desirable traits. Among them, a promising line has been developed through comparative cultivation of several lines selected with pure line separation of local raced. It was then designated as "KC (denotes Korean Ginseng)" and tested in the regional yield and adaptation trials for 10 years. KG lines grew vigorously after 4 years of age. Especially, KG 102 line arson운 them showed traits of multiple and short stems. As for the root characters, the length of taproot of KG 101 line was longer than that of local race, Jakyung-jong, or other lines ailed the root weight of KG 102 line waIn 15 % higher than that of local race. In general, KG 101, KG 103, KG 104, and Hwangsauk-jong had good root shape. Total amount of ginsenosides of ginseng taproot was the highest in KG 103 line than in local race and other lines. In these studies, we, elected three superior lines, KG 101, KG 102, and KG 103, having characteristic of good root shape, high yield, and large amount of ginsenoside, respectively.

  • PDF

다변풍속 적응형 Darrieus-Sauonius 초합 수직푹 풍력발전 시스템의 설계 (A design of vertical axis wind power generating system combined with Darrieus-Savonius for adaptation of variable wind speed)

  • 서영택;오철수
    • 대한전기학회논문지
    • /
    • 제45권2호
    • /
    • pp.185-192
    • /
    • 1996
  • This paper presents a design of vertical axis Darrieus wind turbine combine with Savonius for wind-power generating system to be adapted for variable wind speed. The wind turbine consists of two troposkien- and four Savonius-blades. Darrieus turbine is designed with diameter 9.4[m], chord length 380[mm], tip speed ratio 5. Savonius turbine is designed with diameter 1.8[m], height 2[m], tip speed ratio 0.95. The design of turbine is laid for the main data of rated wind speed 10[m/s], turbine speed 101.4[rpm]. The generating power is estimated to maximum power 20[kW], and this is converted to commercial power line by means of three phase synchronous generator-inverter system. Generating system is designed for operation on VSVF(variable speed variable frequency) condition and constant voltage system.

  • PDF

생활한복 저고리 디자인의 구성적 특성에 관한 연구 (A Study on the Clothing Constructional Characteristics of Contemporary Folk Jogori Design)

  • 천종숙
    • 한국의류학회지
    • /
    • 제22권6호
    • /
    • pp.691-698
    • /
    • 1998
  • This study investigated the clothing constructional characteristics of contemporary folk Jogori design retailed at the market. This study focussed on comparison of style variation between contemporary Jogori and traditional Jogori. The data were collected from five top contemporary folk dress makers's 997-1998 fall-winter collection. The results of this study were as following. 1) The traditional folk clothing constructional elements remained most among the con- temporary Jogori design were center back seam(Deung-Sol) and attached front bodice extensi on(Sup). Neckline shaping(Geet) and neckline binding(Dong-Jeong) were also observed frequently. 2) The most obvious changes from the traditional Jogori design were elimination of the ribbon fastener in front, adaptation of various neckline shaping used in the Yi dynasty, and lengthened garment length. 3) The western garment construction techniques applied to the contemporary Jogori design were use o( pocket and button closure. The center front extension was replaced with attached front bodice extension(Sup) for a few Jogori design.

  • PDF

A CFD study on the Supersonic Flow through a Dual Bell Nozzle

  • ;김희동
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.324-330
    • /
    • 2012
  • Dual bell nozzle is one of the most promising choices among the altitude adaptation nozzles. This facilitates having a forced, steady and symmetrical separation at lower altitudes and a controlled flow separation at the wall inflection point which prevents the generation of dangerous side loads. In order to ensure the attached flow in the second bell, a clear understanding of the flow transition is required. Hence the motivation of our study is to arrive at an optimum profile for the second bell, which allows a sudden and controlled transition. In this work, we designed the first bell using the conventional MoC and the second bell using an inverse MoC, imposing a pressure gradient constraint. A CFD analysis is also carried out. It is found that the separation point is near the inflection point within one fourth of the extension length or it is near the exit.

  • PDF

무진동 크레인 구현을 위한 속도경로설계 연구 (Velocity trajectory planning for the implementation of anti-swing crane)

  • 윤지섭;박병석
    • 한국정밀공학회지
    • /
    • 제11권5호
    • /
    • pp.143-152
    • /
    • 1994
  • The velocity trajectory profile of trolley is designed to minimize both swinging while transportation of load and the stop position error at the final stop position. This profile is designed to be automatically programmed by the digital control algorithm when the length of chain and the desired travel distance are given as a priori. Also, to minimize both swinging and the stop position error the anti-swing controller which improves poor damping characteristics of the crane and the stop position controller are employed. The experimentalresults of sequential adaptation of the velocity trajectory profile and these two controllers show that this control scheme has excellent control performance as compared with that of the uncontrolled crane system.

  • PDF

생육지의 토양염분농도에 대한 갈대 ( Phragmites communis Trin. ) 개체군의 적응 (Adaptation of Phragmites communis Trin. Population to Soil Salt Contents of Habitas)

  • Lee, Ho-Joon
    • The Korean Journal of Ecology
    • /
    • 제16권1호
    • /
    • pp.63-74
    • /
    • 1993
  • The ecotypic variation of Phragmites communis Trin. was studied from Aug. 1989 to March 1992 in three populations of salt marsh, estuary and fresh water areas of the western coastal regions in Korea. The length growth and aboveground total dry weight of Phragmites communis Trin. From three habitates were measured monthly and the seeds from them collected. Chlorophyll contents, bud number and width of Phragmites communis Trin. populations after their seeds were sown in seedbeds, and the growth of seedlings according to salt contents were also determined. The results lare summarized as follows: The height and basal diameter of shoot, leaf length and width, and total dry weight of Phragmites communis Trin. were very different from each other according to their natural habitats. The bud number of seeds was increased as sample sites moved from estuary to fresh water areas and salt marsh. The but the bud diameter turned out to be in reverse proportion to the bud number. The chlorophyll content of the population from fresh water was $8.6901{\mu}g/ml$, whereas that from estuary and salt marsh was $9.61801{\mu}g/ml$ and $10.3160{\mu}g/ml$, respectively. The average length growth and total dry weight of seedlings grown at different salt contents were compared. Those of fresh water area decreased at salt contents lower than 0.5% in culture solution and those of estuary at higher than 0.5%, but the population of salt marsh was shown to be capable of sustaining itself at 1.0%. All of these results suggested that the populations of Phragmites communis Trin. in the western coastal regions of Korea have undergone ecotypic variations: fresh water type, estuary type and salt marsh type.

  • PDF

Effective Exon-Intron Structure Verification of a 1-Pyrroline-5-Carboxylate-Synthetase Gene from Halophytic Leymus chinensis (Trin.) Based on PCR, DNA Sequencing, and Alignment

  • Sun, Yan-Lin;Hong, Soon-Kwan
    • 한국자원식물학회지
    • /
    • 제23권6호
    • /
    • pp.526-534
    • /
    • 2010
  • Genomes of clusters of related eukaryotes are now being sequenced at an increasing rate. In this paper, we developed an accurate, low-cost method for annotation of gene prediction and exon-intron structure. The gene prediction was adapted for delta 1-pyrroline-5-carboxylate-synthetase (p5cs) gene from China wild-type of the halophytic Leymus chinensis (Trin.), naturally adapted to highly-alkali soils. Due to complex adaptive mechanisms in halophytes, more attentions are being paid on the regulatory elements of stress adaptation in halophytes. P5CS encodes delta 1-pyrroline-5-carboxylate-synthetase, a key regulatory enzyme involved in the biosynthesis of proline, that has direct correlation with proline accumulation in vivo and positive relationship with stress tolerance. Using analysis of reverse transcription-polymerase chain reaction (RT-PCR) and PCR, and direct sequencing, 1076 base pairs (bp) of cDNA in length and 2396 bp of genomic DNA in length were obtained from direct sequencing results. Through gene prediction and exon-intron structure verification, the full-length of cDNA sequence was divided into eight parts, with seven parts of intron insertion. The average lengths of determinated coding regions and non-coding regions were 154.17 bp and 188.57 bp, respectively. Nearly all splice sites displayed GT as the donor sites at the 5' end of intron region, and 71.43% displayed AG as the acceptor sites at the 3' end of intron region. We conclude that this method is a cost-effective way for obtaining an experimentally verified genome annotation.

Farmers' Perceptions and Knowledge of Cattle Adaptation to Heat Stress and Tick Resistance in the Eastern Cape, South Africa

  • Katiyatiya, C.L.F.;Muchenje, V.;Mushunje, A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권11호
    • /
    • pp.1663-1670
    • /
    • 2014
  • The objective of this study was to determine the perceptions and knowledge of farmers of heat stress and tick resistance in cattle. A cross-sectional survey was conducted and 110 farmers in four villages in the sour and sweet velds of the Eastern Cape Province, South Africa were interviewed. The associations among area (municipality), gender, age, level of education, employment and religion were computed using Chi-square tests. The majority of the respondents had on average 4 bulls, 4 cows, 4 heifers, 4 calves, and 4 oxen. Milk was considered as the major (28.3%) reason for keeping cattle. Most farmers owned non-descript (72.6%), and Nguni (45.3%) cattle because of their heat tolerance (54.7%), tick resistance (54.7%), and milking ability (28.2%) traits. Excessive panting (56.6%) and disease transmission (76%) were regarded as the major effects of heat stress and tick infestation in cattle, respectively. About 50% of the respondents agreed that hair length influences tick resistance and 47.17% considered coat colour when acquiring cattle. In the sampled areas, ticks were prevalent in the summer season (93%), and 77.36% of the respondents use acaricides every fortnight. Gall sickness was reported to be a major problem in the cattle herds by 36.79% of the respondents. Our results showed that farmers in the two municipalities had knowledge of cattle adaptation to heat stress and tick resistance.