• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.60-65
• /
• 2003

At present. welding of most pipes with large diameter is carried out by the manual process. Automation of the welding process is necessary f3r the sake of consistent weld quality and improvement in productivity. In this study, two vision sensors, based on the optical triangulation, were used to obtain the information for seam tracking and detecting the weld defects. Through utilization of the vision sensors, noises were removed, images and 3D information obtained and positions of the feature points detected. The aforementioned process provided the seam and leg position data, calculated the magnitude of the gap, fillet area and leg length and judged the weld defects by ISO 5817. Noises in the images were removed by using the gradient values of the laser stripe's coordinates and various feature points were detected by using an algorithm based on the iterative polygon approximation method. Since the process time is very important, all the aforementioned processes should be conducted during welding.

• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1273-1277
• /
• 1992

Percutaneous Transluminal Angioplasty[PTA] was introduced by Dotter and JudKins [1964], using coaxial catheters of increasing diameter. The remarkable advances in vascular catheter technology over the past several decades have permitted the development. But the application of the balloon catheters carries with it the risk of arterial injury, thrombosis, embolism, and loss of life or limb. A 53-year-old man was admitted to other hospital due to a intermittent claudication in his right leg for 10 years. and PTA was performed at that hospital. Thereafter he was transferred to our hospital because of coldness, pulselessness, rest pain, ischemic ulcer, and progressing gangrene at the anterior aspect of left lower leg. The left lower extremity was salvaged by left ilio-femoral bypass and later saphenous in situ femoro-popliteal bypass.

• Journal of Chest Surgery
• /
• v.14 no.3
• /
• pp.274-279
• /
• 1981

We performed three replacement operations of great venous obstruction with Dacron prosthesis from July, 1980 to Nov. 1980. Summary of 3 cases as belows: 1) Inferior vena cava obstruction . 43 years old male was admitted because of abdominal distension and marked superficial collateral circulation on chest and abdomen. Inferior vena cavogram showed complete obstruction of I. V .C. just below hepatic vein. Bypass operation was done between Rt atrium '||'&'||' I. V.C. (just above renal vein) with Woven Dacron prosthesis (22mm in Diameter) under ex tracorporeal ci rculation. 2) Superior vena cava obstruction . 21 years old male was admitted because of facial edema and irritative cough. Well circumscribed lobulated mass was located at ant. superior mediastinum and extended to Rt. thorax in chest P-A view. Woven Dacron prosthesis (10mm in Diameter) was replaced at involved S.V.C. segment after Rt. upper '||'&'||' middle lobectomy with tumor resection. 3) Common iliac vein obstruction (Lt) . 64 years old female was admitted because of generalized edema and tenderness of Lt. lower extremity. Venography of Lt leg showed complete obstruction of common iliac vein. Woven Dacron prosthesis (10mm in Diameter) was replaced at obstruction site.eplaced at obstruction site.

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.562-568
• /
• 2007

Purpose: Many studies reported anatomy of posterior tibial artery perforator. But, it is not easy to use this flap in clinical case. Methods: Authors performed cadaver dissection on 26 legs from 13 cadavers and identified the number, location, type, length and diameter of perforator. Based on anatomic study, posterior tibial artery perforator flap was performed on 3 clinical cases. Results: The perforator was found on a line drawn from the medial boarder of central patella to posterior boarder of medial malleolus. The main perforator which was longer and greater caliber than others was found was found 13 to 17cm distant from medial boarder of central patella in 23 of 26 leg(88.5%). Average length was 6.2cm and average diameter was 1.4mm. The main perforator was musculocutaneous perforator at 20 of 26 leg(77%). The posterior tibial artery perforator flap was clinically use in 3 cases. All flap were survived without any complication. Conclusion: The author found the main perforator of posterior tibial artery perforator flap was located 15cm distant from medial boarder of central patella within the circle drawn with a radius of 4cm. The posterior tibial artery perforator flap is expected to be used as one of the option for the reconstruction of hand and foot.

• Archives of Reconstructive Microsurgery
• /
• v.11 no.2
• /
• pp.141-145
• /
• 2002

Rectus abdominis muscle free flap is widely used for breast reconstruction and soft tissue defect in lower leg but donor-site morbidities such as abdominal wall weakness, hernia, bulging are troublesome. Recently, to minimize donor-site morbidity, there has been a surge in interest in deep inferior epigastric perforator(DIEP) free flap preserving the anatomy of rectus abdominis muscle, fascia, and motor nerve. Between August of 1995 and September of 2002, topographic investigation of DIEP was performed during the elevation of 97 cases of TRAM free flap and 5 cases of DIEP free flap. There were 84 cases of breast reconstructions, 12 cases of lower leg reconstructions, and 6 cases of head and neck reconstruction. We could observe total 10 to 12 perforators on each rectus abdominis muscle below umbilicus. Among these, the numbers of large perforators(>1.5mm of diameter) were mean 2.1 in lateral half of rectus abdominis muscle, mean 1.2 in medial half, and mean 0.5 in linea alba and paramedian. DIEP free flap provides ample amount of well vascularized soft tissue without inclusion of any rectus abdominis muscle and fascia and minimizes donor-site morbidity. One perforator with significant flow can perfuse the whole flap. For large flap, a perforator of the medial row provides better perfusion to zone-4 than one of lateral row and, if diameter of perforator is small, $2{\sim}3$ perforators can be used. According to the condition of recipient-site, thin flap can be harvested. As DIEP free flap has many advantage, perforator topography will be useful in increasing clinical usage of DIEP free flap.

• Archives of Plastic Surgery
• /
• v.49 no.1
• /
• pp.108-114
• /
• 2022

Reconstruction of defects around the knee region requires thin and pliable skin. The superior lateral genicular artery (SLGA) flap provides an excellent alternative to muscle-based flaps. The anatomy and the surgical techniques of the SLGA flap were reviewed and the results of cases using the SLGA flap for coverage of knee and proximal leg defects were analyzed. SLGA flaps were performed in two cases and followed up for at least 6 months. Twelve articles on the use of the SLGA flap were also identified. A review of 39 cases showed that the mean diameter of the perforator supplying the skin of the flap was 1.04 mm, while the mean diameter of the SLGA at its origin was 1.78 mm. The mean length of the pedicle measured from the origin of the popliteal artery was 7.44 cm. The average dimensions of the flap were 14.8×6.6 cm with primary closure of the donor site in 61.5% of cases. Of these cases, 38.5% were due to trauma, 23.1% were post-burn complications, 12.8% were defects after resection of tumors, and 10.3% were for ulcers post-bursectomy. The most common complication was flap tip necrosis. All studies reported favorable outcomes with complete wound healing.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.106-109
• /
• 2006

In this paper, the design and characteristics of a novel ultrasonic motor are investigated. Such a motor is appropriate far use in the optical zoom or auto focusing functions of the lens system in mobile phones. Its design and simulation of performances are carried out by FEM commercial software (ATILA). The shape of the motor is similar to a square without one side, on which an optical lens can be mounted. Two sheets of piezoelectric ceramics are adhered to both sides of two legs of the elastic body, respectively To drive the ultrasonic motor, the voltage is applied to two sheets of piezoelectric ceramics bonded to one leg. The rotation direction can be easily changed by switching the piezoelectric sheets bonded to the other leg, to which voltage is applied. A proto type of the motor is fabricated and its outer size is $10^*10^*2[mm3]$ including the camera lens of which the diameter is 7.5(mm). Its power consumption is about 0.3[W] and the speed of rotation is adjustable from 10 to 200[rpm] according to the applied voltage

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.165-176
• /
• 2005

Natural gas in deep sediment may occur in three phases based on the physical and chemical conditions. If the concentration of gas in pore water is less than the solubility, gas is dissolved. If the concentration of gas is greater than its solubility (water is saturated or supersaturated with gas), gas occurs as a fee gas below the gas hydrate stability Lone (GHSZ) and is present as solid hydrate within the GHSZ. The knowledge of gas concentration in deep sediment appears critical to determine the phase of natural gases and to understand the formation and distribution of gas hydrate. However, reliable data on gas concentration are usually available only from the upper section of marine sediment by the headspace gas technique, which is widely used for sampling of gases from the sediments. The headspace gas technique represents only a fraction of gases present in situ because sediments release most of the gases during recovery and sampling. The PCS (Pressure Core Sampler) is a downhole tool developed to recover a nominal $1{\cal}m$ long, $4.32{\cal}cm$ diameter core containing $1,465cm^3$ of sediment, pore water and gas at in situ pressure up to 68.9 MPa. During Leg 204, the PCS was deployed at 6 Sites. In situ methane gas concentration and distribution of gas hydrate was measured by using PCS tool. Characteristics of methane concentration and distribution is different from site to site. Distribution of gas hydrate in the study area is closely related to characteristics of in situ gas concentration measured by PCS.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Journal of Veterinary Clinics
• /
• v.25 no.5
• /
• pp.408-410
• /
• 2008

A four months old, 3.6 kg intact female Miniature Dachshund dog was referred for non-weight bearing lameness at right hind limb due to car accident. On physical examination, the patient was non-weight bearing on the right hind leg and had moderate swelling in the proximal to middle tibia region. There was palpable crepitus. Radiographs revealed a slightly displaced, spiral, oblique fracture involving the proximal diaphyseal region of the right tibia. Fibular fracture was also noted. Internal fixation was performed to repair the fracture. Due to bowed shape of fractured tibia, it was not possible to apply K-wire, containing appropriate diameter ($60{\sim}80%$ of bone marrow diameter) for intramedullary fixation. We fixed the bowed tibia fracture using a smaller diameter (30% of bone marrow diameter) K-wire with cross pins and cerclage wires. Four weeks after the operation, radiographs demonstrated healing of the tibia fracture as well as the fibular fracture.