• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.92-100
• /
• 2016

To chemically prepare polypyrrole(pPy) coated fabrics(silk, cotton and nylon fabrics), the fabrics were first soaked in 0.4M oxidant $FeCl_3$/0.06M dopant anthraquinone-2-sulfonic acid solution for 5min at room temperature, and subsequently soaked in a 0.4M monomer pyrrole aqueous solution for 5min at room temperature. The content(wt%) of coated pPy in the coated fabrics was controlled by the number of treatments(these two steps). This study examined the effect of the number of treatments/pPy content on the sheet resistance, mechanical/bending properties and color behaviors of pPy coated fabrics. The coated pPy content, sheet resistance(${\Omega}$/square) and color strength(K/S) of pPy coated fabrics increased sharply with increasing number of treatments up to 20 times, while the increase slowed down afterward. The tensile strength, elongation at break and lightness($L^*$) decreased with increasing number of treatments. The tensile modulus and bending rigidity of coated fabrics increased significantly with increasing number of treatments/coated pPy content. This indicated that the flexibility of coated fabrics decreased considerably.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.211-222
• /
• 2017

In this study, we investigated the dyeing properties of the ultra-fine nylon suede non-woven fabric with Sulphur black dye regarding to the effect of dye concentrations, reducing agent contents, sodium carbonate contents, antioxidant contents, immersion temperature and exposure time in air by pad-steam process. The optimal conditions of dyeing for the ultra-fine nylon suede non-woven fabric were determined with dye concentration of 30% o.w.f., reducing agent content of $9{\sim}13g/{\ell}$, sodium carbonate content of $1{\sim}4g/{\ell}$, antioxidant content of $1{\sim}5g/{\ell}$, immersion temperature of $70^{\circ}C$, exposure time of 20 minutes in air and immersion time of 1 minute, respectively. Meanwhile, the colorfastness to washing, the colorfastness to light, and the colorfastness to perspiration for dyed ultra-fine nylon suede non-woven fabric were achieved in the range of 4-5 grades. The formaldehyde and arylamine were not detected on the ultra-fine nylon suede non-woven fabric by KC tests.

• 폴리머
• /
• 제31권3호
• /
• pp.177-183
• /
• 2007

본 연구에서는 라벤더 오일을 심물질로 이용하여 나노크기의 폴리(비닐 아세테이트)(poly(vinyl acetate), PVAc) 방향 입자를 유화-확산법으로 제조하였다. 방향 물질의 방출 시기와 속도 조절로 방향 캡슐의 지속성과 내구성을 얻기 위하여 제조 조건에 따른 나노 방향 입자의 특성과 방출 거동을 주사 전자 현미경, 전기 영동 광산란 분광 분석기, 자외선-가시광선 분광 분석기 및 고성능 액체 크로마토그래피를 이용하여 고찰하였다. 제조된 방향 입자는 실험 조건을 조절함에 따라 평균 입자 크기가 224 nm인 구상 나노 입자로 제조하는 것이 가능하였으며, 170시간 동안의 방출 거동을 비교.평가한 결과 PVA로 코팅한 방향 입자가 더 지속적이고 안정적인 초기 방출 거동을 보임을 확인할 수 있었다. 본 연구의 PVAc 나노 방향 입자는 직물 및 피혁제품 등에 대한 내구성 방향가공에 적용될 수 있을 것으로 기대된다.

• 한국실내디자인학회논문집
• /
• 제21권3호
• /
• pp.22-30
• /
• 2012

Nowadays the issue of environmental pollution and ecological destruction is not a simple issue but an important issue to be continuously considered. It is deemed that a study for recycled new materials is immediately required and this study is to analyze features and processing methods of new materials which can be used to interior space. We found the recycled new materials used for space through researching various web sits. And then we analyzed what the base materials are and classified that base materials are whether natural or artificial of the recycled materials. We classified processing methods of the recycled new materials after researching general processing methods. The result of this study would be an important material to the research and development of new finishing materials with consideration of environment and to the research for a guideline of applicable new materials. The results of this study are as follows : First, we could classify widely 2 categories into natural material and artificial material and then 10 subcategories into metal, glass, wood, rubber, stone, plastic, leather or fabric, ceramic, concrete and so on, and analyzed that which material is mostly used and whether it is single material or multiple material. In order to analyze the feature of processing method. Second, we could classify into 4 categories such as junction, surface process, molding, and insert, and found out which processing method is applied based on objects of research. Third, as an analysis result of the recycled new material feature, in order to develop various new materials, it is required to study on combination and application of 2 materials or more rather than single material. Four, as a analysis result of the processing method feature, I would like to suggest that development and application of various processing methods are required. Especially, it is necessary to grope for a way to develop new functional materials for interior space through a systemic research and analysis of processing method of other fields. Furthermore, a way to reuse recycled new materials should be considered in a stage of selection and application of processing method.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.153-160
• /
• 2021

In this study, composite materials were prepared by varying the content of glass fiber and bamboo fiber in PP/glass fiber/bamboo fiber. Experiments were conducted to confirm the mechanical properties(tensile, impact and burst strength) and volatile organic compound content of the bamboo fiber composite prepared under these conditions. An improvement in the main properties was observed at a fiber content of 30wt%. When the fiber fraction was increased above 30wt%, the mechanical properties tended to decrease due to the agglomeration of fibers at higher load fractions. In addition, the content of volatile organic compounds increased as the content of bamboo fibers increased, which is thought to be due to the volatile organic compounds generated during the manufacturing process of the composite material being present in the composite material without escaping from the pores of the bamboo fibers and volatilizing at a certain temperature. As a result of confirming the physical properties of the composite, it is considered that the optimal mixing condition is 30wt% of bamboo fiber for the composite produced by varying the amount of bamboo fiber composite. In the future, it is thought that follow-up experiments to confirm and improve the pre-treatment conditions for reducing the content of volatile organic compounds in the manufactured composite material are possible.

• 청정기술
• /
• 제20권3호
• /
• pp.232-240
• /
• 2014

폴리염화비닐(polyvinyl chloride, PVC)은 자동차 내장재(도어 트림 및 대쉬 보드 등)에 아주 널리 사용되고 있으나 특정조건에서 유해물질을 배출하므로 규제가 되는 소재로 알려져 있다. 그러므로 열가소성 폴리올레핀계 고분자인 폴리프로필렌(polypropylene, PP)이 자동차 내장재 부분에서 PVC를 대체할 수 있는 중요한 재료로 부각되고 있다. PP(비정영역:0.855, 결정영역:$0.946g/cm^3$)의 또 다른 장점은 PVC($1.1{\sim}1.45g/cm^3$)에 비해 밀도가 낮으므로 자동차의 중량을 줄일 수 있다는 것이다. 한편 모든 부품은 표면보호와 미관상 코팅이 반드시 필요하며, 그들을 조립하는데 접착제가 필요하다. 지금까지 주로 사용해 온 용제-베이스의 접착제/코팅제의 경우 휘발성 유기화합물(volatile organic compounds, VOC)의 발생과 열악한 작업 환경으로 환경친화적인 수성 접착제/코팅제의 수요가 증가하고 있다. 이러한 맥락에서 본 연구에서는 소수성 고분자 PP에 적용되는 환경친화적인 다양한 수분산 폴리우레탄-우레아 선처리제(primer: 마감도료가 기질에 보다 잘 접착될 수 있도록 선처리하는 도료)를 이온성분 dimethyl propionic acid (DMPA) 함량별, 다양한 NCO/OH 몰비, 변성 실리콘 디올의 다양한 함량 및 소프트세그먼트 함량 등의 여러 배합으로 제조하였다. 제조된 시료 중 DMPA 함량 21 mol%, 소프트세그먼트 함량 73%, 변성 실리곤 디올 5 wt% 및 NCO/OH 몰비 1.2를 사용한 시료가 기질 PP 시트와의 접착력이 우수하였으며, 첨가제는 분산제 0.5 wt%, 레벨링제 0.5 wt%, 소포제 1.5 wt% 및 소광제 3.0 wt%가 가장 적합한 첨가 함량임을 알 수 있었다.