• Title/Summary/Keyword: least depth

Search Result 458, Processing Time 0.033 seconds

Changes In Mechanical Strength of Compression HIP Screws in Relation to Design Variations - A Biomechanical Analysis

  • Moon S. J.;Lee H. S.;Jun S. C.;Jung T. G.;Ahn S. Y.;Lee H.;Lee S. J.
    • Journal of Biomedical Engineering Research
    • /
    • v.26 no.2
    • /
    • pp.123-127
    • /
    • 2005
  • Compression Hip Screw (CHS) is one of the most widely-used prostheses for the treatment of intertrochanteric fractures because of its strong fixation capability. Fractures at the neck and screw holes are frequently noted as some of its clinical drawbacks, which warrant more in-depth biomechanical analysis on its design variables. The purpose of this study was to evaluate changes in the strength with respect to the changes in design such as the plate thickness and the number of screw holes. Both mechanical test and FEM analysis were used to systematically investigate the sensitivities of the above-mentioned design variables. For the first part of the mechanical test, CHS (n=20) were tested until failure. The CHS specimens were classified into four groups: Group Ⅰ was the control group with the neck thickness of 6-㎜ and 5 screw holes on the side plate, Group Ⅱ 6-㎜ thick and 8 holes, Group Ⅲ 7.5-㎜ thick and 5 holes, and Group Ⅳ 7.5-㎜ thick and 8 holes. Then, the fatigue test was done for each group by imparting 50% and 75% of the failure loads for one million cycles. For the FEM analysis, FE models were made for each group. Appropriate loading and boundary conditions were applied based on the failure test results. Stresses were assessed. Mechanical test results indicated that the failure strength increased dramatically by 80% with thicker plate. However, the strength remained unchanged or decreased slightly despite the increase in number of holes. These results indicated the higher sensitivity of plate thickness to the implant strength. No fatigue failures were observed which suggested the implant could withstand at least one million cycles of fatigue load regardless of the design changes. Our FEM results also supported the above results by showing a similar trend in stress as those of mechanical test. In summary, our biomechanical results were able to show that plate thickness could be a more important variable in design for reinforcing the strength of CHS than the number of screw holes.

Korean Music Therapy Students' Growth in Supervision: A Modified Grounded Theory (음악치료 전공생이 수퍼비전에서 경험하는 성장에 대한 연구)

  • Yun, Juri
    • Journal of Music and Human Behavior
    • /
    • v.10 no.2
    • /
    • pp.35-54
    • /
    • 2013
  • The purpose of this study was to examine how Korean music therapy students experience growth under clinical supervision. The investigator conducted in-depth qualitative interviews with 9 students from 3 different universities in Seoul who had at least three semesters of clinical supervision. Data was analyzed using a modified grounded theory approach to construct the growth experience of music therapy supervisees. Results suggest that growth can be understood in terms of both personal and professional domains and includes four types of experiences: growth hindering, fostering, mediating, and revealing. In the personal domain, hindering factors are defensiveness, narcissistic trauma, avoidance and anxiety whereas growth fostering and mediating factors include reflection on self, musical self, unconscious drives and conflicting issues as well as self-driven problem solving skills. As a result, growth in the personal domain is associated with increased self-acceptance and self-awareness. Growth in the professional domain is hindered by having trust issues, performance anxiety, identity crisis, and being hypersensitive to the judgment of others. On the other hand, growth is fostered and mediated by opening the self and interacting more with others, building trusting relationships with peers and supervisors, and establishing a new relationship with music, which leads to improved attitude, increased motivation, and more efficient and effective training.

Evaluation of Low or High Permeability of Fractured Rock using Well Head Losses from Step-Drawdown Tests (단계양수시험으로부터 우물수두손실 항을 이용한 단열의 고.저 투수성 평가)

  • Kim, Byung-Woo;Kim, Hyoung-Soo;Kim, Geon-Young;Koh, Yong-Kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.10 no.1
    • /
    • pp.1-11
    • /
    • 2012
  • The equation of the step-drawdown test "$s_w=BQ+CQ^p$" written by Rorabaugh (1953) is suitable for drawdown increased non-linearly in the fractured rocks. It was found that value of root mean square error (RMSE) between observed and calculated drawdowns was very low. The calculated $C$ (well head loss coefficient) and $P$ (well head loss exponent) value of well head losses ($CQ^p$) ranged $3.689{\times}10^{-19}{\sim}5.825{\times}10^{-7}$ and 3.459~8.290, respectively. It appeared that the deeper depth in pumping well the larger drawdowns due to pumping rate increase. The well head loss in the fractured rocks, unlike that in porous media, is affected by properties of fractures (fractures of aperture, spacing, and connection) around pumping well. The $C$ and $P$ value in the well head loss is very important to interpret turbulence interval and properties of high or low permeability of fractured rock. As a result, regression analysis of $C$ and $P$ value in the well head losses identified the relationship of turbulence interval and hydraulic properties. The relationship between $C$ and $P$ value turned out very useful to interpret hydraulic properties of the fractured rocks.

Study on Main Factors for Imported Brand launching: Focus on Exclusive Importation Fashion Apparel Brand (수입 브랜드 도입을 위한 주요 요인 연구: 독점 수입 패션 의류 브랜드를 중심으로)

  • LYU, Moon-Sang
    • The Journal of Industrial Distribution & Business
    • /
    • v.10 no.8
    • /
    • pp.45-53
    • /
    • 2019
  • Purpose - The purpose of this study was to clarify the factors to make an exclusive importation contract between foreign fashion brands and local retailers for successful business in Korea. Even though imported fashion brand market shows stead increasing in terms of sales amount, the number of store related study was very rare in fact. Meanwhile, as long as this business is glowing a lot of brands are suffering from bad business performance or getting in ruins thus these problems result in foreign currency loss. The local marketers therefore, strongly expect to know the solution for this matter. Research design, data, and methodology - For the qualitative research, 10 experts who are operating foreign brands with an exclusive contract at a department store or at duty free shop now and who had at least over 10 years of related working experience were included. The factors for the exclusive importation contract with foreign brands were drawn up through the one-to-one in-depth interview method from September 3, 2017 to January 15, 2018. The expert group for the validity analysis includes 2 professors and 5 postgraduate students. Results - As a result of qualitative study on the factors for imported fashion brand's launching with the exclusive importation contract, it turned out that there were 5 factors - safety, profitability, reliability, speed and global retailing. Safety, profitability, and reliability have been mentioned in most related surveys but some details are added and speed and global retailing have been newly highlighted and many unknown legal issues that it was not easy to get form common academic research are included. Speed simply means quick lead time and global retailing means stores where located in other countries. Conclusions - The reason that qualitative research should be done before the quantitative research is due to the scant theoretical background for this matter. Because the market of an imported fashion brand is steadily increasing, determining the factors to make exclusive importation contract is very meaningful from the point of academic and business. After this study, many marketers may get basic conditions to apply for real business and I hope the following quantitative research will give more effective results. The next study also will have extended range concerning industry area, product and distribution channel.

Impacts of Flooding Depths on Weed Occurrence and Yield in No-tillage Paddy Field Covered with Chinese Milk Vetch (무경운 자운영 피복 논에서 담수 깊이가 잡초발생과 수량에 미치는 영향)

  • Hong, Kwang-Pyo;Lee, Young-Han
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.44 no.2
    • /
    • pp.176-180
    • /
    • 2011
  • Rice production depended on the weed control. The purpose of this study was conducted to evaluate the influence of tillage with chemical amendments + 5 cm flooded, no-tillage without Chinese milk vetch + 5 cm flooded (NTNT 5 cm), no-tillage amended with Chinese milk vetch + 5 cm flooded (NTCM 5 cm), and no-tillage amended with Chinese milk vetch + 10 cm flooded (NTCM 10 cm) on weed occurrence and yield of rice in paddy. Triplicate experimental plots were laid out in a randomized complete block design and compared by employing least significant difference. The dry weights of weeds in NTCM 5 cm and NTCM 10 cm were 11% and 4% level of NTNT 5 cm (p<0.05) and were 3.2 times and 1.2 times more than in conventional tillage system. In addition, the Aneilema keisak and Ludwigia prostrata were significantly increased in NTNT 5 cm (p<0.05). The yield of rice grain in NTCM 10 cm was 2.6 times more than in NTNT 5 cm and was 89% level of conventional tillage system. Our findings suggest that NTCM 10 cm should be enhance of weed control as well as improving of yield of rice in paddy.

Minimizing Nutrient Loading from SCB Treated Paddy Rice Fields through Water Management (SCB 액비 시용 논에서 물관리를 통한 양분의 수계 부하 최소화 방안)

  • Kim, Min-Kyeong;Kwon, Soon-Ik;Kang, Seong-Soo;Jung, Goo-Bok;Hong, Seung-Chang;Chae, Mi-Jin;So, Kyu-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.45 no.5
    • /
    • pp.671-675
    • /
    • 2012
  • This study was conducted to establish the BMPs (Best Management Practices) for preventing pollutant loadings from paddy rice field applied livestock liquid manure from 2008 through 2011. Cultivated paddy rice fields (Gyeonggi province, Korea) were treated with SCB (Slurry composting and bio-filtration process) liquid fertilizer. The BMPs for paddy rice field developed in this study includes: 1) the controlling a drainage water gate in paddy rice field from right after SCB liquid fertilizer application to 3 weeks after rice transplanting; 2) livestock liquid fertilizer application to paddy rice soils in 20 days before rice transplanting to encourage the utilization of liquid fertilizer; 3) preservation of surface water depth to 5 cm in a paddy field right after SCB liquid fertilizer applied to minimize a water pollution and enhance the utilization of liquid fertilizer; and 4) blocking a water gate at least for 2 days to inactivate E. coli survival. The findings of this study will provide useful and practical guideline to applicators of agricultural soil in deciding appropriate handling and time frames for preventing pollution of water quality for sustainable agriculture.

The case study on interview mise-en-scène of documentary film (다큐멘터리 <노무현입니다> - 인터뷰 미쟝센 사례 연구)

  • Lee, Changjae;Sim, Jihyun
    • Trans-
    • /
    • v.7
    • /
    • pp.81-101
    • /
    • 2019
  • Interviews are so important and meaningful that it is the heart of the documentary. In narrative film, it is focused as the story discourse, whereas documentary is strong in disclosure, which consists of narration and interview. In a TV documentary, interviews use conventional shots repeatedly, whereas in a documentary film that targets a relatively large screen, the interviewer's Mise-en-scene should consider the aesthetic depth. , which released in 2017 and used the audience for the third time in documentary film history, tries to make 40% of the volume of the main volume equal to the same angle. In a TV documentary, it is not uncommon for an interview cut to exceed 30 seconds, and if it exceeds 1 minute, immersion is significantly lowered, so the a mount and compression of the interview disclosure is important for both the director and the audience. In the case of the interview sequence of , it was the key to communicate the sub-plot with a relatively focused with long discourse, which is at least 8 minutes and 30 seconds to a maximum of 11 minutes, in a way that allows the audience to communicate. Furthermore, it was produced after the death of the protagonist Roh Moo Hyun, with the limitation that the voice of the protagonist was excluded, and the voice of Roh Moo Hyun was indirectly reproduced through the surrounding characters. In this study, it covers the meaning and scope of interviews in the production of documentary, and the aesthetic applications of the Mise-en-scene.

  • PDF

Phytotoxicity of imazosulfuron+fentrazamide in different cultivation type of rice (Imazosulfuron+fentrazamide 혼합제의 재배양식에 따른 벼의 약해)

  • Won, OK Jae;Kang, Kwang Sik;Park, Su Hyuk;Eom, Min Yong;Hwang, Ki Seon;Suh, Su Jeong;Pyon, Jong Yeong;Park, Kee Woong
    • Korean Journal of Agricultural Science
    • /
    • v.42 no.1
    • /
    • pp.15-22
    • /
    • 2015
  • This study was conducted to evaluate the phytotoxicity of imazosulfuron+fentrazamide mixture in rice field. It is recommended that safe herbicide application was obtained at 3 cm of transplanting depth and in sandy loam or loam soil type. In the direct water seeding of rice, imazosulfuron+fentrazamide SC should be applied at least 10 days before sowing land ower than 25+100 g ai/ha. In case of imazosulfuron+fentrazamide SC application after sowing, If we use the herbicide 15 days after sowing, no herbicide symptoms will be detected even though the amounts of the herbicide increase. In the rice transplanting, it is recommended that imazosulfuron+fentrazamide GR is applied 5 days after transplanting. In case of sequential herbicide application, the imazosulfuron+fentrazamide SC application at 75+300 g ai/ha 15 or 20 days after transplanting after the application at 25+100 g ai/ha or 50+200 g ai/ha 3 days before sowing increases weed control efficacy and gives no phytotoxicity in the rice growth.

Site Characterization using Shear-Wave Velocities Inverted from Rayleigh-Wave Dispersion in Wonju, Korea (레일리파 분산을 역산하여 구한 횡파속도를 이용한 원주시의 부지특성)

  • Kim, Chungho;Ali, Abid;Kim, Ki Young
    • Geophysics and Geophysical Exploration
    • /
    • v.17 no.1
    • /
    • pp.11-20
    • /
    • 2014
  • To reveal shear-wave velocities ($v_s$) and site characterization of Wonju, Korea, Rayleigh waves were recorded at 78 sites of lower altitude using 12 to 24 4.5-Hz vertical geophones for 20 days during the period of February to September 2013. Dispersion curves of the Rayleigh waves obtained by the extended spatial autocorrelation method were inverted using the damped least-squares method to derive $v_s$ models. From these 1-D models, the average $v_s$ to a depth of 30 m ($v_s30$), $v_s$ of weathered rocks, depths to these basement rocks, and average $v_s$ of the overburden layer were derived to be $16.3{\pm}0.7m$, $576{\pm}8m/s$, $290{\pm}7m/s$, and $418{\pm}13m/s$, respectively, in the 95% confidence range. To determine adequate proxies for $v_s30$, we computed correlation coefficients of $v_s30$ with topographic slope (r = 0.46) and elevation (r = 0.43). An empirical linear relationship is presented as a combination of individually estimated $v_s30$ with weighting factors of 0.45, 0.45, and 0.1 for topographic slope, elevation, and mapped lithology, respectively. Due to a weak correlation between $v_s30$ obtained from inversion of dispersion curves and the proxy-based estimation (r = 0.50), however, the relatively large error range should be considered for applications of this relationship.

Vegetation History of Wangdeungjae Moor, Mt. Jiri in Korean Peninsula (지리산 왕등재늪의 식생변천사 연구)

  • Jang, Byeang-O;Sin, Seang-Uk;Choi, Kee-Ryang
    • Journal of Ecology and Environment
    • /
    • v.29 no.3
    • /
    • pp.287-293
    • /
    • 2006
  • We carried out pollen analysis and radiocarbon dating from sediments of Wangdeungjae moor (960 m a.s.l.) to clarify vegetation history of temperate broad-leaved deciduous forest zone of Mt. Jiri. Three local pollen zones and two sub-zones were recognized on the basis of variation in the palynofloral assemblage: I. Quercus zone (150-114 cm), II. Quercus-Pinus zone (114-43 cm): IIa. Quercus-Pinus subzone (114-83 cm), IIb. Quercus-Pinus-Herbs subzone (83-43 cm), III. Pinus-Quercus zone (43-27 cm). Radiocarbon date from sediment depth 111-116 cm was estimated $1,160{\pm}40yr$ B.P. From these results, overall vegetation around of Wangdeungjae moor and Mt. Jiri have changed from Q. mongolica dominant to steady decrease of Q. mongolica whereas steady increase of P. densiflora, finally abrupt increase of P. densiflora. 'Medieval Warm Period (MWP)' and 'Little Ice Age (LIA)' have not had an effect on change of vegetation around, at least, Mt. Jiri. But at maximum period of LIA, extension of grassland and steady increase of Pinus were recognized around the moor. After then, an abrupt increase of Pinus is supposed that vegetation change is reflected in human impact surging around foothills.