• 제목/요약/키워드: leaf wetness

검색결과 27건 처리시간 0.031초

Effect of Temperature and Leaf Wetness Period on the Components of Resistance to Late Leaf Spot Disease in Groundnut

  • Pande, Suresh;Rajesh, T.Ratna;Kishore, G.Krishna
    • The Plant Pathology Journal
    • /
    • 제20권1호
    • /
    • pp.67-74
    • /
    • 2004
  • A complete understanding of the epidemiological factors required for optimum for disease development facilitates the design of effective and reliable screening techniques and also disease prediction models. An attempt was made to study the effects of different temperatures ($15-35^{\circ}C$) and leaf wetness periods (4-24 h) on the development of late leaf spot (LLS) in three groundnut genotypes differing in their susceptibility to LLS infection. Irrespective of the genotype, the disease progress evaluated based on different components of resistance was maximum between $15-20^{\circ}C$ and minimum between $20-25^{\circ}C$. At temperatures $\geq$$30^{\circ}C$, LLS development was insignificant. The overall severity of LLS increased with an increase in the leaf wetness period from 4 h to 12 h a day. Further increase of wetness period to 16 h resulted in a rapid increase in the severity. Thereafter, the disease severity gradually decreased with an increase in the wetness period. The effect of temperature and wetness periods on the individual component of disease quantification was not uniform compared between genotypes with different levels of susceptibility/resistance to LLS infection. The results of this study indicate that temperature and leaf wetness period are critical in late leaf spot screening programs since the expression of disease symptoms measured from disease initiation till defoliation, varied differently in the test genotypes with respect to change in these two parameters.

서리 탐지를 위한 '무인 다중센서 기반의 관측 시스템' 고안, 설치 및 시험 운영 (Unmanned Multi-Sensor based Observation System for Frost Detection - Design, Installation and Test Operation)

  • 김수현;이승재;손승원;조성식;조은수;김규랑
    • 한국농림기상학회지
    • /
    • 제24권2호
    • /
    • pp.95-114
    • /
    • 2022
  • 본 연구는 MFOS라 명명한 다중센서 기반의 서리 관측 시스템의 고안 및 설치를 통해 서리의 자동 관측 가능성 및 실제 서리 발생 시 관련 영상 자료를 제시하였다. MFOS의 구성은 RGB 카메라, 열화상 카메라, LWS이며, 각 장비들은 서로 상보적인 역할을 수행한다. 서리 발생 전 장비의 시험 운영을 통해, 무강수 사례인 경우 높은 상대습도를 유지할 때 LWS의 전압값은 증가하였고, 특히 주변의 농수로로 인해 높은 상대습도가 유지되는 가평군 관측지에서 크게 증가하였다. RGB 카메라 이미지에서는 일출 전과 일몰 후에 LWS와 지표면을 관측할 수 없었으나 나머지 시간에 대해서는 가능하였다. 강수 사례의 경우 강수 기간 동안 LWS의 전압값은 급격하게 증가하였고, 강수 종료 후 감소하였다. RGB 카메라 이미지는 강수 현상과 상관없이 LWS와 지표면을 관측하였다. 반면, 열화상 카메라의 경우 강수 현상으로 인해 이미지 촬영은 되었지만 LWS와 지표면을 관측하지 못했다. 실제 서리가 발생한 사례의 자료를 통해, LWS의 전압값이 서리에 해당하는 범위보다 높더라도 RGB 카메라가 서리의 지표면 및 장비 표면 발생을 관측할 수 있는 것으로 나타났다.

Estimation of Leaf Wetness Duration Using An Empirical Model

  • Kim, Kwang-Soo;S.Elwynn Taylor;Mark L.Gleason;Kenneth J.Koehler
    • 한국농림기상학회:학술대회논문집
    • /
    • 한국농림기상학회 2001년도 춘계 학술발표논문집
    • /
    • pp.93-96
    • /
    • 2001
  • Estimation of leaf wetness duration (LWD) facilitates assessment of the likelihood of outbreaks of many crop diseases. Models that estimate LWD may be more convenient and grower-friendly than measuring it with wetness sensors. Empirical models utilizing statistical procedures such as CART (Classification and Regression Tree; Gleason et al., 1994) have estimated LWD with accuracy comparable to that of electronic sensors.(omitted)

  • PDF

Development of A Leaf Wetness Duration Model Using a Fuzzy Logic System

  • Kim, K.S.;S.E.Taylor;M.L.Gleason
    • 한국농림기상학회:학술대회논문집
    • /
    • 한국농림기상학회 2003년도 춘계 학술발표논문집
    • /
    • pp.50-53
    • /
    • 2003
  • Models have been developed to estimate leaf wetness duration (LWD) using conventional weather observations, e.g., air temperature, water vapor pressure, and wind speed, which are relatively invariant over space (Pedro and Gillespie, 1982; Gleason et al., 1994; Francl and Panigrahi, 1997).(omitted)

  • PDF

Validation of an Anthracnose Forecaster to Schedule Fungicide Spraying for Pepper

  • Ahn, Mun-Il;Kang, Wee-Soo;Park, Eun-Woo;Yun, Sung-Chul
    • The Plant Pathology Journal
    • /
    • 제24권1호
    • /
    • pp.46-51
    • /
    • 2008
  • With the goal of achieving better integrated pest management for hot pepper, a disease-forecasting system was compared to a conventional disease-control method. Experimental field plots were established at Asan, Chungnam, in 2005 to 2006, and hourly temperature and leaf wetness were measured and used as model inputs. One treatment group received applications of a protective fungicide, dithianon, every 7 days, whereas another received a curative fungicide, dimethomorph, when the model-determined infection risk (IR) exceeded a value of 3. In the unsprayed plot, fruits showed 18.9% (2005) and 14.0% (2006) anthracnose infection. Fruits sprayed with dithianon at 7-day intervals had 4.7% (2005) and 15.4% (2006) infection. The receiving model-advised sprays of dimethomorph had 9.4% (2005) and 10.9% (2006) anthracnose infection. Differences in the anthracnose levels between the conventional and model-advised treatments were not statistically significant. The efficacy of 10 (2005) and 8 (2006) applications of calendar-based sprays was same as that of three (2005 and 2006) sprays based on the disease-forecast system. In addition, we found much higher the IRs with the leaf wetness sensor from the field plots comparing without leaf wetness sensor from the weather station at Asan within 10km away. Since the wetness-periods were critical to forecast anthracnose in the model, the measurement of wetness-period in commercial fields must be refined to improve the anthracnose-forecast model.

A Model To Enhance Site-Specific Estimation Of Wetness Duration Using A Wind Speed Correction

  • Kim, Kwang-Soo;S.Elwynn Taylor;Mark L.Gleason;Kenneth J.Koehler
    • 한국농림기상학회:학술대회논문집
    • /
    • 한국농림기상학회 2001년도 춘계 학술발표논문집
    • /
    • pp.163-166
    • /
    • 2001
  • One of the most important factors influencing the outbreak and severity of foliar diseases is the duration of wetness from dew deposition, rainfall, or irrigation. Models may provide good alternatives for assessing leaf wetness duration (LWD) without the labor, cost, and inconvenience of making measurements with sensors.(omitted)

  • PDF

Estimation of Leaf Wetness Duration Using Empirical Models in Northwestern Costa Rica

  • Kim, K.S.;S.E.Taylor;M.L.Gleason
    • 한국농림기상학회:학술대회논문집
    • /
    • 한국농림기상학회 2003년도 춘계 학술발표논문집
    • /
    • pp.54-57
    • /
    • 2003
  • Implementation of disease-warning systems often results in substantial reduction of spray frequency (Lorente et al., 2000; Madden et al., 2000). This change reduces the burden of pesticide sprays on the environment and can also delay the development of fungicide and bactericide resistance. To assess the risk of outbreaks of many foliar diseases, it is important to quantify leaf wetness duration(LWD) since activities of foliar pathogen depend on the presence of free water on host crop surface for sufficient periods of time to allow infection to occur.(omitted)

  • PDF

잎도열병(稻熱病) 발생(發生)에 미치는 온도(溫度), 상대습도(相對濕度) 및 잎표면상(表面上)의 수분존재시간(水分存在時間)의 영향(影響) (Effects of Temperature, Relative Humidity, and Leaf Wetness Period on the Development of Rice Leaf Blast)

  • 최우정;박은우;이은종
    • 한국응용곤충학회지
    • /
    • 제26권4호
    • /
    • pp.221-228
    • /
    • 1987
  • 도열병균(稻熱病菌)(Pyricularia oryzae)의 포자발아(胞子發芽)에 가장 적합한 온도는 $26{\sim}30^{\circ}C$였으며, 발아(發芽)에 필요한 최소한의 수분존재시간(水分存在時間)은 4시간으로 나타났고, $34^{\circ}C$에서는 발아율(發芽率)이 10% 이하로 낮게 나타났다. 포자발아(胞子發芽)에 대한 상대습도의 영향은 고온(高溫)인 $34^{\circ}C$에서만 차이가 있었고 나머지 처리에서는 유의적(有意的)인 차이가 없었다(P>0.05). 발병효율(發病效率)은 $26^{\circ}C$에서 가장 높게 나타났으며 $18^{\circ}C$$22^{\circ}C,\;30^{\circ}C$에서는 $26^{\circ}C$에 비해 약 20% 정도였다. 주당(株當) 1개 이상의 병반(病斑)을 형성하는데 필요한 평균수분존재시간(平均水分存在時間)은 $18^{\circ}C$에서 22시간, $22^{\circ}C$에서 16시간, $26^{\circ}C$에서 10시간, $30^{\circ}C$에서는 8시간이었으며, $34^{\circ}C$에서는 주당(株當) 1개 이상의 병반(病斑)을 형성하지 못하였다. 접종(接種)후 병반(病斑) 발현시(發現時)까지의 잠복기간(潛伏其間)은 $18^{\circ}C$에서 $7{\sim}8$일(日), $22{\sim}26^{\circ}C$에서는 약 $4{\sim}5$일(日), $30^{\circ}C$에서는 $3{\sim}4$일(日)이었다. 병반(病斑) 크기 증가율(增加率)은 온도 및 습도조건과 밀접한 관계를 보였다. 1일당(日當) 평균(平均) 병반(病斑) 크기 증분(增分)은 상대습도 90% 이상인 경우, $18^{\circ}C$$22^{\circ}C$에서 0.7mm, $26^{\circ}C$에서 1mm, $30^{\circ}C$에서는 0.8mm 였고, 상대습도 85% 이하에서는 $30^{\circ}C$를 제외한 온도 조건에서 90% 이상에서의 증분(增分)의 $50{\sim}60%$ 밖에 되지 않았다.

  • PDF