• Korean Journal of Ecology and Environment
• /
• v.46 no.3
• /
• pp.319-331
• /
• 2013

Recent climate change, which is mostly ascribed to anthropogenic activities, is believed to be a major factor leading to biodiversity decreases and ecosystem service deteriorations. I have reviewed recent studies on climate change effects for many ecological processes involved with plants, in order to improve our understanding of the nature of ecological complexity. Plants in general have better growth and productivity under high levels of $CO_2$, although the long term effects of such $CO_2$ fertilizers are still controversial. Over the last 30 years, the Earth has been greening, particularly at higher latitudes of the Northern Hemisphere, perhaps due to a relaxation of climatic constraints. Human appropriation of net primary productivity (NPP), which corresponds up to 1/3 of global NPP, is ultimately responsible for climate change and biodiversity decreases. Climate change causes phenological variations in plants, especially in regards to spring flowering and fall leaf coloring. Many plants migrate polewards and towards higher altitudes to seek more appropriate climates. On the other hand, tree mortality and population declines have recently been reported in many continents. Landscape disturbance not only hinders the plant migration, but also makes it difficult to predict the plants' potential habitats. Plant and animal population declines, as well as local extinctions, are largely due to the disruption of species interactions through temporal mismatching. Temperature and $CO_2$ increase rates in Korea are higher than global means. The degree of landscape disturbances is also relatively high. Furthermore, long-term data on individual species responses and species interactions are lacking or quite limited in Korea. This review emphasizes the complex nature of species responses to climate change at both global and local scales. In order to keep pace with the direction and speed of climate change, it is urgently necessary to observe and analyze the patterns of phenology, migration, and trophic interactions of plants and animals in Korea's landscape.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.1
• /
• pp.1-5
• /
• 1991

Tall fescue(Festuca amndinacea Schreb.) is a productive pasture grass that is widely adapted to the soil and climate of Korea. It is regarded, however, as relatively low in palatability and nutritive value. On the other hand, Italian ryegrass(lo1ium rnultz$om Lam.) is highly nutritious and palatable, but is essentially weak in cold tolerance. Numerous investigators have succeeded in producing hybrids between Lolium spp. and Festuca spp. but no improved varieties have resulted. Therefore, intergeneric hybridization of Italian ryegrass with tall fescue is employed in 1984 to improve the adaptive and cold resistance quality of Italian ryegrass. In the mean time, F1-hybrid plants obtained by crossing Italian ryegrass x tall fescue were observed in open field. The results are summarized as follows: 1. Leaf-size and silica cell hair were intermediate between the types of parents but the shape of auricle tended to show Italian ryegrass and auricle-cilia to show tall fescue. 2. Roots of $F_1$-hybrid plants were mainly distributed at top soil and did not produced florescence material. 3. Head type of hybrids was intermediate between the types of parents but ray length was somewhat less than the length of tall fescue ray. Typical Italian ryegrass or tall fescue-like phenotypes were not observed. 4. Anthers of $F_1$-hybrid plants were formed but pollen were not formed. Even though pollen were formed, they were all empty. 5. Hybrid plants were more winterhardy and summer persistency than Italian ryegrass. They showed a equivalent growth to Italian ryegrass in spring and to tall fescue in summer. 6. Chromosome of $F_1$-hybrids was allopolyploid(2n=4~=28) and all $F_1$-hybrid plants were sterile.

• Journal of Plant Biology
• /
• v.5 no.2
• /
• pp.13-16
• /
• 1962

Without annual ring, the bamboo can not measured by ordinary mensuration method. Other methods yet tried failed to prove the reliability. That means, as often pointed out, that the bamboo lumbering (including forest management) is not free from being precarious. Noting the fact, this author performed a serieds of comparative observations on a group of bamboos in different stages of growth in order to find out if there is any surer mensurability. A conclusion has been reached that the external feature of joints of branch has close connection with the age of bamboo, that the joints of the third major branch counting from the ground have, as shown in the first table, the most probability, its mean being 94.3 per cent, and that those in ages of 3 to 5 have the probability of 100 per cent, showing the far greater accuracy as compared with those in older ages. The above conclusion needs to be adjusted with the following findings; 1) When observed disregarding the joint-tongue(the remainder of the preceeding year's sheath), the major branches show no better probability than the minor ones. 54 to 78 per cent of them shows no difference between them. Probability is averaged by 60 per cent. 2) When in spring the old sheaths drop away from the joints, the new ones sprout out in their places and consequently the joints present an appearance of a kind of joint-ring. But since this joint-ring does not always exactly represent the plant age, some other method must be sought after to count the age. This author noticed what is called "joint-tongue" the tongue-like part of triangle shape which remains at the base of the sheath of the fallen leaf. A fact was ascertained that when the number of the joint-ring coincides with that of the remaining joint-tongue, it exactly indicates the age of the plant.the plant.

• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.332-335
• /
• 2015

Taphrina wiesneri, a pathogen of cherry witches' broom, is highly pathogenic to Prunus yedoensis Matsumura which are widely planted in parks and streets in South Korea. In order to control the disease, it is crucial to know the life cycle of the fungus. We attempted to detect the fungus tentatively overwintering in shoots and branches of cherry trees both having witches' broom and healthy before flowering and leafing in spring using PCR with species-specific primer set (TwITSF and TwITSR). Genomic DNAs were extracted from the symptomatic and the asymptomatic shoots or branches. Results indicated that T. wiesneri is present in leaf buds and inner bark not only in symptomatic branches but also in the asymptomatic branches in diseased trees. However, the fungus was not detected in flower buds of the symptomatic trees and any samples of healthy trees.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1119-1122
• /
• 2006

Ten species of Lycoris was selected for establishment of phylogenetic relationships using random amplified polymorphic DNA (RAPD) analysis, the native distribution and flowering characterestics. On the basis of the dendrogram constructed with the similarity coefficients, 10 Lycoris species were divided into two clusters. L. sprengeri and L. incannta were showed very high similarity in the RAPD analysis, same flowering time and flower color as pink. The leaf of L. squamigera. L. sanguinea, L. koreana, L. sprengeri and L. incanata emergenced in spring. The L. squamigera and L. sanguinea were showed high similarity in same cluster. Also L. koreana, L. sprengeri and L. incanata were showed high similarity in same cluster. The flower of L. radiata, L. radiata var pumila, L. albiflora and L. traubii was spider. These species was showed very low similarity in another Lycoris species.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.5
• /
• pp.10-18
• /
• 2005

The research was carried out to define the morphological and growth characteristics of Poa pratensis L.(Kentucky bluegrass) 'Sewon' in native to Korea. Poa pratensis 'Sewon' was collected at the terrace land on the river in Guiman-ri, Cheongcheon-myeon, Goesan-gun, Chungcheongbuk-do on May 5, 1995. The collected Poa pratensis 'Sewon' was grown under non-mowing naturally growing condition. The morphological characteristics of Poa pratensis 'Sewon' are as follows. : The height of plant was 21.6cm but was increased to 33cm at the flowering time. The height of first node from the base was 5.0cm and the length and width of leaf were 9.6cm and 4.1cm, respectively. The length of inflorecences was 37.8cm and the length of a spike was 7.3cm. Based on these morphological characteristics, Poa pratensis 'Sewon' was defined to dwarf~medium and coarse texture type Kennturky bluegrass. 1 to 9 scale of visual quality, visual color and visual density were measured. Poa pratensis 'Sewon' showed best turf qualities among native Kentucky bluegrasses. In spring and fall growing season, Poa pratensis 'Sewon' were measured to be excellent performances for turf qulities similar to foreign excellent quality cultivars such as Midnight, Nuglade and Brilliant Kentucky bluegrasses. But turf quality of Poa pratensis 'Sewon' decreased by plant disease according to temperature increase in summe compared to foreign excellent quality cultivars. So, Poa pratensis 'Sewon' should be improved of disease tolerent quality by incessant breeding work in order to compete foreign excellent quality cultivars.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.38-49
• /
• 2013

Prohexadione-calcium (Pro-Ca), ethephon and transient water stress were evaluated in a factorial design, as potential inhibitors of early-season shoot growth of high density orchard management of apple (Malus domestica Borkh.) trees. In the experiment, water stress was imposed to one-half of the 7-year-old 'Golden Delicious'/M.9 apple trees in each of 5 blocks, by stopping irrigation for 3 weeks between 35 and 56 days after full bloom (AFB). Within each whole unit, the following Pro-Ca and ethephon treatments were randomly allocated at $2{\times}2$ factorial: a) 0 or 250 $mg{\cdot}L^{-1}$ a.i. Pro-Ca applied at 28 days AFB and b) 0 or 300 $mg{\cdot}L^{-1}$ a.i. ethephon applied twice (35 and 71 days AFB). All trees were hand thinned to king flowers prior to treatments. Vegetative shoot growth was markedly reduced by Pro-Ca, with its effect being obvious within 14 days after application, while ethephon and water stress treatments were less effective. Pro-Ca had no effect on fruit set and yield but slightly increased fruit size. Ethephon substantially reduced the fruit size and yield but had no effect on fruit set. Water stress reduced fruit set, fruit size and yield. With regard to fruit quality, Pro-Ca did not influence fruit shape, flesh firmness and soluble solids contents (SSC) but slightly reduced titratable acidity. Ethephon had no effect on fruit shape but increased firmness, SSC and acidity, while water stress did not influence these fruit quality attributes. Dry weight of dormant spur buds was reduced by both Pro-Ca and water stress, while increased by ethephon. The larger dormant buds led to the larger spur flowers at the tight cluster stage the following spring. Return flowering was promoted only by ethephon, especially on previous season's shoots. There were no significant interactions between Pro-Ca and ethephon or water stress on most variables observed in this study.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.55-60
• /
• 2019

Smart-phone in the recently released high-end applied to the camera module is equipped with the most features auto focusing camera module. Also, auto focusing camera module is divided into voice coil motor, encoder, and piezo according to type of motion mechanism. Auto focusing camera module is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. VCM actuator is made of magnet, yoke as a metal, and coil as a copper wire. Recently, the assembly as yoke and magnet is made by human resources. These process has a long process time and it is difficult to secure quality. Also, These process is not economical in cost, and productivity is reduced. Therefore, an automatic assembly as yoke and magnet is needed in the present process. In this paper, we have developed an automatic assembly device that can automatically assemble yoke and magnet, and performed verifying performance. Therefore, by using the developed automatic assembly device, it is possible to increase the productivity and reduce the production cost.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.662-667
• /
• 2021

Vibrotactile feedback is a major function of the latest touch displays, which greatly improves the user's operability and immersion when interacting with the interface on the screen. In this study, we propose a vibrotactile actuator suitable for mounting on the back side of a mid- to large-sized display because it can generate a strong vibration output by applying an electrostatic force-based mechanism and can be manufactured in a thin flat panel type. The proposed actuator was developed in a structure capable of amplifying the vibration force by alternating up and down with electrostatic force by the upper and lower electrodes that are spaced apart from the electrically grounded mass suspended from a radial leaf spring. As a result of the performance evaluation, the developed bar-type module with two built-in actuators showed excellent vibration output of up to 3.3 g at 170 Hz, confirming the possibility of providing haptic feedback in medium and large touch displays.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.171-176
• /
• 2021

Die-to-wafer (D2W) hybrid bonding in the multilayer semiconductor manufacturing process is one of wafer direct bonding, and various studies are being conducted around the world. A noteworthy point in the current die-to-wafer process is that a lot of voids occur on the bonding surface of the die during bonding. In this study, as a suggested method for removing voids generated during the D2W hybrid bonding process, a flexible mechanism for implementing convex for die bonding to be applied to the bond head is proposed. In addition, modeling of flexible mechanisms, analysis/design/control/evaluation of static/dynamics properties are performed. The proposed system was controlled by capacitive sensor (lion precision, CPL 290), piezo actuator (P-888,91), and dSpace. This flexure mechanism implemented a working range of 200 ㎛, resolution(3σ) of 7.276nm, Inposition(3σ) of 3.503nm, settling time(2%) of 500.133ms by applying a reverse bridge type mechanism and leaf spring guide, and at the same time realized a maximum step difference of 6 ㎛ between die edge and center. The results of this study are applied to the D2W hybrid bonding process and are expected to bring about an effect of increasing semiconductor yield through void removal. In addition, it is expected that it can be utilized as a system that meets the convex variable amount required for each device by adjusting the elongation amount of the piezo actuator coupled to the flexible mechanism in a precise unit.