• 한국연초학회지
• /
• 제16권2호
• /
• pp.152-162
• /
• 1994

This study was designed to establish an analytical method for the properties of leaf tobacco smoke. Lyophilized TPM from leaf tobacco smoke was extracted with MeOH, dried under reduced pressure, and trimethyl-silylated(TMS). Gas chromatography of the material using SPB-5 column showed 120 quantifiable peaks. Among those, 26 compounds including a hydrocarbons, Neophytadiene. and Levulinic acid could be identified through GC-MS. Smoke properties of 5 manufacturing grades and 2 oriental cultivars of domestic and imported leaf tobacco including AB3O-1 were analyzed. For flue-cured tobacco, content of the compounds in the smoke was generally higher in American leaf tobacco except for glycerol compounds. For burley tobacco, domestic leaves were found to have much higher amount of smoke compound than imported leaves. Among oriental tobacco, Izmir contained slightly higher amount of smoke compounds than Basma. Key words : GC - profile. TPM. TMS. Leaf tobacco.

• 한국의학물리학회지:의학물리
• /
• 제15권1호
• /
• pp.17-22
• /
• 2004

Multileaf collimator (MLC) is now rapidly replacing the lead ahoy block to shape the radiation treatment field. In addition to its defect of rectangular field shaping and increased penumbra width, it has another possible problem, and that is of radiation transmission between leaves, which needs to be maintained at as low a level as is permissible. The authors measured and analyzed the inter-leaf and cross-leaf transmissions of MLC by Varian Associates Inc, before its clinical application. The inter-leaf and cross-leaf transmissions were calculated by comparing the measured point doses in the polystyrene phantom in the open field and in a total closure of MLC. The beam profile of the inter-leaf and cross-leaf transmissions were depicted by using a water phantom. A photon beam of 6 MV was used in the measurement. The inter-leaf transmission was 1.63∼1.67%, indicating that the shielding effect of MLC is excellent. However, the cross-leaf transmission in the central area was 18.4∼18.7% and this is well over the clinically acceptable limitation of 5%. The beam profile of cross-leaf transmission displayed 80∼90% transmission near the field edge, so that the cross-leaf transmission was 14∼17% in this area. The multileaf collimator has an excellent shi디ding effect and the inter-leaf transmission is negligible so that it can be used in clinic as a good replacement of the conventional lead alloy block. However, care must be taken to avoid the cross-leaf transmission in the radiation field.

• 한국식품조리과학회지
• /
• 제31권3호
• /
• pp.335-343
• /
• 2015

The aim of this investigation was to examine the antioxidation, physicochemical, and sensory activity of a Korean steamed-rice cake, Sulgidduk, fortified with water extracts from Moringa oleifera (M. oleifera) leaf. M. oleifera leaf extracts were added to rice powder at rations of 0.1%, 1% and 10%. To examine antioxidation properties, the scavenging activities of DPPH radicals, hydroxyl radicals, ABTS+ radicals, and ferric ion reducing antioxidant power were investigated. M. oleifera extracts significantly increased the antioxidation activities of Sulgidduk in a dose dependent manner (p<0.05). Physicochemical characteristics were measured by proximate composition, color, texture profile analysis, and sensory evaluations. As the concentration of M. oleifera leaf extracts increased, L-values and a-values significantly decreased while b-values increased. Texture profile analysis demonstrated that the control groups showed significantly higher values for hardness, cohesiveness, chewiness, and adhesiveness as compared with groups containing M. oleifera leaf extract (p<0.05). In the sensory evaluation, the sample containing 0.1% of M. oleifera leaf extract obtained the best results in overall preference. Taken together, these results suggest that M. oleifera leaf may have the potential to increase the consumer acceptability and the functionality of Sulgidduk.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.229-235
• /
• 1996

The tapered leaf spring is regarded as the adequate tool to improve ride quality and to reduce vehicle weight of commercial vehicles. These effects are due to minimizing the contact area of each leaf by reducing the number of leaves and by optimizing the thickness profile of each leaf. But in adapting the tapered leaf spring to improve ride quality, we often have some problems of bad pitching and bouncing motion. This paper shows the basic properties of tapered leaf spring by rig tests and how to improve ride quality of a vehicle with tapered leaf springs, compared with multi-leaf spring. From the results of vehicle tests and rig tests it is concluded that the ride quality was effected by the dynamic spring rate and the friction of the tapered leaf spring.

• 생약학회지
• /
• 제20권4호
• /
• pp.205-214
• /
• 1989

The sensing of odour compounds in gas phase is an attractive target in recent sensor technology. Based on the finding that a plant leaf can respond to various gas molecules by changing its potential, biosensing system using a plant leaf has been investigated for the detection of odour compounds. A leaf of some plant species responded to odour compounds directly by changing its potential $5{\sim}10\;mV$. That the leaf was actually sensing an odour was much more remarkably detected from the difference between the response profile to pure $CO_2$ gas and that to $CO_2$ gas containing odour compounds. Then the quantitative study (ppb level) is now being performed on the response of a tobacco leaf to benzyl acetate; a component of jasminelike odours. The concept of biosensing and its significance are also described from the viewpoint of sensor technology.

• Journal of Ginseng Research
• /
• 제38권1호
• /
• pp.66-72
• /
• 2014

Panax ginseng is one of the most important medicinal plants in Asia. Triterpene saponins, known as ginsenosides, are the major pharmacological compounds in P. ginseng. The present study was conducted to evaluate the changes in ginsenoside composition according to the foliation stage of P. ginseng cultured in a hydroponic system. Among the three tested growth stages (closed, intermediate, and opened), the highest amount of total ginsenoside in the main and fine roots was in the intermediate stage. In the leaves, the highest amount of total ginsenoside was in the opened stage. The total ginsenoside content of the ginseng leaf was markedly increased in the transition from the closed to intermediate stage, and increased more slowly from the intermediate to opened leaf stage, suggesting active biosynthesis of ginsenosides in the leaf. Conversely, the total ginsenoside content of the main and fine roots decreased from the intermediate to opened leaf stage. This suggests movement of ginsenosides during foliation from the root to the leaf, or vice versa. The difference in the composition of ginsenosides between the leaf and root in each stage of foliation suggests that the ginsenoside profile is affected by foliation stage, and this profile differs in each organ of the plant. These results suggest that protopanaxadiol- and protopanaxatriol(PPT)-type ginsenosides are produced according to growth stage to meet different needs in the growth and defense of ginseng. The higher content of PPT-type ginsenosides in leaves could be related to the positive correlation between light and PPT-type ginsenosides.

• 동아시아식생활학회지
• /
• 제23권5호
• /
• pp.597-604
• /
• 2013

This study was conducted to investigate the effect of mulberry leaf powder on the antioxidant activity and the quality characteristics of maejakgwa (a Korean traditional cookie). Maejakgwa was prepared with different amounts of mulberry leaf powder (in ratios of 0, 3, 6, 9 and 12% to the flour quantity). The antioxidant activity was estimated by DPPH free radical scavenging activity and the total phenol content in mulberry leaf powder and maejakgwa. For analyzing the quality characteristics, bulk density and the pH of the dough, moisture contents, color, texture profile analysis and sensory evaluations were measured. The total phenol contents, DPPH free radical scavenging activity, bulk density of the batter and the a values of maejakgwa significantly increased with increasing mulberry leaf powder, whereas the pH of the batter, L values and b values of the maejakgwa significantly decreased with increasing mulberry leaf powder content. Finally, the results of the acceptance test indicated that maejakgwa containing 6% mulberry leaf powder had the highest scores. From these results, we suggest that mulberry leaf is a good ingredient for increasing consumer acceptability as well as the functionality of maejakgwa.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.270-276
• /
• 2005

This paper develops the flexible computational model of a heavy truck by interfacing the frame modeled as a flexible body to the heavy truck's computational model composed of rigid bodies. The frame is modeled by the finite element method. Three torsional modes and three bending modes of the frame are considered for the interface of the heavy truck's computational model. The actual vehicle test is conducted off road with a velocity of 20km/h. The vertical accelerations at the cab and front axle are measured in the test. For the verification of the developed computational model, the measured vertical acceleration profiles are compared with the simulation results of the heavy truck's flexible computational model. E grade irregular road profile of ISO is used as an excitation input in the simulation. The verified flexible computational model is used to compare the vibration characteristics of a front suspension system having a multi-leaf spring and that having a tapered leaf spring. The comparison results show that the front suspension having a tapered leaf spring has a higher vertical acceleration at the front axle but a lower vertical acceleration at the cab than the suspension system having a multi-leaf spring.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.56-61
• /
• 2003

This paper described about on-machine profile measurement of aspheric surfaces using contact probing technique in ultra precision machine. A contact probe has been designed as a sensing device to obtain measuring resolutions in nanometer regime using a circle leaf spring mechanism and a capacitive-type sensor. The contact probe which is installed on the z-axis is In touch with the aspheric objects which is fixed on the spindle of the diamond turning machine(DTM) during the measuring procedure. The x, z-axis motions of the machine are monitored by a set of two orthogonal plane mirror type laser interferometers. As a results, the developed contact probe on-machine measurement system showed 10 nanometers repeatability with a ${\pm}2{\sigma}$ and uncertainty of 200 nmPv.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.603-606
• /
• 2000

This dissertation is concerned with ultra-precision profile measurement of aspheric surfaces using contact probing technique. A contact probe has been designed as a sensing device to obtain measuring resolutions in nanometer regime utilizing a leaf spring mechanism and a capacitive-type sensor. The contact probe is attached on the z-axis during measurement while aspheric objects are supported on an precision xy-stage whose lateral motions are monitored by a set of two orthogonal plane mirror type laser interferometers. Experimental results show that the contact probing technique developed in this investigation is capable of providing a repeatability of 50 nanometers with a $\pm$3$\sigma$ uncertainty of 300 nanometers. Thermal disturbance is found the most significant factor that should be precisely controlled for accurate measurement.