• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.166-172
• /
• 2022

This study evaluated the migrant and residue tests of lead (Pb), cadmium (Cd), nickel (Ni), arsenic (As), and antimony (Sb) in 70 tumbler samples. The migration levels of hazardous metals in all the samples were within the migration limits outlined in the Korean standards and specifications for utensils, containers, and packages. Moreover, in all the tumbler samples, only Ni was detected in 0.5% citric acid solution of a food stimulant. The maximum level of Ni 0.0144 mg/L was 14.4% of the migrant specification (not more than 0.1 mg/L), which was relatively safe. The 0.5% citric acid solution was eluted at 4℃, 70℃, and 100℃ for 30 min, and only Ni was detected while testing for migration levels according to the temperature variations; all temperature conditions conformed to the standards. The level of Ni migration increased significantly with increasing migration temperature. Regarding the residue level outside the paint-coated tumbler samples, the Pb level was found to range from N.D. to 20638.1323 mg/kg. The risk of Ni was further estimated to be at a safe level of 0.00 to 0.01% compared to the %TDI as a result.

• Conservation Science in Museum
• /
• v.29
• /
• pp.133-152
• /
• 2023

This study references preceding studies to examine the history of paint application techniques using various paints in the past, with the aim to contribute to the long-term preservation of large military cultural heritage assets situated outdoors. To this end, the study compared the findings of preceding research with the findings of an analysis conducted on a H-13 helicopter housed at the War Memorial of Korea. Upon collecting and analyzing samples from three grounded WWII aircraft from above-ground by preceding studies, it was confirmed from each sample that the various chemical properties of chrome ensured the effectiveness of the protective coating. The compound was first tested as a corrosion-inhibiting pigment in the early 1940s and proved its excellent moisture-resistant properties over the course of 80 years, despite the deterioration of the paint layer and long-term exposure to the natural environment. For this reason, it has been widely used as a corrosion inhibitor for aluminum alloys in the aviation industry. In other word, the most widely-used material for preventing corrosion was an organic primer containing chromate. In this study, based on the paint analysis of a H-13 helicopter operated in the Korean War, it was shown that the second layer, consisting of the primer, contains chromium oxide (Cr₂O₃). In addition, it was estimated that red lead tetraoxide (Pb₃O₄) was used for the vehicle. Analysis results and data from previous studies can help to confirm the continued effectiveness of corrosion prevention function provided by chromate. Meanwhile, the result of infrared spectroscopy analysis confirmed the use of alkyd resin. In the future, comparisons with a more diverse range of artifacts will allow the identification of changes in the manufacturing technology of paints used to protect alloys from corrosion.

• 한국노년학
• /
• v.25 no.2
• /
• pp.1-14
• /
• 2005

Objectives. The purpose of this study is to analyze the social-environment factors by region for cause of death elderly people in Korea and to study the factors of longevity. Methods. The study included 16 regions with a total of 177,585 elderly peoples. The data in this study was collected from The National Statistical Office, Republic of Korea. Results. Those regions the highest cerebrovascular disease were Incheon County in that order. The correlation of social-environment by cause of death factors were divorce (+0.832), air pollution of Pb ; lead (+0.879), smoking (+0.895), fatness (+0.666), local tax revenue (+0.756), air pollution of SO2 (+0.602) and dirt road (+0.863). Conclusions. We should learn to live long and healthily from residence harmonized with natural environment. Longevity of elderly peoples is to be fostered for the promotion of health by control the social-environment factors.

• Conservation Science in Museum
• /
• v.30
• /
• pp.23-46
• /
• 2023

The Jija Chongtong Gun, owned by Seokdang Museum of Dong-A University, is a tubedstyle heavy weapon of the battlefield in the mid-Joseon Dynasty and is the second largest firearm after Cheonja Chongtong. The original surface color of the Jija Chongtong Gun was obscured by foreign substances and therefore it was judged that its condition requires the conservation treatment. For stable conservation treatment, gamma ray and X-ray non-destructive transmission surveys was conducted to determine the internal structure and conservation condition. And the component analysis on the material components and surface contaminants of Jija Chongtong Gun was conducted by utilizing the p-XRF component analysis, SEM-EDS component analysis, and XRD analysis. As a result of the gamma-ray and X-ray non-destructive transmission investigation, a large amount of air bubbles was observed inside Jija Chongtong Gun, and the part that appeared to be a chaplet by visual observation was not identified. As a result of gamma-ray and p-XRF component analysis, it was confirmed that Jija Chongtong Gun was bronze made of copper (Cu), tin (Sn), and lead (Pb) alloy. As a result of surface analysis of foreign substances using SEM-EDS, it was confirmed that the main components of white foreign substances were calcium (Ca), sulfur (S), and titanium (Ti). Titanium was presumed to be titanium dioxide (TiO₂), the main component of white correction fluid. The red foreign substance was confirmed to contain barium (Ba) as its main ingredient, and was presumed to be barium sulfate (BaSO₄), an extender pigment in paint. White and red contaminants, mainly composed of titanium and barium, are presumed to have been deposited on the surface in recent years. The yellow foreign substances were confirmed to be aluminum (Al) and silicon (Si), and were presumed to have originated from soil components. As a result of SEM-EDS and XRD component analysis, the white foreign substance was confirmed to be gypsum (CaS). Based on the results of component analysis, surface impurities were removed, stabilization treatment, and strengthening treatment were performed. During the conservation process, unknown inscriptions Woo (右), Byeong (兵), Sang (上), and Yi (二) were discovered through a portable microscope and precise 3D scanning. In addition, the carving method, depth, and width of the inscription were measured. Woo Byeong Sang is located above Happo Fortress in Changwon, and Yi can be identified as the second hill.

• Journal of Food Hygiene and Safety
• /
• v.39 no.3
• /
• pp.250-259
• /
• 2024

In this study, we investigated in pesticide residues and heavy metals in fermented liquor products (wine, beer, makgeolli). Targeted analysis of 400 pesticide residues in the sample was performed using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method, followed by gas chromatography-tandem mass spectrometry (MS/MS) and LC-MS/MS. The contents of heavy metals (Pb, Cd) were determined by ICP-MS using the microwave method. The mercury was measured using a mercury analyzer. From the analysis of 150 cases, 102 (68.0%) cases of fermented liquor were detected, and 35 pesticide residues (including metalaxyl, mandipropamid, azoxystrobin, and fenhexamid) were detected among the 400 pesticide residues tested. Pb, Cd, and Hg were tested in 150 samples. Lead was detected in 73 samples (48.7%), cadmium in 9 samples (6.0%), and mercury in 36 samples (24.0%). Exposure assessment was conducted to determine the safety of the detected pesticide residues and heavy metals. According to this assessment, the pesticide residues and heavy metals showed very low %ADI values (less than 1%).

• Economic and Environmental Geology
• /
• v.2 no.4
• /
• pp.23-71
• /
• 1969

Sediment samples were taken at about half-mile intervals from all the inajor rivers draining the St. Austell granite mass. The minus 80 mesh(B.S.S.) fraction of each sample was analysed, using semiquantitative methods, for sodium, potassium, lithium, phosphorus, nickel, chromium, tin, tungsten, arsenic copper, zinc and lead. The work was carried out with the view to gaining further information as to the geographical distribution of such different granite facies as might axist, and to investigate the geochemical dispersion of these elements with relation to mineralisation in this area. The sesults confirm Exley's suggestion that the mass consists of two major granite intrusions, the earlier undifferentiated one is joined on the west by a later differentiated intrutive. During the work grid deviation maps proved particularly useful in obtaining data concerning the nature of the granite but frequency diagrams were not particularly helpful. All the known lode areas were associated with stream sediments containing anomalously high concentrations of lode metals and it is concluded that these high concentrations are due premarily to lode material transferred to the streams in the form of tailings lost during milling operations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.72-77
• /
• 1994

This study was conducted to investigate the influence of treatment of fly ash on heavy metal contents of the arable soil. Rice was cultivated on the two types of paddy field clay loam and sandy loam with 0, 12ton/10a of anthracite fly ash and bituminous coal fly ash application. And soybean was cultivated at the same type of upland fields with those ashes of 0, 9ton/10a, yearly for three years. At the harvest time, the heavy metal contents in the different layer were investigated. The results were summarized as follows : 1. The contents of some heavy metal were increased in the surface soils but didn't show the tendency in the deeper layer or soil texture. 2. In the paddy fields, the contents of Cd, Cu, Zn, Cr were increased. Meanwhile and the upland fields, the contents of Cd and Cr were increased with the successive application of Anthracite fly ash, but the others didn't show those tendency. 3. The contents of Cd, Cu and Zn in the paddy field, were increased but the upland field, the contents of Cd, Cr and Ni were increased by the successive application of bituminous coal fly ash.

• Conservation Science in Museum
• /
• v.15
• /
• pp.78-95
• /
• 2014

To examine the materials, production techniques, and key features of Goryeo wooden lacquerwares, scientific analysis was conducted on six relevant lacquerware items. All of the items, except for a lacquered bowl ^{duksu 4123}, were found to have been made by first covering the surface of the wood with cloth and then varnishing with lacquer. The wooden frames of flower-shaped lacquered case and pine leaves shape lacquered case were made by wrapping thin wood around either the lid or bottom panel. In most cases, microscopic analysis revealed a lower layer of lacquer mixed with bone ash and bone dust, followed by an upper varnish layer of lacquer. SEM-EDS analysis and μ-XRF ^{Micro-X-ray Fluorescence} analysis showed that vermilion lacquer mixed with cinnabar was used on the surface. A lid decorated with a dot pattern was made by first varnishing the surface with yellow lacquer mixed with orpiment, and then irregular dot pattern with a mixture of black lacquer and soot. The vermilion lacquer used to varnish the side of the lacquered bowls was composed of lacquer mixed with cinnabar and minium ^{Red Lead}.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.853-859
• /
• 2009

Endometriosis becomes the most common cause of pelvic pain and infertility women. The cause of endometriosis has ever been entirely proven. However, an increased use of commercial feminine hygiene products such as tampons and sanitary napkins was considered one of the major affect. Harmful substances in feminine hygiene products was analyzed and evaluated. Samples of commercial products obtained from Korea, Japan, America, Germany, and China were analyzed for six hazardous inorganic elements (chromium, cobalt, nickel, copper, cadmium and lead). In the extractable heavy metals of napkins, Cr, Ni and Cu were found in all of the samples, while Cd was detected only in two samples. In the tampons, Cr, Ni and Cu were found in all of the samples. The presence of Co and Cd was not detected in all samples The concentrations of extractable heavy metals in the tampons were lower than those in the sanitary napkins. The content of extractable heavy metals in the sanitary products was compared with the criteria of the 100 $\ddot{O}KO$ TEX Standard. It was confirmed that the level of heavy metals in the sanitary products posed no serious risk to health, based on the human-ecological criteria defined by the 100 $\ddot{O}KO$ TEX Standard.

• Journal of the Korean earth science society
• /
• v.24 no.7
• /
• pp.635-649
• /
• 2003

Heavy metal concentrations and benthic foraminiferal distributions were investigated in three short sediment cores in order to understand the pollution history in Masan Bay. Sedimentation rates were 0.33 cm/yr, 0.20 cm/yr and 0.33 cm/yr in the inner bay, the out fall of Dugdong sewage disposal plant, and bay mouth, respectively. The rapid increases of copper, zinc and lead concentrations at the core depth of 10 cm the upper part indicated that Masan Bay has been polluted with industrial wastes since the 1940s. Benthic foraminifera in core sediments show that the variations in their distribution were followed by industrial pollution in the bay. The number of individuals and species diversity decreased, whereas agglutinated tests increased upward in the cores with increased heavy metal pollution. These shifts effectd the abundance of few tolerant forms and consequently decreased the species diversity. The opportunistic species Eggerella advena and Trochammina pacifica increased in polluted sediments. These species can be used as an indicator for assessments of environmental quality in Masan Bay.