• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3750-3757
• /
• 2024

Rapidly obtaining the coverage characteristics of leaching solution in In-situ Leaching Area of Sandstone Uranium Mines is a necessary condition for optimizing well locations reasonably. In the presented study, the improved algorithm of the Fast Marching Method (FMM) was studied for rapidly solving coverage characteristics to replace the groundwater numerical simulator. First, the effectiveness of the FMM was verified by simulating diffusion characteristics of the leaching solution in In-situ Leaching Area. Second, based on the radial flow pressure equation and the interaction mechanism of the front diffusion of production and injection well flow field, an improved FMM which is suitable for In-situ Leaching Mining, was developed to achieve the co-simulation of production and injection well. Finally, the improved algorithm was applied to engineering practice to guide the design and production. The results show that the improved algorithm can efficiently solve the coverage characteristics of leaching solution, which is consistent with those obtained from traditional numerical simulators. In engineering practice, the improved FMM can be used to rapidly analyze the leaching process, delineate Leaching Blind Spots, and evaluate the rationality of well pattern layout. Furthermore, it can help to achieve iterative optimization and rapid decision-making of production and injection well locations under largescale mining area models.

• 한국분말재료학회지
• /
• 제10권5호
• /
• pp.305-309
• /
• 2003

We report on the formation and chemical leaching of non-equilibrium $Al_{0.6}(Fe_{75}Co_{25})$ alloy produced by rod milling. X-ray diffractometry, transmission electron microscopy, differential scanning calorimetry, scanning electron microscopy, and vibrating sample magnetometry were used to characterize the as-milled and leached specimens. After 400 h, only the $Al_{0.4}Fe_{0.6}$ peak of the body-centered cubic type was present in the XRD pattern. The entire rod milling process could be divided into three different stages of milling: agglomeration, disintegration, and homogenization. The saturation magnetization, $M_s$ decreased with increased milling time, the $M_s$ of the powders before milling was about 113.8 emu/g, the $M_s$ after milling for 400 h was about 11.55 emu/g. Leaching of the Al in KOH of the Al at room temperature from the as-milled powders did not induce any significant change in the diffraction pattern. After the leached specimen had been annealed at $600^{\circ}C$ for 1 hour, the nanoscale crystalline phases were transformed into the bcc Fe, cubic Co, and $CoFe_2O_4$ phases. On cooling the specimen from 85$0^{\circ}C$, the degree of magnetization increased slightly, then increased sharply at approximately 364.8$^{\circ}C$, indicating that the bcc $Al_{0.4}Fe_{0.6}$ phase had been transformed to the Fe and Co phases.

• Journal of Forest and Environmental Science
• /
• 제30권2호
• /
• pp.208-217
• /
• 2014

Leaf litter is the main and quick source of organic matter and nutrient to the soil compared to other parts of litter. This study focused on the nutrients (N, P and K) leaching from leaf litter of Melia azadirachta, Azadirachta indica, Eucalyptus camaldulensis, Swietenia macrophylla, Mangifera indica, Zizyphus jujuba, Litchi chinensis, Albizia saman, Artocarpus heterophyllus, Acacia auriculiformis, Dalbergia sissoo and Khaya anthotheca as the common cropland agroforest tree species of Bangladesh. About (9 to 35) % of initial mass was lost, while Electric Conductivity (EC) and TDS (Total Dissolved Solid) of leaching water increased to (573 to 3,247) ${\mu}S/cm$ and (401 to 2,307) mg/l respectively after 192 hours of leaching process. Mass loss (%) of leaf litter, EC and TDS of leaching water showed significant (ANOVA, p<0.05) curvilinear relationship with leaching time. Initial concentration of NH4, PO4 and K in leaching water was found to increase significantly (p<0.05) up to 48/72 hours and then remained almost constant at later stages (48/72 to 192 hours). Mass loss of leaves; EC, TDS, $NH_4$, $PO_4$ and K in leaching water was varied also significantly (ANOVA, p<0.05) among the studied tree species. All the tree species showed similar pattern of nutrients (K>N>P) release during the leaching process. The highest $NH_4$ (4,097 ppm) and potassium (8,904 ppm) concentration was found for M. azadirachta while the highest $PO_4$ (1,331 ppm) concentration was found for E. camaldulensis in the leaching water. Among the studied tree species, M. azadirachta, A. indica, D. sissoo, E. camaldulensis and Z. jujuba was selected as the best tree species with respect to nutrient leaching.

• 한국환경농학회지
• /
• 제37권3호
• /
• pp.166-171
• /
• 2018

중량식 라이시미터를 활용하여 배추 재배 중 식양토와 사양토의 질소 용탈과 질소 수지를 평가하였다. 생육 초기인 9월 초 강우로 인해 식양토와 사양토 모두 토심 150 cm 이하로 배수가 있었다. 식양토는 점토의 수축 및 작물 뿌리 등에 의해 형성된 대공극을 통해 일시적으로 배수량이 증가하였으나, 사양토는 식양토와 달리 강우량에 따라 일정하게 배수량이 증가하고, 감소하였다. 토성별로 질소 용탈량을 분석한 결과, 식양토에서는 비료의 용탈이 거의 없는 반면, 사양토에서는 식양토에 비해 5배 많은 질소 용탈이 있었다. 질소수지에서 작물 흡수량에 비해 질소 용탈량이 차지하는 비율은 적었으나 식양토에 비해 사양토에서의 용탈량이 많아 질소 수지 산정에 토성에 따른 용탈특성을 고려할 필요가 있다.

• 농업과학연구
• /
• 제49권2호
• /
• pp.379-387
• /
• 2022

A large amount of the mineral nitrogen is necessary for crop growth. With the use of nitrogen fertilizers, agricultural yield has increased during the last few decades. However, at the same time, nitrate from the cultivated land can be a source of environmental pollution, especially in water systems. For nitrogen management, it is necessary to analyze the pattern of nitrogen movement in soil. In this study, nitrogen leaching in upland soils was evaluated using undisturbed lysimeters with different soil textures during sesame cultivation. The soil texture of the lysimeters was clay loam (Songjung series) and sandy loam (Sangju series) soils. Sesame was cultivated from May 25 to August 24 in 2020. The standard amount of NPK fertilizer (N-P₂O₅-K₂O = 2.9-3.1-3.2 kg·10 a^-1) was applied before sowing. The amount of nitrogen leaching was calculated by multiplying the nitrogen (NO₃-N + NH₄-N) concentration and the amount of water drained below 1.5 m soil depth. The water was drained through percolation into macropores in the clay loam lysimeter. In contrast, in the sandy loam lysimeter, water drained more slowly than in the clay loam lysimeter. There was a slight difference in the total amount of leachate during the cultivation period, but the amount of nitrogen leaching was high in sandy loam soil. During the sesame cultivation period, the amount of nitrogen leaching from clay soil was 5.64 kg·10 a^-1, and 10.70 kg·10 a^-1 for sandy soil. We found that there was a difference in leaching depending on the soil physical characteristics. Therefore, it is necessary to consider the characteristics of soil to evaluate the leaching of nitrogen.

• Applied Biological Chemistry
• /
• 제40권2호
• /
• pp.128-133
• /
• 1997

유기물 함량이 다른 두 종류의 토양을 선정하여 풍건한 조건, 유기물을 제거한 조건 및 유기물을 제거한 토양에 humic acid 또는 fulvic acid를 첨가한 세 가지 형태로 구분하여 살균제 fluazinam (3-chloro-N-(3-chloro-5-trifluoromethyl-2-pyridyl)-${\alpha},{\alpha},{\alpha}$-trifluoro-2,6-dinitro-${\rho}-toludine$)의 흡착, 탈착, 용탈 및 잔류량의 변화를 조사하였다. Fluazinam의 흡착양상은 Freundlich equation에 잘 부합되었다. 유기물을 제거한 토양에서 fluazinam의 흡착량 및 흡착강도는 유기물을 제거하지 않은 토양에 비하여 감소하였다. 유기물을 제거한 토양에 humic acid 또는 fulvic acid를 각각 2.0%또는 0.5%되게 첨가한 경우, 흡착량은 fulvic acid를 첨가한 토양에서 높게 나타났다. 유기물을 제거한 토양에 흡착된 fluazinam의 탈착율은 증가하였다. Soil column시험에서 토양표면에 처리된 fluazinam은 유출수에 의하여 용탈되지 않았으며, 대부분이 표토층 (5 cm)에 존재하였고 표층 15 cm 이하로는 이동되지 않았다. 토양중 fluazinam의 잔류량변화는 유기물 함량이 적은 토양 보다는 많은 토양에서, 살균조건의 토양보다는 비살균조건의 토양에서, 비담수토양 보다는 담수토양에서 빠르게 감소하였다.

• Advances in environmental research
• /
• 제3권4호
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.92-98
• /
• 1997

To make good use of chitosan forming complex with heavy metals in wood preservative treatment, woods impregnated with chitosan and copper sulfate were prepared. Amounts of leached copper, decay resistance, anti-mold efficacy, iron corrosion rates, moisture regain rates and degradation pattern in chitosan pre-treated and untreated wood were compared. After leaching test, amounts of leached copper from chitosan pre-treated wood had a much smaller than chitosan untreated wood, and good decay resistance was retained even after leaching test. From these results, it was proved that chitosan-copper complex formed in wood played and important role for decay durability. In chitosan pre-treated wood, damage values by test molds became remarkably smaller, but the growth of test molds was not perfectly inhibited. Distinct differences in iron corrosion rates between chitosan pre-treated and untreated woods was not recognized but chitosan pre-treated wood showed the lower moisture regain rates than chitosan untreated wood because of water insoluble chitosan membrane formed in wood. After leaching test, the tracheid walls in the wood treated with 2.0% copper sulfate only were eroded by the fungal attacks, but those in the wood pre-treated with chitosan remained almost intact.

• 자원리싸이클링
• /
• 제17권1호
• /
• pp.51-58
• /
• 2008

Cu-Ni-Co-Fe 함금상에 황의 원료로서 pyrite 또는 chalcopyrite를 첨가하여 매트상을 제조하는 방법에 대하여 검토하였다. 두 매트상 모두 주성분은 $(FeSi)_9S_8$, $CuFeS_2$, FeS, $Co_4S_3$, $Ni_3S_2$ 그리고 $Cu_2S$의 금속황화물 이었으며, chalcopyrite를 첨가한 매트의 경우 구리의 함량이 높아 $Cu_2S$의 피크가 더 높게 나타났다. 제조한 매트상의 침출 결과 모두 구리는 95%이상, 니켈과 코발트는 90% 이상의 침출율을 보였다. Pyrite와 chalcopyrite 첨가량이 증가할수록 침출액의 pH는 낮아지고, 용해되어 있는 철이온의 농도와 잔사량은 증가하였다. 한편 매트 중 황의 함량변화에 따른 유가금속의 침출율은 모든 시료에 대해 크게 변하지 않았으며, 다만 pyrite를 이용하여 제조한 매트의 경우에 Ni과 Co가 황 함량 증가에 따라 다소 증가하는 경향을 나타내었다.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.615-621
• /
• 1999

The new process in order to fabricate of Ni catalyst with high activity by the mechanochemical(MC) method which was combined the mechanical alloying(MA) and the chemical treatment process. The microstructure and characterization of mechanically alloyed Ni-5-wt% Al powder and Ni catalyst gained by alkali leaching were investigated byt he various analysis such as XRD, SEM-EDS, HRTEM and laser particle analyzer. The steady state powder with 1~2$\mu\textrm{m}$ mean particle size was obtained after 30hr milling with the PCA of 2 wt% stearic acid under the condition of grinding stainless steel ball to powder ratio of 60:1 and rotating speed fo 300rpm. According to result of HRTEM diffraction pattern, MA powder of the steady state was nanocrystalline $Al_3$$Ni_2$ intermetallic compound. Ni catalyst was obtained after KOH leaching of the steady state powder was about 20nm nanocrystalline which contained about 8 wt % Al.