• The Journal of Advanced Prosthodontics
• /
• 제6권4호
• /
• pp.295-301
• /
• 2014

PURPOSE. Numerous methods were used to etch the fiber posts to improve its bonding to root canal dentin. Our aim was to evaluate the efficacy of 37% phosphoric acid in etching fiber posts in comparison with 24% hydrogen peroxide. MATERIALS AND METHODS. Ninety human maxillary central incisors were taken and post space preparation was done. Ninety fiber posts were taken and divided into three groups (n=30) based on the surface treatment they received ($H_3PO_4$, $H_2O_2$, distilled water) and each group was further divided (n=10) based on the time period of application (15 seconds, 30 seconds, 60 seconds). All the posts were luted into canals using Rely X UniCem-2. Each tooth was then sectioned into six slices and subjected to push out test. Data obtained was subjected to statistical analysis at P<.05. The surface topography was evaluated using scanning electron microscopy. RESULTS. Highest bond strength values were noted in 15 seconds etched phosphoric acid group and 60 seconds etched hydrogen peroxide group with no significant difference between two groups. Surface topography revealed complete epoxy layer removal with no damage to its structural integrity in those groups. CONCLUSION. $H_3PO_4$ etching for a period of 15 seconds is an effective alternative in improving the adhesion of fiber post to root dentin.

• 대한공간정보학회지
• /
• 제14권2호
• /
• pp.43-53
• /
• 2006

1995년부터 국가GIS사업의 일환으로 지형공간정보의 효용성이 증대되고 있으며, 수치지형도는 행정, 실생활 그리고 산업전반에 걸쳐 다양한 목적으로 사용되고 있다. 하지만 실세계정보와 수치지형도 간에 차이가 발생되고 이를 갱신하기 위해서 많은 비용과 시간이 소요되기 때문에 도시 시설물 관리에 활용하는데 어려움이 있다. 따라서 본 연구에서는 3차원 정보를 직접 취득할 수 있고 정확도가 높은 LiDAR 자료와 디지털 항공영상을 연계하여 추출된 건물정보의 진위를 판단하고 기존의 수치지형도와 비교하여 건물정보를 추가 및 삭제함으로서 도시지역의 수치지형도 건물레이어를 갱신하는 방안을 제시하였다. 향 후 LiDAR 자료를 이용한 건물레이어생성 및 갱신의 자동화를 위해서 미소 및 수목폴리곤의 제거 및 건물진위판단 등에 대한 자동화기술이 추가적으로 연구되어야 할 것으로 판단된다.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.17-23
• /
• 2011

Active thin films are ubiquitous in the manufacture of all forms of flat panel display (FPD). One of the most widely employed thin films is indium tin oxide (ITO) and metal films used electrically conductive materials in display industries. ITO is widely used for fabrication of LCD, OLED device, and many kinds of optical applications because of transparency in visible range and its high conductivity and metal films are also widely employed as electrodes in various electric and display industries. It is important that removing specific area of layer, such as ITO or metal film on substrate, to fabricate and repair electrode in display industries. In this work, we demonstrate efficient selective ablation process to ITO and aluminum film on glass using a femtosecond laser (${\lambda}p=1025nm$) respectively. The femtosecond laser with wavelength of 1025nm, pulse duration of 400fs, and the repetition rate of 100kHz was used for selectively removing ITO and Al on glass in the air. We can successfully remove the ITO and Al films with various pulse energies using a femtosecond laser.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.230-233
• /
• 2008

The vanadium rich ash of petroleum coke can give a slagging problem during because of the high melting point of $V_2O_3$. For continuous removal of the slag, petroleum coke is often mixed with coal, and the viscosity of the mixed slag is an important property, determining the gasification temperature. The viscosities of the mixed slag from various mixing ratios of petroleum coke and a bituminous coal were investigated. When mixed with a crystalline coal slag, $T_{cv}$ was increased at a higher the coke content in the mixed feed. When the $V_2O_3$ concentration was greater than 4.5%, it was difficult to get accurate measurements of $T_{cv}$. The SEM/EDX analyses of the cooled slag revealed that the major crystalline phase was anorthite, and $T_{cv}$ should be related to the formation temperature of anorthite. The SEM/EDX analyses also showed that, at low concentrations of vanadium, part vanadium formed a crystalline phase with Al-Si-Ca-Fe, and the rest remained in the glassy phase, suggesting that vanadium existed as a slag component at the low viscosity region. At a high concentration, vanadium forms a phase with Ca, and the Ca-V phase was separated from the slag phase, and formed a layer above the slag. FeO in petroleum coke also played an important role determining viscosity: at high temperatures, increased FeO lowered the viscosity, but as it formed a spinel phase, the depletion of FeO in the slag resulted in a higher viscosity.

• 공업화학
• /
• 제23권5호
• /
• pp.445-449
• /
• 2012

고분자 전해질막 연료전지의 대량 생산을 위하여 막-전극 접합체(MEA) 활성화 방법의 개발이 중요한 현안이다. 현재 개발된 MEA활성화 방법은 시간이 많이 소요됨으로 인해 수소의 사용량 또한 증가하여 연료전지의 상용화에 큰 걸림돌이 되고 있다. 통상적인 활성화 방법은 활성화 원리를 주로 전해질 수화 관점에서 이해하였다. 반면, 본 논문에서 제안된 순환전압전류(cyclic voltammetry, CV) 활성화 방법은 전해질 및 촉매적 관점에서 별도로 분리하여 이해하였다. 따라서 전해질 관점에서는 상대 습도 100%인 가습된 질소를 공급하여 전극 및 막의 전해질을 수화시키는 과정으로 구성되고, 촉매적 관점에서는 CV 사이클을 수행하여 백금 촉매에 흡착되어 있는 불필요한 오염물질, 또는 산화피막을 제거하는 과정으로 수행된다. CV 활성화법은 2.5 h 내에 활성화가 종료되어 활성화 시간을 크게 단축시킬 수 있을 뿐만 아니라, 수소 사용량도 기존 활성화 방법에 비하여 1/4 이하로 감소시킬 수 있어서 효과적인 연료전지 활성화 방법으로 제안하고자 한다.

• 한국레이저가공학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2014

Indium tin oxide (ITO) is an important transparent conducting oxide (TCO). ITO films have been widely used as transparent electrodes in optoelectronic devices such as organic light-emitting devices (OLED) because of their high electrical conductivity and high transmission in the visible wavelength. Finding ways to control ITO micromachining depth is important role in the fabrication and assembly of display field. This study presented the depth control of ITO patterns on glass substrate using a femtosecond laser and slit. In the proposed approach, a gaussian beam was transformed into a quasi-flat top beam by slit. In addition, pattern of square type shaped by slit were fabricated on the surfaces of ITO films using femtosecond laser pulse irradiation, under 1030nm, single pulse. Using femtosecond laser and slit, we selectively controlled forming depth and removed the ITO thin films with thickness 145nm on glass substrates. In particular, we studied the effect of pulse number on the ablation of ITO. Clean removal of the ITO layer was observed when the 6 pulse number at $2.8TW/cm^2$. Furthermore, the morphologies and fabricated depth were characterized using a optical microscope, atomic force microscope (AFM), and energy dispersive X-ray spectroscopy (EDS).

• Applied Microscopy
• /
• 제42권2호
• /
• pp.95-103
• /
• 2012

연잎효과는 연꽃의 잎에서 규명된 현상으로 표피세포에서 기원하는 미세구조에 의해 물방울이 잎 표면이나 내부조직에 침투하지 않고 경사면으로 흘러내리며 표면 위 먼지나 이물질을 함께 떨어지게 한다. 잎 표면을 항상 깨끗한 상태로 유지하는 자기정화 능력인 연잎효과에 대해서는 여러 영역에서 연구되고 다방면으로 응용되고 있으나 구조적인 측면에서 연잎을 생장단계별 또는 표피조직 부위별로 비교 조사한 연구는 거의 없는 실정이다. 이에 본 연구에서는 연잎과 줄기를 대상으로 생장단계별, 부위별 표피조직의 미세 표면구조를 연구하여 연잎효과 표면 특성을 조사하였다. 본 연구에서 조사된 연잎효과는 미세돌기와 왁스결정체가 발달한 잎의 상피조직에서만 나타나고, 왁스결정체만 발달한 하피 및 줄기의 표피조직에서는 확인되지 않았다. 이는 미세돌기의 발달이 연잎효과를 나타내는데 가장 중요한 요인이고, 왁스결정체가 돌기표면 위에 축적되면 연잎효과는 더 증가하는 것으로 밝혀졌다.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.77-80
• /
• 2003

수용액 내에서 질화물 박막의 산화저항성 흡착 피막의 형성을 확인하기 위하여 Si$_3$N$_4$분말 표면의 glycine 흡착 거동을 조사하였다. 염기성분위기에서 glycine은 Si$_3$N$_4$ 분말 표면에 포화 흡착되었으며 이러한 흡착거동은 Si$_3$N$_4$ 박막의 경우에도 동일하게 일어날 것으로 예상되었다. Glycine을 첨가한 CeO$_2$ 슬러리를 제조하고 PH에 따른 Si$_3$N$_4$와 SiO$_2$ 박막의 연마시험을 수행하여 연마율은 감소하고 선택비는 증가하는 것을 확인하였다. 실험에서 얻은 최대 선택비는 pH=12에서 35 이상이었다. 이는 염기성 분위기에서 glycine이 해리하여 막 표면에 화학흡착하고 산화와 용해를 억제함으로써 연마율을 낮추고 선택비 향상에 기여하였기 때문으로 판단된다. 아미노산 계열의 첨가제를 CeO$_2$계 CMP용 슬러리에 적용하는 경우 산화물/질화물 박막의 선택비를 향상시키는데 효과적임을 확인하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.245-248
• /
• 2011

Many researches have been carried out to improve light absorption in the crystalline silicon solar cell fabrication. The rear reflection is applied to increase the path length of light, resulting in the light absorption enhancement and thus the efficiency improvement mainly due to increase in short circuit current. In this paper, we manufactured the silicon solar cell using the mono crystalline silicon wafers with $156{\times}156mm^2$, 0.5~3.0 ${\Omega}{\cdot}cm$ of resistivity and p-type. After saw damage removal, the dielectric film ($SiN_x$)on the back surface was deposited, followed by surface texturing in the KOH solution. It resulted in single-side texturing wafer. Then the dielectric film was removed in the HF solution. The silicon wafers were doped with phosphorus by $POCl_3$ with the sheet resistance 50 ${\Omega}/{\Box}$ and then the silicon nitride was deposited on the front surface by the PECVD with 80nm thickness. The electrodes were formed by screen-printing with Ag and Al paste for front and back surface, respectively. The reflectance and transmittance for the single-sided and double-sided textured wafers were compared. The double-sided textured wafer showed higher reflectance and lower transmittance at the long wavelength region, compared to single-sided. The completed crystalline silicon solar cells with different back surface texture showed the conversion efficiency of 17.4% for the single sided and 17.3% for the double sided. The efficiency improvement with single-sided textured solar cell resulted from reflectance increase on back surface and light absorption enhancement.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권1호
• /
• pp.19-33
• /
• 1997

The high oxidants, which occur the daily maximum concentrations in the afternoon, are transported into the other region via long range transport mechanisms or trapped within the shallow mixing boundary layer and then removed physically (deposition, transport by mountain wind, etc.) and chemically (reaction with local sources). Therefore, modeling formation of photochemical oxidants requires a complex description of both chemical and meteorological processes. In this study, as a part of air quality studies, we reviewed various aspects of photochemical modeling on the basis of currently available literature. The result of the review shows that the model is based on a set of coupled continuity equations describing advection, diffusion, transport, deposition, chemistry, emission. Also photochemical oxidant models require a large amount of input data concerned with all aspects of the ozone life cycle. First, emission inventories of hydrocarbon and nitrogen oxides, with appropriate spatial and temporal resolution. Second, chemical and photochemical data allowing the quantitative description of the formation of ozone and other photochemically-generated secondary pollutants. Third, dry deposition mechanisms particularly for ozone, PAN and hydrogen peroxide to account for their removal by absorption on the ground, crops, natural vegetation, man-made and water surfaces. Finally, meteorological data describing the transport of primary pollutants away from their sources and of secondary pollutants towards the sensitive receptors where environmental damage may occur. In order to improve our present study, shortcomings and limitation of existing models are pointed out and verification process through observation is emphasized.