$V_2O_5$ 박막에서의 PL 특성을 조사하기 위해 RF 스퍼터링법을 이용하여 비정질과 결정질 $V_2O_5$ 박막을 제작하였고, 10~300 K의 온도까지 PL 스펙트럼을 측정하였다. 상온에서 성장된 비정질 박막에서는 ~505 nm를 중심으로 하는 하나의 PL 피크만이 관찰되었고, 결정질 $V_2O_5$ 박막에서는 505 nm를 중심으로 하는 피크와 산소결함에 의한 것으로 알려진 ~695 nm를 중심으로 하는 피크가 관찰되었다. 비정질과 결정질 $V_2O_5$ 박막에서 관찰되는 505 nm에서의 PL 피크의 위치는 온도에 강한 의존성을 보였고, 그 값은 300 K에서 2.45 eV였고, 10 K에서 2.35 eV였다. 505 nm에서의 PL은 $V_2O_5$에서의 밴드 에너지 전이에 의한 것이었으며, 또한 온도의 감소에 따른 피크 위치 에너지의 감소는 전자-포논 상호작용의 감소에 의한 격자팽창효과의 감소 때문이었다.
AIN 소결에 있어서 ${Y_2}{O_3}$를 소결 조제로하여 $1,700{\sim}1,900^{\circ}C$의 온도에서 상압소결하엿을 때 ${Y_2}{O_3}$ 첨가와 소결 유지 시간이 소결 특성, 미세 구조 및 열전도도에 미치는 영향에 관하여 평가하였다. ${Y_2}{O_3}$의 첨가에 따라 AIN 시편은 치밀화가 증진되고 열전도도가 증가됨을 확인할 수 있었다. 이러한 결과는 AIN 분말 표면의 ${Al_2}{O_3}$와 ${Y_2}{O_3}$의 반응으로 형성된 이차상에 기인한 것으로, 첨가된 ${Y_2}{O_3}$는 ${Al_2}{O_3}$와의 반응으로 치밀화에 기여를 하여 고온에서 액상의 형성으로 급속히 치밀화를 증진시키며, AIN 결정격자 내부로 유입될 수 있는 산소의 양을 감소시킴으로써 AIN 시편의 열전도도를 증가시키는 것을 알 수 있었다. 또한 소결시간의 증가에 따라 열전도도는 급격히 증가하였는데 이는 결정립계의 이차상이 고온에서 휘발되어 그 양이 감소함에 기인하는 것으로 파악되었다. $1,900^{\circ}C$ 5시간 소결한 시편의 열전도도는 약 $141\;Wm^{-1}K^{-1}$ 값을 나타내었고 이는 1시간 소결한 시편과 비교하여 20% 이상 증가된 값이었다.
Si 기판 위에 $\alpha$-Fe$_2$O$_3$을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절, SEM, Mossbauer 분광법 및 VSM을 사용하여 연구하였다. $\alpha$-Fe$_2$O$_3$박막은 Si 기판위에 PLD를 이용하여 기판온도 400 $^{\circ}C$, 산소압력 0.1 Torr로 5분간 증착 하였고 그 위에 두께를 달리하여 Ba-ferrite 박막을 제조하였다. Ba-ferrite 결정은 가늘고 긴 모양의 결정립들로 형성되었으며 두께에 따라 그 모양과 상태가 변화하였다. Mossbauer 분광법으로부터 Ba-ferrite 결정내의 Fe 원자의 스핀 방향은 두께가 얇을수록 하지층의 영향으로 기판에 수직으로 정렬하려는 경향을 보이고 있음을 확인하였다. 자기이력곡선의 각형비 역시 두께가 얇을수록 더 크며 이러한 특성은 수평에 비하여 수직의 경우가 더 강하게 나타났다. 보자력 역시 같은 경향을 보이나 포화자화의 값은 수평의 경우에 더 큰 값을 나타내었다. 결정구조는 Magnetoplumbite로서 두께가 작아질수록 결정상수 $\alpha$는 감소하고 c는 증가하는 경향을 보였다.
Nam, Joong-Hee;Biegalski, Michael;Christen, Hans M.;Kim, Byung-Ik
한국자기학회:학술대회 개요집
/
한국자기학회 2011년도 임시총회 및 하계학술연구발표회
/
pp.7-8
/
2011
Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.
메탄의 부분 산화반응으로부터 합성가스를 제조하기 위해 M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm)를 제조하였다. 촉매는 BET, TEM, XPS의 기기를 사용하여 특성화하였다. M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm)의 BET 비표면적, 평균 기공 크기는 각각 538.8, 504.3, $447.3m^2/g$과 6.4, 6.8, 7.1 nm이었다. SBA-15 담체의 TEM 이미지는 중기공성 육방정계 구조를 보여주었고, Ce(10)-Ni(5)/SBA-15 촉매는 Ni와 Ce의 금속 입자가 SBA-15 담체의 구속효과에 의해서 담체 표면상에 균일하게 분포하고 있었다. XPS 분석으로 촉매 표면상에 격자산소($O^{2-}$, $O^-$)와 $Ce^{4+}$과 $Ce^{3+}$의 두개의 산화상태가 존재함을 알 수 있었다. 촉매상에서 메탄의 부분 산화 반응으로부터 합성가스의 수율은 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$에서 52.9% $H_2$와 21.7% CO이었으며, 75 h의 반응에서도 이 값을 일정하게 유지하였다. M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm)촉매는 합성가스 수율이 같은 경향을 보여주었다. 이러한 결과는 조촉매인 Ce, Nd, Sm의 Redox 반응이 촉매의 수율과 안정성을 향상시킨다는 것을 보여주었다.
Kim, Myung-Chan;Heo, Cheol-Ho;Park, Jin-Hyo;Park, Seung-Jun;Han, Jeon-Geon
한국진공학회:학술대회논문집
/
한국진공학회 1999년도 제17회 학술발표회 논문개요집
/
pp.122-122
/
1999
Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.
$_{1+x}$ Co$_{y}$ Mn$_{2-y}$$O_4$(0$\leq$x$\leq$0.2,y=0,1/9,1/6) spinel에 대한 합성온도 결정, 상의 생성 등 고온 상평형에 대해 연구하였다. 고온 합성에 따른 제 2상의 생성을 방지하기 위해 저온합성이 가능한 습식화학적 합성법중 하나인 oxalate 침전법을 사용하여 $600^{\circ}C$ 이하에서 단일상의 spinel로 합성하였다. 이렇게 합성된 분말에 대해 TG-DTA분석 및 고온에서 급냉한 분말에 대한 XRD분석을 통해 질량(산소)의 증감에 연관된 가역적인 상전이 온도인 $T_1$, $T_2$및 $T_{2'}$ 들을 확인하였으며, 첨가된 Li의 양과 치환된 Co의 양에 따른 격자상수, 상전이 온도의 변화, 고온상의 안정성 등에 대해 연구하였다. 본 연구를 통해 Li$_{1+x}$ Co$_{y}$ Mn$_{2-y}$$O_4$spinel의 합성온도 및 냉각속도 둥 합성과정 결정에 필요한 결과들을 얻을 수 있었다.
이산화황의 산화반응을 10 mol % $Ni-doped\;{\alpha}-Fe_2O_3$를 촉매로 하여 반응온도 범위 $320{\sim}440{\circ}C$에서 여러 산소 및 이산화황의 부분압으로서 반응속도를 측정하였다. 위 온도 영역에서 $SO_2$ 산화반응의 활성화에너지 값은 13.8 $kcal{\cdot}mol^{-1}$로서 얻어졌다. 반응속도 데이타는 산소에 대해서 0.5차, 이산화황에 대해서는 1차로서 전반응차수는 1.5차를 나타내었다. 이산화황과 산소를 여러 압력으로서 도입하여 전기전도도를 측정하였다. 반응속도 데이타와 전기전도도 데이타로 부터 반응기체들의 산화물계상에서 흡착메카니즘을 제안하였고, 촉매상에서 $SO_2$의 산화반응 메카니즘을 제안하였다. 산소와 이산화황은 이온상태로서 흡착하며, 산소는 니켈 dope로 인해 형성된 산소공위에 이산화황은 격자 산소에 흡착하였다. 반응속도 데이타와 전기전도도 데이타로부터 이산화황의 산화반응속도를 결정짓는 단계는 이산화황이 격자산소에 흡착하는 과정임을 알았다.
$Sr_{1-X}M_XFeO_{3-y}$ 계에서 (M=Ca), x=0.1, 0.2, 0.3, 0.4, 0.5에 대응하는 페로브스카이드계 고용체를 공기중, 1473K에 18시간 동안 열처리하여 합성하였다. X-선회절분석 결과 모든 고용체는 단순 입방정계를 나타내며, x=0.3까지는 x값의 증가에 따라 단위세포의 부피가 감소하고, x=0.4 이후에는 급격히 증가한다. 모어염 분석에 의하여 각각의 조성에 대한 $Fe^{4-}$ 이온의 몰비($\tau$값), 산소공위의 양(y값) 및 비화학양론적 화학식을 결정하였다. TG/DTA 실험(온도범위:300~1173K) 결과 x=0.1, 0.2인 시료는 3-y값이 감소하며, 냉각시 3-y값이 거의 가역적인 증가 경향을 보였다. $x{\geq}0.3$인 시료는 가역적인 무게의 변화를 보이지 않았으며, 냉각과정에서 3-y값은 거의 2.5를 유지하였다. 상대적으로 낮은 온도범위에서 모든 시료의 전기전도도 값은 반도성 범위에서 변화하였다. 그리고 일정한 온도에서의 전도도는 x값의 증가에 따라 감소하였다. 본 훼라이트 계의 전도도 메카니즘은 혼합원자가 상태 사이의 전도성 전자의 건너뜀 모형으로 제안할 수 있을 것이다. 고온에서 각 시료의 전도성은 금속성으로 변화하였다.
본 연구에서는 세라믹 소결 방법중의 하나인 건식법으로 $Ni_{1-x}Zn_{x}Fe_{2}O_{4}$을 제조하고 상온에서의 X-선 회절과 $M\"{o}ssbauer$ 스펙트럼을 조사하였다. 시료들은 Zn 함유량 x가 증가됨에 따라 격자상수는 선형으로 증가하며 $8.3111{$\AA$}~8.4184{$\AA$}({\pm}0.0003)$이다. 산소 파라미터는 0.3799~0.3852이며, X가 증가됨에 따라 증가하며, 특히 x=0.4 ~ 0.8 사이에서 크게 증가하였다. $M\"{o}ssbauer$ 스펙트럼은 x가 0.6이하인 시료들은 초미세 자기장에 의한 고명흡수선을 나타내고, Zn 함유량 x가 증가됨에 따라 초미세 자기장은 감소하고 있다. 특히 x가 0.2에서 0.6인 스팩트럼은 Yafet-Kittel의 자기구조를 갖으며 x가 0.6인 시료는 완화현상에 의한 공명흡수선을 나타내고 있다. x가 0.8이상인 시료는 사중극자 분열에 의한 공명흡수선을 나타내고 있다. 또한 $M\"{o}ssbauer$ 스펙트럼으로 부터 이성질체 이동(IS), 사중극자 분열(QS), 초미세 자기장(HF), 자기 모우멘트(${\mu}_{B}$)의 Zn 함유량 x에 따른 변화를 조사하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.