• Composites Research
• /
• 제36권2호
• /
• pp.80-85
• /
• 2023

원통형 복합재 격자 구조는 필라멘트 와인딩 공법으로 제작되며 제작 공정에서 두께방향 섬유체적비 불균일이 발생할 수 있다. 섬유체적비 불균일은 구조의 강성에 영향을 미칠 수 있으며 강성 및 좌굴 특성이 변화할 수 있다. 본 연구에서는 두께방향 섬유체적비 불균일이 복합재 격자 구조의 비틀림 좌굴 하중에 미치는 영향에 대하여 분석하였다. 섬유체적비 변화에 의한 강성 변화를 유한요소 모델에 적용하였고 비틀림 하중을 가한 뒤 좌굴 해석을 수행하였다. 두께방향 섬유체적비 편차에 따른 좌굴 하중을 비교하였다. 섬유체적비 불균일에 의해 비틀림 좌굴 하중이 저하될 수 있음을 확인하였다.

• Journal of the korean society of oceanography
• /
• 제36권1호
• /
• pp.9-18
• /
• 2001

Chemical speciation of five heavy metals (Cr, Cu, Ni, Pb, Zn) has been analyzed from 37 surface and 2 core sediments of Kyeonggi Bay, using the modified sequential extraction method based on Tessier et at. (1979). The results show that heavy metals in the Kyeonggi Bay surface sediments are associated dominantly with the crystal lattice fraction. But in the polluted sediments of the Incheon North Harbor, the importance of the labile fractions increased while that of the lattice fraction decreased. In particular, the adsorbed and the easily reducible fractions showed a noticeable increase. In the core samples emerged a speciation pattern which differed significantly from that of the surface sediments. A sharp increase in the percentage of the reducible and organic/sulfide fractions and a decrease in the lattice fraction were observed. Throughout the vertical column, however, the metal contents in the lattice fraction showed stability while those of the labile fractions showed an upward increase. The strong association of heavy metals with the organic/sulfide fraction could be attributed in part to the sulfate reduction prevailing in the polluted harbor sediments.

• Composites Research
• /
• 제34권2호
• /
• pp.129-135
• /
• 2021

본 논문에서는 필라멘트 와인딩 공정에서 발생하는 두께 방향 섬유체적비 불균일이 원통형 복합재 격자 구조의 좌굴하중에 미치는 영향을 확인하기 위해서 Vasiliev가 제안한 원통형 복합재 격자 구조 좌굴하중 이론식을 변형하여 섬유체적비에 따른 좌굴하중 저하를 확인하였다. 섬유체적비에 따라 격자 구조 리브의 각 층의 두께를 달리하였으며, 혼합법칙을 사용하여 각 층별로 물성치를 다르게 적용하였다. 구조물 크기, 두께, 섬유체적비 평균값을 달리한 유한요소모델에 대한 선형좌굴해석을 수행하였다. 최종적으로 이론식을 사용한 등가모델의 좌굴 하중 계산 결과와 유한요소해석 결과를 비교하여 두께 방향 섬유체적비 불균일이 원통형 복합재 격자 구조의 좌굴하중 저하의 원인이 될 수 있음을 확인하였다.

• Composites Research
• /
• 제31권4호
• /
• pp.161-170
• /
• 2018

원통형 복합재 격자 구조체는 필라멘트 와인딩 기법으로 제작되며 제작 공정에서 발생할 수 있는 섬유체적비 불균일과 수지응집층은 구조체의 강성도 및 강도에 영향을 줄 수 있다. 구조체의 주요 요소인 후프 및 헬리컬 리브의 단면 분석을 통해 섬유체적비 불균일 및 수지응집층의 존재 여부를 확인하였으며, 단면 분석 결과를 바탕으로 후프 및 헬리컬 리브에 대한 실험 및 이론적 접근을 통해 섬유체적비 불균일 및 수지응집층이 리브 요소의 강성도에 미치는 영향을 분석하였다. 섬유체적비 불균일이 후프 리브의 굽힘 거동에 영향을 미치는 것을 확인하였으며 헬리컬 리브의 경우 섬유체적비 불균일 및 수지응집층에 의해 강성도에 변화가 있음을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.53-61
• /
• 2010

In the present study, a laminar natural convection flow of $H_2O$-Cu nanofluid in a two dimensional enclosure has been investigated using a thermal lattice Boltzmann approach with the Bhatnagar-Gross-Krook (BGK) model. The effect of suspended nanoparticles on the fluid flow and heat transfer process have been studied for different controlling parameters such as particle volume fraction ($\Phi$), Rayleigh number (Ra). For this investigation the Rayleigh number changes from 104 to 106 and volume fraction varied from 0 to 10% with three different particle diameters (dp), say 10 nm, 20 nm and 40 nm. It is shown that increasing the Rayleigh number (Ra) and the volume fraction of nanofluid causes an increase of the effective heat transfer rate in terms of average Nusselt number (Nu) as well as the thermal conductivity of nanofluid. On the other hand, increasing the particle diameter causes the decrease of the heat transfer rate and thermal conductivity. The result of the analysis are compared with experimental and numerical data both for pure and nanofluids and it is seen a relatively good agreement.

• Interaction and multiscale mechanics
• /
• 제4권2호
• /
• pp.155-164
• /
• 2011

The lattice strain evolution within polycrystalline solids is influenced by the crystal orientation and grain interaction. For multi-phase polycrystals, due to potential large differences in properties of each phase, lattice strains are even more strongly influenced by grain interaction compared with single phase polycrystals. In this research, the effects of the grain interaction and crystal orientation on the lattice strain evolution in a two-phase polycrystals are investigated. Duplex steel of austenite and ferrite phases with equal volume fraction is selected for the analysis, of which grain arrangement sensitivity is confirmed in the literature through both experiment and simulation (Hedstr$\ddot{o}$m et al. 2010). Analysis on the grain interaction is performed using the results obtained from the finite element calculation based on the model of restricted slip within crystallographic planes. The dependence of lattice strain on grain interactions as well as crystal orientation is confirmed and motivated the need for more in-depth analysis.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.207-216
• /
• 2014

In this work, we report detailed numerical analysis of the near-elliptic core index-guiding triangular-lattice and square-lattice photonic crystal fiber (PCFs); where we numerically characterize the birefringence, single mode, cut-off behavior and group velocity dispersion and effective area properties. By varying geometry and examining the modal field profile we find that for the same relative values of $d/{\Lambda}$, triangular-lattice PCFs show higher birefringence whereas the square-lattice PCFs show a wider range of single-mode operation. Square-lattice PCF was found to be endlessly single-mode for higher air-filling fraction ($d/{\Lambda}$). Dispersion comparison between the two structures reveal that we need smaller lengths of triangular-lattice PCF for dispersion compensation whereas PCFs with square-lattice with nearer relative dispersion slope (RDS) can better compensate the broadband dispersion. Square-lattice PCFs show zero dispersion wavelength (ZDW) red-shifted, making it preferable for mid-IR supercontinuum generation (SCG) with highly non-linear chalcogenide material. Square-lattice PCFs show higher dispersion slope that leads to compression of the broadband, thus accumulating more power in the pulse. On the other hand, triangular-lattice PCF with flat dispersion profile can generate broader SCG. Square-lattice PCF with low Group Velocity Dispersion (GVD) at the anomalous dispersion corresponds to higher dispersion length ($L_D$) and higher degree of solitonic interaction. The effective area of square-lattice PCF is always greater than its triangular-lattice counterpart making it better suited for high power applications. We have also performed a comparison of the dispersion properties of between the symmetric-core and asymmetric-core triangular-lattice PCF. While we need smaller length of symmetric-core PCF for dispersion compensation, broadband dispersion compensation can be performed with asymmetric-core PCF. Mid-Infrared (IR) SCG can be better performed with asymmetric core PCF with compressed and high power pulse, while wider range of SCG can be performed with symmetric core PCF. Thus, this study will be extremely useful for designing/realizing fiber towards a custom application around these characteristics.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.45-46
• /
• 2005

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.101-102
• /
• 2009

SGOI MOSFETs with various Ge mole fractions were fabricated and compared to the SOI MOSFET. SGOI MOSFETs have a lager drain current and higher effective mobility than the SOI MOSFET as increased Ge mole fractions. The lattice constant difference causes lattice mismatch between the SiGe layer and the top-Si layer during the top-Si layer growth. However, SGOI MOSFETs have a lager leakage current at subthreshold region. Also, leakage current at subthreshold region increased with Ge mole fractions. This is attributable to the crystalline defects due to the lattice mismatch between the SiGe layer and the top-Si layer.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.500-504
• /
• 1997

Perovskite Pb0.7Ba0.3Zn1/3Nb2/3O3 substituted with 0.3 mole fraction for Pb-site in PbZn1/3Nb2/3O3 relaxor and pyrochlore Pb1.83Ba0.29Zn1.71Nb2/3O6.39 were mixed and dielectric characteristics of this composites were investigated. Percolation limit of perovskite phase, which was determined by microstructural observation in the composite as an isolation of perovskite phase from pyrochlore matrix, was 28.9-47.5 vol%. Ferroelectric phase transition below percolation limit depends on a parameter which affects the propagation of lattice vibration between isolated perovskite phase and pyrochlore matrix. Therefore, it is believed that ferroelectric lattice vibration of isolated perovskite phase could be transfered to pyrochlore matrix when the oxygen octahedra are linked in 3-dimension and highly polarizable Pb2+ ions are contained in both phases.