• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.1-6
• /
• 1981

This study examined the radial variations in element demensions of mongolian oak (Quercus mongolica.), elm (Ulmus japonica.), maackia(Maackia amurensis.), castor aralia (Kalopanax pictus.) from pith outwards. Disks were cut from the d.b.h.(above 1.2m) of each species and specimen for tangential pore diameters, fiber length, ray height and width were taken from 1-3rd, 5th, 10th, 15th.............40th ring number from pith. The tangential pore diameters in the earlywood increased rapidly near the pith and then maintained almost constant or very gradually increased diameters in about 20th-30th ring number from pith. In the latewood, tangential pore diameters gradually increased from pith to outwards though the increment is smaller than in early wood. Radial variations of ray height and width maintained almost constant, gradually increased or rapidly increased diameters and then maintained almost constant from pith to outwards. Patterns of radial variations in the fiber length were almost coincident with patterns of earlywood pore diameters, and of ray height or width in Ulmus japonica and Maackia amurensis.

• Journal of Plant Biology
• /
• v.27 no.2
• /
• pp.81-94
• /
• 1984

Anatomical features and cell dimensions of the secondary xylem in the stem of the korean Lauraceas including 6 genera and 12 species were investigated under a light microscope and scanning electron microscope. Key to identification among genera or species was made from the anatomical features and systematic correlation investigated. The stem woods of Lauraceae exhibit the following characters: (1) quite evenly distributed pores (diffuse-porous wood) (2) perforation plates simple or occasionally scalariform in the latewood vessels (3) almostly 2-seriate and heterocellular rays (4) abundant paratracheal-vasicentric parenchyma (5) oil cells. Especially, the appearance of simple perforation plates suggest the Lauraceae to be more or less advanced. It is considered that the series of specialization in the Lauraceae from the perforation plates and the height of rays is as LinderalongrightarrowNeolitsealongrightarrow(Machilus, Litsea, Iozoste)longrightarrowCinnamomum, and Lindera sericea is the most pribitive in the Lauraceae.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.3-18
• /
• 1985

In Korea, a study on the anatomical features of pitch pine (pinus rigida Miller) branch wood through photo-microscopical method was reported in 1972 by Lee. Therefore, as a further study of Lee's on the anatomical features in branch wood of pinus rigida miller that grows in Korea, compression wood, opposite wood, and side wood were selected and treated for the purpose of comparing their structures revealed on cross and radial surface through scanning electron microscope in this study. The obtained results in this study were summarized as follows; 1. The trachied transition from earlywood to late wood is very gradual and the tracheids are nearly regular in both arrangement and size in compression wood but this transition in opposite wood and side wood is abrupt and the tracheids in opposite wood and side wood are less regular than those in compression wood. Also, the annual ring width of opposite wood is narrower than that of compression wood or side wood and the rays revealed on cross surface of side wood are more distinct than compression wood and opposite wood rays. 2. The tracheids of compression wood show roundish trends especially in earlywood but those of opposite wood and side wood show some angular trends. And intercellular space, helical cavity, and spiral check are present in both earlywood and latewood of compression wood but not present in opposite wood and side wood irrespective of earlywood and latewood. 3. The wall thickness of latewood tracheid is similar to that of earlywood tracheid in compression wood whereas the wall thickness of latewood tracheid is by far thicker than that of earlywood tracheid in opposite wood and side wood and the S3 layer of secondary wall is lack in compression wood tracheid unlike opposite wood and side wood tracheid. 4. The tracheids in compression wood are often distorted at their tips unlike those in opposite wood and side wood and the bordered pit in compression wood tracheid is located at the bottom of helical groove unlike that in opposite wood and side wood tracheid. 5. The bordered pits in radial wall of opposite wood and side wood tracheids are oval in shape but those of compression wood tracheids show some modified oval shape. 6. In earlywood of side wood, the small apertures of cross-field pits are roundish triangle to rectangle and the large one are fenestriform through the coalition of two small ones. However, the small apertures of cross-field pits are upright oval and the large ones are procumbent oval shape in earlywood of opposite wood and the apertures of cross-field pits in compression wood are tilted bifacial convex lens shape in earlywood and slit in late wood because of the border on tracheid side.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 1992

This study was performed to investigate the hardness of wood related to the wood surface, sap and heartwood, early and latewood, specific gravity, annual ring width and moisture content on major Korean tree species such as Pinus koraiensis, Abies holophylla, Larix leptolepis and Quercus valiabilis. The results were summarized as follows: 1. The arithmetic mean values of wood hardness on cross section were respectively $8.0kg/mm^2$ on Quercus valiabilis, $7.4kg/mm^2$ on Larix leptolepis, $5.1kg/mm^2$ on Pinus koraiensis and $4.7kg/mm^2$ on Abies hollophylla. 2. Generally hardness of wood on cross section was greater than the others and the proportion of cross section hardness to radial was respectively 2.8 on Quercus valiabilis, 2.6 on Larix leptolepis, 3.8 on Pinus koraiensis, and 4.1 on Abies holophylla and that proportion was tend to be decrease as specific gravity increased. 3. It was recognized that the hardness of sap and heartwood was different from each of the tree species and generally heartwood hardness was somewhat greater than sapwood. 4. Generally latewood hardness with in a ring was greater than earlywood and the proportion of earlywood hardness to latewood decreased as specific gravity increased. 5. The relations between hardness of wood and specific gravity show a high positive correlation on all sample tree species. 6. The values of hardness decreased with increasing annual ring width. 7. Hardness of wood on Abies holophylla was greatest in oven dried wood and it was decreased as moisture content increased, but not changed with moisture content abve F.S.P.. The proportion of oven dried wood hardness to green are respectively 3.0 on cross, 2.4 on radial and 1.9 on tangential section.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.1-13
• /
• 1998

In this paper, it has been discussed on the relation between the anatomical features of woods and the penetration of methyl methacrylate monomer system into major Korean tree species, especially the Pinus koraiensis, Larix leptolepis, Quercus mongolica and Tilia amurensis. 1. There was some differences in penetration of polymers among different tree species, but generally the penetration of ring porous woods seems to be larger than that of diffuse porous woods and it was very difficult to penetrate to Larix leptolepis, especially to the that of heart wood. 2. The penetration on transeverse surface was relatively easy but radial and tangential impregnation were somewhat hard and differences between them were negligible. 3. The penetration of sapwood was larger than that of heartwood and its differences varied according to the existence of tyloses or contents in vessel. 4. Generally the polymer penetration of earlywood was larger than that of latewood in ring porous woods, but on the contrary, penetration of earlywood was small than that of latewood on diffuse porous woods. 5. Vessel diameter of wood had nearly no relation to polymers penetration. This seems to come from the reason that effective vessel diameter varies with the existence of tyloses or contents in vessel. 6. The penetration of ray tracheids was larger than that of ray parenchyma cells in softwoods, but penetration of hardwood rays seems to be small in comparison with softwood ray parenchyma cells. 7. Specific gravity and annual ring width had no relation to the penetration of polymer.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.78-87
• /
• 2014

It was examined the key criterion of the time of property revelation as Uljin-Geumgangsong wood. For this purpose, we investigated in physical properties in pine wood (Pinus densiflora Sieb. et Zucc.) and representative Uljin-Geumgangsong wood (Pinus densiflora forma erecta Uyeki). The results are as follows; Air-dry density of Uljin-Geumgangsong wood have higher values over about 20 percent than that of pine wood. And also heartwood rate of Uljin-Geumgansong wood have higher values above 70 percent. The number of vertical resin canals per $1mm^2$ in Uljin-Geumgangsong wood was 40 percent greater than in pine wood. As the average diameters of axial resin canals were 67.8 mm and 67.3~69.9 mm in pine wood and in Uljin-Geumgangsong wood, respectively, there was no significant difference among wood species. There tends to be an increase in diameters as annual rings increase. The number of horizontal resin canals in Uljin-Geumgangsong-1 was approximately 55 percent greater than in pine wood and Uljin-Geumgangsong-2. The number of resin canals in pine wood and Uljin-Geumgangson-2 decreased while it increased in Uljin-Geumgangsong-1 as annual rings increased. No significant difference was found in the number of rays among wood species and between earlywood and latewood of same wood species. As annual rings increased the number of rays decreased in both pine wood and Uljin-Geumgangsong. The heights of rays were greater in pine wood than Uljin-Geumgangsong and no difference was found between earlywood and latewood. In conclusion, rings of tree for the time of property revelation as Uljin-Geumgangsong wood is assumed about more than 150 years.

• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.268-277
• /
• 2012

Among the domestic softwoods, technical value of Pinus koraiensis small diameter logs which have comparatively low applicability was evaluated and sensitive characteristics and physical characteristics were investigated and analyzed for examining if it can be utilized as the interior decoration material. For the sensitive characteristics of Pinus koraiensis, wood figure, wood grain, wood color and odor were evaluated and for the physical characteristics, growth-ring width and latewood percentage, abrasion, density, shrinkage, swelling, absorption, roughness and hardness were evaluated. Then, the possibility to be developed as the interior decoration material was found. As the result of evaluating sensitive characteristics and physical characteristics of domestic Pinus koraiensis, wood figure, wood grain, color and scent clearly were judged to have excellent visual factor as the interior decoration material. And, physical characteristics were also judged to be excellent, so it is judged to be developed as the interior decoration material. Therefore, as the result of various forms of design pattern with domestic Pinus koraiensis small diameter logs, several patterns of interior decoration can be developed by characteristics of each side and colors of heartwood and sapwood. And, in the future, it can be applied to furniture design or interior decoration material for the proper use. Especially, it is considered to contribute to wood applying industry through the study on the quality of domestic small diameter logs which have low applicability.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.12-20
• /
• 2006

The objectives of this study were to identify the species of coffin woods excavated at Ma-jeon relic in Jeonju and to date this coffin using tree-ring method. Al coffin woods were identified as red pines, most possibly, Pinus densiflora S. et Z. Tree-ring dating provides a calender year to each ring and produces the cutting date, if the bark presents. Due to the presence of bark and complete latewood present, the cutting date of the tree for coffin turned out between A.D. 1637 autumn and 1638 spring. However, due to the seasoning and storage periods, actual coffin manufacturing and burial time may be a little different from the tree-ring date.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.261-267
• /
• 2007

This report describes the wood anatomy and 1% safranine solution penetration depth in radial and longitudinal directions of Anthocephalus chinensis belonging to the family Rubiaceae native to Bangladesh. The wood of this species was mostly characterized by diffuse porous, vessel with simple perforation plate, vestured alternate intervessel pittings, relatively medium vessel elements and fiber, and nonseptate fiber with distinctly bordered pits at radial wall. The body ray cell was procumbent with 2 to over 4 rows of upright and square marginal cells. Sometimes, the rays with procumbent, square and upright cells were mixed. Latewood fiber was thin to thick walled while it was very thin walled in earlywood. Axial parenchyma was diffuse, vasicentric, 5-8 cells per parenchyma strand dominantly present. Liquid penetration depth was observed in radial and longitudinal directions at moisture level of 7.42%. Longitudinal penetration was found 6.3 times higher than radial penetration. The initial penetration rate of safranine solution was high, but gradually decreased during the course of time. Different anatomical features were found to be responsible for the variation of safranine solution penetration depth compared to Gmelina arborea.