• 한국전산구조공학회논문집
• /
• 제26권1호
• /
• pp.69-77
• /
• 2013

초고층 건물의 구조설계시 풍하중에 의한 횡방향 변위를 적절한 값 이내로 줄이는 것이 가장 중요한 문제 중에 하나이다. 이를 위해서 추가적인 감쇠기 및 진동제어장치를 사용하는 방법이 일반적으로 고려되고 있다. 이 때 일반적으로 구조물의 특성은 변화없이 추가되는 제어장치에 대해서만 최적설계를 수행하게 된다. 본 연구에서는 구조물과 스마트 제어장치의 다목적 통합 최적화를 통하여 추가되는 스마트 제어장치로 인하여 구조물의 물량을 줄일 수 있는 가능성을 검토하였다. 이를 위하여 다이어그리드 구조시스템이 적용된 60층 초고층 건물을 예제 구조물로 선택하였고, 인공 풍하중에 대한 풍응답을 검토하였다. 스마트 제어장치로는 TMD에 MR 감쇠기를 설치한 스마트 TMD를 사용하였다. 구조물의 응답과 구조물량 및 제어장치의 용량을 동시에 줄이는 것이 필요하므로 본 연구에서는 다목적 유전자알고리즘을 적용하였다. 수치해석결과 제어성능목표를 만족시키면서 구조물의 물량과 제어장치의 용량을 적절하게 줄일 수 있는 다양한 설계 최적안을 얻을 수 있었다.

• Earthquakes and Structures
• /
• 제13권1호
• /
• pp.59-66
• /
• 2017

Modern seismic codes rely on performance-based seismic design methodology which requires that the structures withstand inelastic deformation. Many studies have focused on the inelastic deformation ratio evaluation (ratio between the inelastic and elastic maximum lateral displacement demands) for various inelastic spectra. This paper investigates the inelastic response spectra through the ductility demand ${\mu}$, the yield strength reduction factor $R_y$, and the inelastic deformation ratio. They depend on the vibration period T, the post-to-preyield stiffness ratio ${\alpha}$, the peak ground acceleration (PGA), and the normalized yield strength coefficient ${\eta}$ (ratio of yield strength coefficient divided by the PGA). A new inelastic deformation ratio $C_{\eta}$ is defined; it is related to the capacity curve (pushover curve) through the coefficient (${\eta}$) and the ratio (${\alpha}$) that are used as control parameters. A set of 140 real ground motions is selected. The structures are bilinear inelastic single degree of freedom systems (SDOF). The sensitivity of the resulting inelastic deformation ratio mean values is discussed for different levels of normalized yield strength coefficient. The influence of vibration period T, post-to-preyield stiffness ratio ${\alpha}$, normalized yield strength coefficient ${\eta}$, earthquake magnitude, ruptures distance (i.e., to fault rupture) and site conditions is also investigated. A regression analysis leads to simplified expressions of this inelastic deformation ratio. These simplified equations estimate the inelastic deformation ratio for structures, which is a key parameter for design or evaluation. The results show that, for a given level of normalized yield strength coefficient, these inelastic displacement ratios become non sensitive to none of the rupture distance, the earthquake magnitude or the site class. Furthermore, they show that the post-to-preyield stiffness has a negligible effect on the inelastic deformation ratio if the normalized yield strength coefficient is greater than unity.

• 한국지반공학회논문집
• /
• 제37권11호
• /
• pp.51-60
• /
• 2021

하천의 세굴은 교각 주변의 흙을 침식시켜 교각의 횡방향 지지력을 저감시키고 구조물의 건전도를 저하시키게 된다. 본 연구에서는 세굴이 구조물의 건전도에 미치는 영향을 살펴보고자 주변지반의 굴착에 따른 교각의 고유진동수 측정실험을 수행하였다. 폐교예정인 만경강교의 우물통기초 교각에서 충격진동시험을 수행하였다. 교각의 상단, 중앙, 하단에 가속도계를 부착하고 세 지점을 타격하여 가속도를 계측하였다. 실험 결과, 타격위치에 따른 가속도 측정값 중 상단타격이 일관되고 합리적인 가속도 결과를 보여주었다. 계측된 가속도는 고속 푸리에 변환(FFT)을 통하여 주파수 영역으로 변환되었고, 이를 이용하여 고유진동수를 측정하였다. 또한, 세굴이 교각의 고유진동수 변화에 미치는 영향을 분석하기 위하여 교각 주변 지반을 굴착하면서 고유진동수의 변화를 측정하였다. 그 결과, 굴착 깊이에 따라 고유 진동수가 감소하는 경향을 보여주었지만, 우물통 기초형식이 큰 강성을 가지고 있어 그 감소폭은 작은 것으로 나타났다.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.329-350
• /
• 2016

A parametric study was conducted to investigate the seismic deformation demands in terms of drift ratio, plastic base rotation and compression strain on rectangular wall members in frame-wall systems. The wall index defined as ratio of total wall area to the floor plan area was kept as variable in frame-wall models and its relation with the seismic demand at the base of the wall was investigated. The wall indexes of analyzed models are in the range of 0.2-2%. 4, 8 and 12-story frame-wall models were created. The seismic behavior of frame-wall models were calculated using nonlinear time-history analysis and design spectrum matched ground motion set. Analyses results revealed that the increased wall index led to significant reduction in the top and inter-story displacement demands especially for 4-story models. The calculated average inter-story drift decreased from 1.5% to 0.5% for 4-story models. The average drift ratio in 8- and 12-story models has changed from approximately 1.5% to 0.75%. As the wall index increases, the dispersion in the calculated drifts due to ground motion variability decreased considerably. This is mainly due to increase in the lateral stiffness of models that leads their fundamental period of vibration to fall into zone of the response spectra that has smaller dispersion for scaled ground motion data set. When walls were assessed according to plastic rotation limits defined in ASCE/SEI 41, it was seen that the walls in frame-wall systems with low wall index in the range of 0.2-0.6% could seldom survive the design earthquake without major damage. Concrete compressive strains calculated in all frame-wall structures were much higher than the limit allowed for design, ${\varepsilon}_c$=0.0035, so confinement is required at the boundaries. For rectangular walls above the wall index value of 1.0% nearly all walls assure at least life safety (LS) performance criteria. It is proposed that in the design of dual systems where frames and walls are connected by link and transverse beams, the minimum value of wall index should be greater than 0.6%, in order to prevent excessive damage to wall members.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.435-440
• /
• 2000

It is important to pay careful attention to construction backfill for the structural integrity of concrete box culvert. The stability of the surrounding soil is important to the structural performance of most culverts. Good compaction by the dynamic compaction roller with big capacity is as effective as good backfill materials to increase the structural integrity of culvert. However structural distress of the culvert could be occur due to the excessive earth pressure by dynamic compaction load. In this study, 16 box culverts were constructed with various compaction materials and construction methods. Three types of on-site soils such as subbase, subgrade and roadbed materials were used as backfill materials in the test program. Compaction methods were adapted based on the site conditions. In most cases, dynamic compaction rollers with 10 to 16 ton weights were used and vibration speed were applied from 2400 to 2500 rpm for the great compaction energy. Some backfill compactions with good quality soils were carried out to examine the effect of EPS(Expanded Polystyrene) panels with changes of compaction thickness. This paper presents the main results of the research conducted to access the engineering performance of the backfill materials. The characteristics of earth pressures are discussed. It is observed that subgrade and roadbed materials are needed more careful compaction than subbase materials. It is shown that EPS panels are effective to mitigate dynamic lateral earth pressure on the culverts. It is also obtained that the dynamic pressure depends on the soil properties. In addition, the coefficient of dynamic earth pressure (K$\sub$dyn/=ΔP$\sub$H/ ΔP$\sub$V/) during compaction is discussed.

• 한국항공우주학회지
• /
• 제38권10호
• /
• pp.973-978
• /
• 2010

본 논문에서는 유격을 고려한 항공기 전방 착륙 장치의 쉬미 현상을 연구하였다. 쉬미는 항공기의 이착륙 시 랜딩기어가 주행도중 측방향과 조향방향으로 진동에 놓이는 현상이다. 이 현상은 스트럿의 낮은 강성, 랜딩기어 내부의 마찰과 유격, 휠의 불균형이나 마모된 부품 등으로 인해 발생하며, 항공기의 안정성을 저하시킨다. 유격은 비선형 요소이기 때문에 기술 함수로 선형화 하여 주파수 영역에서 안정성해석을 수행하였고, 4차 Runge - Kutta를 이용하여 시간영역에서 안정성해석을 수행하였다. 본 연구에서는 수치적인 해석법을 통해 쉬미현상의 선형 동특성과 비선형 동특성을 조사하였다. 유격을 고려한 비선형 수치 해석결과, 선형 임계속도보다 낮은 속도에서 제한주기진동이 발생하는 등, 유격으로 인해 쉬미 안정성이 저감되는 결과를 관찰하였다.

• Steel and Composite Structures
• /
• 제5권4호
• /
• pp.271-287
• /
• 2005

The seismic behavior of two steel moment-resisting frames, which satisfy all the current seismic design requirements, are evaluated and compared in the presence of pre-Northridge connections denoted as BWWF and an improved post-Northridge connections denoted as BWWF-AD. Pre-Northridge connections are modeled first as fully restrained (FR) type. Then they are considered to be partially restrained (PR) to model their behavior more realistically. The improved post-Northridge connections are modeled as PR type, as proposed by the authors. A sophisticated nonlinear time-domain finite element program developed by the authors is used for the response evaluation of the frames in terms of the overall rotation of the connections and the maximum drift. The frames are excited by ten recorded earthquake time histories. These time histories are then scaled up to produce some relevant response characteristics. The behaviors of the frames are studied comprehensively with the help of 120 analyses. Following important observations are made. The frames produced essentially similar rotation and drift for the connections modeled as FR type and PR type represented by BWWF-AD indicating that the presence of slots in the web of beams in BWWF-AD is not detrimental to the overall response behavior. When the lateral displacements of the frames are significantly large, the responses are improved if BWWF-AD type connections are used in the frames. This study analytically confirms many desirable features of BWWF-AD connections. PR frames have longer periods of vibration in comparison to FR frames and may attract lower inertia forces. However, calculated periods of the frames of this study using FEMA 350 empirical equation is longer than those calculated using dynamic characteristics of the frames. This may result in even lower design forces and may adversely influence the design.

• 한국항공우주학회지
• /
• 제39권7호
• /
• pp.605-611
• /
• 2011

쉬미는 항공기의 이착륙 시 랜딩기어가 주행도중 측방향 및 조향방향의 진동이 발생하는 현상이다. 쉬미 현상은 스트럿의 낮은 강성, 랜딩기어 내부의 유격, 휠의 불균형이나 마모된 부품 등으로 인해 발생하며, 항공기의 안정성을 저하시킨다. 본 연구는 소형항공기의 쉬미 안정성 검토를 위해 수행되었다. 수치해석을 위하여 소형항공기의 전방 착륙장치를 선형시스템으로 모델링하고 상태방정식을 수립하였다. 근궤적 기법을 이용한 주파수 영역 해석과 4차 Runge-Kutta 방법을 이용한 시간영역 해석을 통해 쉬미 현상을 예측하였고 주요 변수의 설계범위를 검토하였다. 현 착륙장치는 와셔의 압축력을 이용하여 조향 방향 마찰을 가함으로써 쉬미현상을 저감하는 기법을 채택하고 있으므로 마찰을 기술함수를 이용하여 선형화시키고 상태방정식에 적용하여 해석을 수행함으로써 쉬미의 발생이 저감되는 결과를 확인하였다.

• 음성과학
• /
• 제8권2호
• /
• pp.23-37
• /
• 2001

The primary sound produced by the vibration of vocal folds reaches the velopharyngeal isthmus and is directed both nasally and orally. The proportions of the each component is determined by the anatomical and functional status of the soft palate. The oral sounds composed of oral vowels and consonants according to the status of vocal tract, tongue, palate and lips. The nasal sounds composed of nasal consonants and nasal vowels, and further modified according to the status of the nasal airway, so anatomical abnormalities in the nasal cavity will influence nasal sound. The measurement of nasal sounds of speech has relied on the subjective scoring by listeners. The nasal sounds are described with nasality and nasalization. Generally, nasality has been assessed perceptually in the effect of maxillofacial procedures for cleft palate, sleep apnea, snoring and nasal disorders. The nasalization is considered as an acoustic phenomenon. Snoring and sleep apnea is a typical disorders due to abundant velopharynx. The sleep apnea has been known as a cessation of breathing for at least 10 seconds during sleep. Several medical and surgical methods for treating sleep apnea have been attempted. The uvulopalatopharyngoplasty(UPPP) involves removal of 1.0 to 3.0 cm of soft palate tissue with removal of redundant oropharyngeal mucosa and lateral tissue from the anterior and sometimes posterior faucial pillars. This procedure results in a shortened soft palate and a possible risk following this surgery may be velopharyngeal malfunctioning due to the shortened palate. Few researchers have systematically studied the effects of this surgery as it relates to speech production. Some changes in the voice quality such as resonance (nasality), articulation, and phonation have been reported. In view of the conflicting reports discussed, there remains some uncertainty about the speech status in patients following the snoring and sleep apnea surgery. The study was conducted in two phases: 1) acoustic analysis of oral and nasal sounds, and 2) evaluation of nasality.

• 한국지진공학회논문집
• /
• 제14권4호
• /
• pp.23-28
• /
• 2010

본 연구는 철골 모멘트 골조의 이력거동을 잘 나타내는 강도한계 이선형 단자유도 시스템에 대하여 지반조건, 후탄성 기울기, 감쇠비, 항복강도 저감계수, 고유주기 등의 변화가 비탄성변위비에 미치는 영향을 분석하였다. NEHRP의 기준에 따라 B(보통암지반), C(매우 조밀한 토사지반), D(단단한 토사지반)의 지반조건에 해당하는 총 240개의 지진 가속도에 대하여 비선형 시간이력 해석을 수행하였다. 본 연구에서는 비탄성 거동 하에서 P-$\Delta$ 효과를 반영할 수 있도록 음강성비를 -0.1 에서 -0.5까지 고려하였다. 비선형 회귀분석을 통하여 감쇠비 2%, 5%, 10%, 20%에 대한 강도한계 이선형 모델의 비탄성 변위비와 로그표준편차식을 제안하였다.