• 전산구조공학
• /
• 제20권1호
• /
• pp.59-64
• /
• 2007

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.535-543
• /
• 2017

목구조물 기둥-보 접합물로는 슬릿 가공된 부재에 강판을 삽입한 형상이 통용되고 있다. 본 연구에서는 접합부가 접착된 강절형 문형라멘프레임 및 강판 대용인 목질접합물을 제작하여 절반은 기둥부재에 일체화하고 나머지 절반은 보부재와 핀으로 접합한 반강절형 문형라멘프레임을 제작하였다. 목질 문형라멘프레임들은 강판삽입형 접합부 문형라멘프레임과 수평내력성능을 비교 분석하였다. 수평내력성능은 완전탄소성모델 분석과 구간별 강성변화율 및 단기허용전단내력으로 평가하였다. 실험결과, 강절형 문형라멘프레임의 최대내력이 강판삽입형 접합부 문형라멘프레임 보다 낮게 측정되어 항복 내력은 0.58, 종국내력은 0.48로 산출되었으나, 초기강성과 소성률은 각각 1.35, 1.1 향상된 값이 측정되었다. 반강절형 문형라멘프레임의 완전탄소성모델 분석 결과 최대내력은 강절형 문형라멘프레임보다 낮았으나 파괴 후 인성이 우수하여 종국내력은 1.05~1.07 높은 값이 산출되었다. 강판삽입형 문형라멘프레임은 반복 시험이 진행됨에 따라 강성이 급격히 감소한 반면 접합부가 목질로된 문형라멘프레임들의 강성은 서서히 감소되었다.

• 한국지반공학회논문집
• /
• 제32권12호
• /
• pp.15-22
• /
• 2016

본 연구에서는 Strain wedge 해석모델을 이용하여 수평하중이 작용하는 단말뚝의 극한수평저항력 산정식을 제안하였다. 저항특성은 쐐기 후면부의 수평저항토압, 쐐기 측면부의 전단저항, 그리고 말뚝과 지반의 마찰저항으로 구분하였고, 이들의 합으로써 극한수평저항력을 산정하였다. 제안된 식을 기존의 쐐기 이론과 현장실험, 유한차분법과비교 분석하였다. 그 결과 제안식의 값이 기존의 쐐기 이론과 1.03%, 현장실험과는 0.40~3.32%, 유한차분법과는 6.02%의 차이를 보였다.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.279-288
• /
• 2016

이 연구에서는 철근콘크리트(reinforced concrete, RC) 기둥의 휨 거동을 비교적 간단한 방법으로 평가하기 위해서 모멘트-곡률 관계를 단순화하였다. RC 기둥에서 주철근 배근을 이상화하고 힘의 평형조건 및 변형률 적합조건에 기반하여 초기 휨 균열 발생, 인장철근 항복 도달, 최대 내력 및 최대 내력 도달 후 최대 내력의 80% 시점에서의 내력과 중립축 깊이를 산정하였다. 기둥의 최대 내력 이후의 콘크리트 압축연단 변형률은 Kim et al의 구속된 콘크리트 응력-변형률 관계를 이용하여 산정하였다. 단순화된 모멘트-곡률 관계로부터 환산된 기둥의 횡하중-횡변위 관계는 다양한 변수하에서 수행한 기둥 실험결과와 잘 일치하였다. 고려된 각 단계에서의 모멘트와 중립축 깊이는 주철근 지수, 횡보강근 체적지수 및 축력 지수의 함수로 모델링하였다. 결국, 기둥의 곡률 연성은 콘크리트 압축강도 및 주철근과 횡보강근의 양과 함께 작용 축하중비에 중요한 영향을 받았다.

• 한국방재학회 논문집
• /
• 제9권6호
• /
• pp.1-9
• /
• 2009

콘크리트의 구속효과 및 재료 비선형성, 강재의 변형 경화, 초기작용 축력을 고려하여 원형 콘크리트 충전 강관(Concrete Filled Steel Tube : CFT) 기둥의 해석을 위한 프로그램을 작성하고 검증 및 해석을 수행하였다. 축력-모멘트 상관관계 해석, 모멘트-곡률 해석, 모멘트-횡변위에 대한 해석을 수행하고, 선행연구자의 실험결과와 비교하여 검증하였다. 검증결과, 작성된 프로그램은 실제 CFT 기둥의 거동에 근접하였으며, 콘크리트의 구속효과를 고려한 경우 그렇지 않은 경우보다 더 큰 강도와 연성능력을 나타내었다. 콘크리트의 강도와 강관의 두께 변화에 따른 간단한 매개변수 해석을 수행하였으며, 콘크리트의 강도 증가 시 CFT 기둥의 강도는 증가하나 연성은 저하되는 결과를 보여주었다. 반면에 강관 두께를 증가시키는 경우에는, CFT 기둥의 강도와 연성 모두 증가하는 결과를 보여주었다.

• Structural Engineering and Mechanics
• /
• 제9권6호
• /
• pp.615-636
• /
• 2000

Some elevated water tanks have failed due to torsional vibrations in past earthquakes. The overall axisymmetric structural geometry and mass distribution of such structures may leave only a small accidental eccentricity between centre of stiffness and centre of mass. Such a small accidental eccentricity is not expected to cause a torsional failure. This paper studies the possibility of amplified torsional behaviour of elevated water tanks due to such small accidental eccentricity in the elastic as well as inelastic range; using two simple idealized systems with two coupled lateral-torsional degrees of freedom. The systems are capable of retaining the characteristics of two extreme categories of water tanks namely, a) tanks on staging with less number of columns and panels and b) tanks on staging with large number of columns and panels. The study shows that the presence of a small eccentricity may lead to large displacement of the staging edge in the elastic range, if the torsional-to-lateral time period ratio $({\tau})$ of the elevated tanks lies within a critical range of 0.7< ${\tau}$ <1.25. Inelastic behaviour study reveals that such excessive displacement in some of the reinforced concrete staging elements may cause unsymmetric yielding. This may lead to progressive strength deterioration through successive yielding in same elements under cyclic loading during earthquakes. Such localized strength drop progressively develop large strength eccentricity resulting in large localized inelastic displacement and ductility demand, leading to failure. So, elevated water tanks should have ${\tau}$ outside the said critical range to avoid amplified torsional response. The tanks supported on staging with less number of columns and panels are found to have greater torsional vulnerability. Tanks located near faults seem to have torsional vulnerability for large ${\tau}$.

• 한국지진공학회논문집
• /
• 제24권5호
• /
• pp.233-241
• /
• 2020

This paper is to investigate the retrofitting effect for a non-seismic reinforced concrete frame strengthened by perimeter steel moment frames with indirect integrity, which ameliorates the problems of the direct integrity method. To achieve this, first, full-scale tests were conducted to address the structural behavior of a two-story non-seismic reinforced concrete frame and a strengthened frame. The non-seismic frame showed a maximum strength of 185 kN because the flexural-shear failure at the bottom end of columns on the first floor was governed, and shear cracks were concentrated at the beam-column joints on the second floor. The strengthened frame possessed a maximum strength of 338 kN, which is more than 1.8 times that of the non-seismic specimen. A considerable decrease in the quantity of cracks for the strengthened frame was observed compared with the non-seismic frame, while there was the obvious appearance of the failure pattern due to the shear crack. The lateral-resisting capacity for the non-seismic bare frame and the strengthened frame may be determined per the specified shear strength of the reinforced columns in accordance with the distance to a critical section. The effective depth of the column may be referred to as the longitudinal length from the border between the column and the foundation. The lateral-resisting capacity for the non-seismic bare frame and the strengthened frame may be reasonably determined per the specified shear strength of the reinforced columns in accordance with the distance to a critical section. The effective depth of the column may be referred to as the longitudinal length from the border between the column and the foundation. The proposed method had an error of about 2.2% for the non-seismic details and about 4.4% for the strengthened frame based on the closed results versus the experimental results.

• 대한의용생체공학회:의공학회지
• /
• 제44권6호
• /
• pp.482-487
• /
• 2023

The purpose of this study was to investigate changes in wrist extensor activity, pain, and grip strength before and after wearing a forearm strap in their 20s who complained of chronic lateral epicondylitis for more than 6 weeks. As a result of the study, there was an increase in wrist extensor activity on both the injured and non-injured sides after wearing the forearm strap, but this was not statistically significant. There was a statistically decrease in pain after wearing the forearm strap on the injured side, and a statistically significant increase in grip strength on both. After applying the forearm strap with pad, there was an increase in muscle activity of ECRB (extensor carpi radialis brevis) on both the injured and non-injured sides. This is thought to be due to the strap pad acting as a compressive force, reducing pain, and increasing muscle recruitment ability due to stability in wrist extension. However, considering that the number of study subjects is insufficient to generalize the results, additional supplementary research is deemed necessary.

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1903-1912
• /
• 1996

A quantitative study of impact damage of a soda-lime glass was carried out. An initiation and a propagation of cracks by the impact of two inds of steel ball was investigated. The fron, side and rear view of cracks were observed by a stereo-microscope. And the lowering of the benidng strength due to the impact of steel balls was examined through the 4-point bending test. A transparent glass is very helpful to understand and analyze the impact damage behavior of another brittle matereial. A deagdram about crack patterns according to the threshold impact velocity was sketched. A ring crack and a cone crack were formed at the low impact velocity. And as the impact velocity was higher, initial lateral crack was generated on the slanting surface of cone crack, and radial cracks were generated from the outermost ring crack. When the impact velocity of steel balls exceed a critical velocity, the contact site of specimens were crushed. According to the propagation of a cone crack, a rapid strength degradation occurred. In the specimen having crushed region, a bending strength was converged to a constant value instead of strength degradation.

• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1121-1137
• /
• 2016

A large number of structure in the world were build with poor seismic details, with or without any lateral load resisting system like concentrically braced frames and steel plate shear walls. These structures can reveal deteriorating hysteretic behaviors with stiffness and strength degradation. Therefore, seismic retrofitting of such structures for drift control has vital importance. In this study a retrofit methodology has been developed, which involves diagonal bracing of steel frames with different cable arrangements. In the experimental and numerical program 5 different lateral load resisting system were tested and results compared with each other. The results indicated that multi-cable arrangements suggested in this study showed stable ductile behavior without any sudden decrease in strength. Due to the usage of more than one diagonal cable, fracture of any cable did not significantly affect the overall strength and deformation capacity of the system. In cable braced systems damages concentrated in the boundary zones of the cables and beams. That is why boundary zone must have enough stiffness and strength to resist tension field action of cables.