• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• ALGAE
• /
• v.21 no.1
• /
• pp.109-124
• /
• 2006

Responses to various types of mechanically induced wounding were followed in the giant-celled Caulerpalean species, Derbesia tenuissima, using time-lapse video-microscopy. Gametophyte vesicle cells. Puncture wounding: the gametophyte cell seals the puncture in 5 min. This is followed by cycles of ruptures and sealing, ending with full recovery in 24 hrs. Cut wounding: the protoplast immediately retracts away from the wall and reforms an intact, deflated protoplast that expands to fill the original cell within 21 hrs. Crush wounding (internal). When retained within the cell wall many protoplast fragments condense, round up, and coalesce; the reconstituted protoplast expands until it attains complete recovery, filling the original cell shape in 12 hrs. Crush wounding (external). Protoplast fragments extruded from the crushed cell are more numerous and smaller taking longer to recover. Most fragments become spherical, transforming into small viable cells capable of reproduction in several days. Sporophyte filaments. Crush wounding creates many small fragments that initially condense, coalesce and then expand within the wall to restore a complete filament with normal cytoplasmic streaming within 5 hrs. Reproduction: gametophyte. Our culture isolates produce more females than males (30:1). Gametangia develop one day before discharge that occurs explosively (1/6 sec) at first morning light. The vesicle cell forms successive gametangia every 14 days. Sporophyte. Each sporangium develops on a lateral branch that becomes isolated by the creation of successive basal plugs. After cytoplasmic cleavage and differentiation the stephanokont spores are discharged. The spores settle quickly and germinate forming gametophyte cells.

• ALGAE
• /
• v.24 no.4
• /
• pp.249-256
• /
• 2009

The occurrence of Laminarionema elsbetiae (Ectocarpaceae, Phaeophyceae), as epi-endophyte of Rhodymenia pseudopalmata (Rhodymeniales, Rhodophyta), described from Santa Isabel, Rawson, Argentina. L. elsbetiae grows in the host tissues forming epi-endophytic relationship in the epidermal, cortical and medullar layers. Epiphytic thalli of L. elsbetiae were unbranched filaments emerging from hostis surface. Reproductive structures of L. elsbetiae on the host were absent. On the contrary, free cultured individuals formed different reproductive structures. Macrozoosporangia containing a single large motile zoospore originated from vegetative cells, they were conical to cylindrical in shape, 30-50 ${\mu}m$ in length and 18-20 ${\mu}m$ in wide. Uniseriate plurilocular zoosporangia were cylindrical shape, 40 ${\mu}m$ in length and 10-13 ${\mu}m$ in wide. Sexual fusion was not seen. In mixed cultures of L. elsbetiae with R. pseudopalmata fronds, L. elsbetiae infected the host, grew as in natural host and, formed macrosporangia between host subcortical cells. Gametophytes of L. elsbetiae were filaments with diffuse growth, branched with a branch pattern alternate or opposite. Gametangia were plurilocular, uni or biseriate and lateral. When mature they contained 2 to 6 isogametes. The presence L. elsbetiae on R. pseudopalmata could be defined as an epi-endophytic relationship. The percentage of infection of R. pseudopalmata thalli by L. elsbetiae was 34%.A25% of the infected thalli presented a low, non-symptomatic level infection, whereas a 62% and a 13% of them exhibited respectively moderate and high indexes of infection.

• ALGAE
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2016

To examine the effects of two endophytic algae, Mikrosyphar zosterae (brown alga) and Ulvella ramosa (green alga), on the host Chondrus ocellatus (red alga), culture experiments were conducted. Four treatments were made: endophyte-free (Chondrus only), endophyte-M (Chondrus + Mikrosyphar), endophyte-U (Chondrus + Ulvella), and endophytes-M U (Chondrus + Mikrosyphar + Ulvella). After 3 weeks, the relative growth rates (RGRs) of frond lengths and the number of newly formed bladelets were examined. M. zosterae formed wart-like dots on C. ocellatus fronds, whereas U. ramosa made dark spots. The RGRs of frond lengths of C. ocellatus were significantly greater in the endophyte-free and endophyte-M treatment groups than in the endophyte-U and endophytes-M U treatment groups, indicating that the growth of host C. ocellatus was inhibited more by the green endophyte U. ramosa than the brown endophyte M. zosterae. The number of newly produced bladelets was greater in the endophyte-U and endophytes-M U groups than in the endophyte-free and endophyte-M treatment groups. These results indicate that the two endophytes inhibit growth of the host C. ocellatus. The negative effects of U. ramosa on C. ocellatus growth were more severe than those caused by M. zosterae. Furthermore, U. ramosa destroyed the apical meristems of C. ocellatus, whereas M. zosterae did not. On the other hand, C. ocellatus showed compensatory growth in the form of lateral branch production as U. ramosa attacked its apical meristems.

• Archives of Reconstructive Microsurgery
• /
• v.14 no.1
• /
• pp.57-62
• /
• 2005

Microvascular anastomosis with suture technique is a basic skill but there are several problems such as stenosis, thrombosis and long operating time. Recently plastic surgeons have developed non-suturing mechanical coupling devices for microvascular anastomosis. The authors applied non-penetrating vascular clips (VCS clips) in the field of free flap surgery of head and neck area. Between August of 2004 and January of 2005, we performed 9 free flaps (16 vessels) using small-sized VCS clips. Four stay sutures were applied first and then VCS clips were placed between sutures about 1 mm apart. Vascular pedicle of free flap included the descending branch of lateral circumflex femoral vessel, thoracodorsal vessel, deep inferior epigastric vessel and cephalic vein. The recipient vessels were the superior thyroid artery, superficial temporal artery, internal jugular vein, external jugular vein, and superficial temporal vein. We performed 13 end-to-end (4 arteries and 9 veins) and 3 venous end-to-side anastomoses. No flap related complication occurred but we applied additional clips or sutures in two cases due to blood leakage after completion of anastomosis. Primary patency rates seemed to be good and more rapid anastomosis could be done than conventional suture technique. Advantages of VCS technique are high patency rate, low thrombogenecity and rapidity. Although the high cost of VCS instrument may be a problem, this clip could be applied safely in microvascular free tissue transfer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7409-7414
• /
• 2015

Loop-mediated isothermal amplification (LAMP) developed by Notomi et al. (2000) has made it possible to amplify DNA with high specificity, efficiency and rapidity under isothermal conditions. The ultimate products of LAMP are stem-loop structures with several inverted repeats of the target sequence and cauliflower-like patterns with multiple loops shaped by annealing between every other inverted repeats of the amplified target in the similar strand. Because the amplification process in LAMP is achieved by using four to six distinct primers, it is expected to amplify the target region with high selectivity. However, evaluation of reaction accuracy or quantitative inspection make it necessary to append other procedures to scrutinize the amplified products. Hitherto, various techniques such as turbidity assessment in the reaction vessel, post-reaction agarose gel electrophoresis, use of intercalating fluorescent dyes, real-time turbidimetry, addition of cationic polymers to the reaction mixture, polyacrylamide gel-based microchambers, lateral flow dipsticks, fluorescence resonance energy transfer (FRET), enzyme-linked immunosorbent assays and nanoparticle-based colorimetric tests have been utilized for this purpose. In this paper, we reviewed the best-known techniques for evaluation of LAMP amplicons and their applications in molecular biology beside their advantages and deficiencies. Regarding the properties of each technique, the development of innovative prompt, cost-effective and precise molecular detection methods for application in the broad field of cancer research may be feasible.

• Korean Journal of Ichthyology
• /
• v.2 no.2
• /
• pp.149-158
• /
• 1990

The brook lamprey, Lampetra reissneri, was collected from an branch of the Nakdong River (Namwon-gun, Chollabuk-Do) and the Seomjin River (Hadong-Gun, Kyungsangnam-Do) from September, 1989 to April, 1990. Specimens were 95 individuals in number and composed of 21 ammocoetes, 16 metamorphosing animals and 58 adults which do not exceed 200mm in total length. The modal numbers of trunk myomer was 57.5, ranged from 55 to 60. In the dental formula, the supraoral tooth consistently had 2 cusps, and lateral circumorals were 3 in each side with 2 cusps. The infraoral had varying numbers of cusps ranging from 6 to 8. In morphological measurement of adults, prebranchial length was 10.3%, branchial length 9.7%, trunk length 51.3% and tail length 28.3% respectively, in hundreds of total length. No significant differences in morphological characteristics were observed between the two populations studied.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Archives of Plastic Surgery
• /
• v.39 no.1
• /
• pp.55-58
• /
• 2012

We experienced satisfactory outcomes by synchronously transplanting an artery and vein using an anterolateral thigh flap pedicle between the vascular pedicle and recipient vessel of a flap for scalp reconstruction. A 45-year-old man developed a subdural hemorrhage due to a fall injury. In this patient, the right temporal cranium was missing and the patient had $4{\times}3cm$ and $6{\times}5cm$ scalp defects. We planned a scalp reconstruction using a latissimus dorsi free flap. Intraoperatively, there was a severe injury to the right superficial temporal vessel because of previous neurosurgical operations. A 15 cm long pedicle defect was needed to reach the recipient facial vessels. For the vascular graft, the descending branch of the lateral circumflex femoral artery and two venae comitantes were harvested. The flap survived well and the skin graft was successful with no notable complications. When an interposition graft is needed in the reconstruction of the head and neck region for which mobility is mandatory to a greater extent, a sufficient length of graft from an anterolateral flap pedicle could easily be harvested. Thus, this could contribute to not only resolving the disadvantages of a venous graft but also to successfully performing a vascular anastomosis.

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.384-389
• /
• 2012

Background Numerous procedures are available for nipple reconstruction without a single gold standard. This study presents a method for reducing donor-site morbidity in nipple reconstruction using a composite nipple graft after transverse rectus abdominis musculocutaneous flap breast reconstruction. Methods Thirty-five patients who underwent nipple reconstruction using a composite nipple graft technique between July of 2001 and December of 2009 were enrolled in this study. To reduce the donor site morbidity, the superior or superior-medial half dome harvesting technique was applied preserving the lateral cutaneous branch of the fourth intercostal nerves. The patients were asked to complete a previously validated survey to rate the color and projection of both nipples, along with the sensation and contractility of the donor nipple; and whether, in retrospect, they would undergo the procedure again. To compare projection, we performed a retrospective chart review of all the identifiable patients who underwent nipple reconstruction using the modified top hat flap technique by the same surgeon and during the same period. Results Thirty-five patients were identified who underwent nipple reconstruction using a composite nipple graft. Of those, 29 patients (82.9%) responded to the survey. Overall, we received favorable responses to the donor site morbidity. Projection at postoperative 6 months and 1 year was compared with the immediate postoperative results, as well as with the results of nipples reconstructed using the modified top hat flap. Conclusions The technique used to harvest donor tissue is important. Preserving innervation of the nipple while harvesting can reduce donor site morbidity.