• 한국전산구조공학회논문집
• /
• 제30권3호
• /
• pp.249-254
• /
• 2017

본 논문에서는 가속도계와 속도계를 활용한 단기 동적변위 산정기법을 소개한다. 본 기법에서 변위는 측정된 가속도와 속도 데이터를 칼만필터 기반 실시간 융합 알고리즘에 적용하여 추정된다. 기존 변위센서(LVDT, LDV, Vision 등)는 고정된 지지점과 설치를 위해 별도의 가설물을 필요로 했기 때문에 지진 발생 시나 해상교량 적용에 한계가 있었다. 또한 Laser/Vision 기반 센서의 경우 시야확보가 어려운 경우 활용이 제한된다. 본 기법에서는 부착식 센서인 가속도계와 속도계를 활용하기 때문에, 고정된 지지점이 필요 없을뿐더러 부착만 되면 시야확보 여부로부터 자유롭다. 따라서, 지진, 해상교량뿐만 아니라 화재 시에도 적용 가능하다. 변위추정을 위해 누적되는 가속도의 이중적분 오차는 속도 계측치로 보정되며, 실험실 규모 테스트를 통해 해당 기법을 검증하였다.

• 로봇학회논문지
• /
• 제7권3호
• /
• pp.171-181
• /
• 2012

Outdoor mobile robots are faced with various terrain types having different characteristics. To run safely and carry out the mission, mobile robot should recognize terrain types, physical and geometric characteristics and so on. It is essential to control appropriate motion for each terrain characteristics. One way to determine the terrain types is to use non-contact sensor data such as vision and laser sensor. Another way is to use contact sensor data such as slope of body, vibration and current of motor that are reaction data from the ground to the tire. In this paper, we presented experimental results on terrain classification using contact sensor data. We made a mobile robot for collecting contact sensor data and collected data from four terrains we chose for experimental terrains. Through analysis of the collecting data, we suggested a new method of terrain feature extraction considering physical characteristics and confirmed that the proposed method can classify the four terrains that we chose for experimental terrains. We can also be confirmed that terrain feature extraction method using Fast Fourier Transform (FFT) typically used in previous studies and the proposed method have similar classification performance through back propagation learning algorithm. However, both methods differ in the amount of data including terrain feature information. So we defined an index determined by the amount of terrain feature information and classification error rate. And the index can evaluate classification efficiency. We compared the results of each method through the index. The comparison showed that our method is more efficient than the existing method.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.320-323
• /
• 2002

This paper presents a new generation of system for pressure vessel and shipbuilding. Typical pressure vessel and ship building weld joint preparations are either traditional V, butt, fillet grooves or have narrow or semi narrow gap profiles. The fillet and U groove are prevalently used in heavy industries and shipbuilding to melt and join the parts. Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be many hours. Although SAW and FCAW are normally a mechanized process, pressure vessel and ship structures welding up to now have usually been controlled by a full time operator. The operator has typically been responsible for positioning each individual weld run, for setting weld process parameters, for maintaining flux and wire levels, for removing slag and so on. The aim of the system is to develop a high speed welding system with multitorch for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. To achieve this, a laser vision sensor, a rotating torch and an image processing algorithm have been made. Also, the multitorch welding system can be applicable for the fine grained steel because of the high welding speed and lower heat input compare to a conventional welding process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.566-569
• /
• 2001

Hot Plate is the major unit that it used to remove damp of wafer surface, to strength adhesion of photoresist(PR) and to bake coated PR in FAB process of semiconductor. It is necessary to guarantee the performance of Hot Plate(HP). Therefore, in this study designed and developed the reliability system of HP to measure and estimated thermal uniformity and flatness in temperature setting amplitude $0~250^{\circ}C$. We developed the techniques that measures and analyzes thermal uniformity using infrared thermal vision, and compensates measuring error of flatness using laser displacement sensor. For measuring flatness, we specially makes the measurement stage of 3 axes which adopts the precision encoder. The allowable error of measuring technique is less than thermal uniformity, $\pm 0.1^{\circ}C$ and flatness, $\pm 1mm$. It is expected that the developed system can measure from $\Phi$210(wafer 8") to $\Phi$356(wafer 12") and also can be used in performance test of the Cool Plate and industrial heater, etc.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.933-934
• /
• 2006

High level perceptual tasks such as context understanding, SLAM and object recognition are essential for intelligent robot to provide services for human supports. Those intelligent robots often use camera sensor for vision information, sonar or laser sensor for range information, encoder for angular velocity of wheel and so on. The information is generated at different time intervals by the different H/W devices and S/W algorithms. The generation of high level information requires the specific mixture of low level information. And the information should be represented to be useful for robots to use in their ecological niche. In conventional robot systems, perceptual module requires the resource to use by tightly coupling whenever it is needed. So the resource and information cannot be easily shared and even could be invalid for the delayed information. In this paper, we propose a synchronization system of robot-centered information for context understanding. Our system represents information for the robot capacity and synchronizes the information that is asynchronously generated, where is employed the black-board architecture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.932-937
• /
• 2003

In this paper, we will explain about the unmanned vehicle control and modeling for combined obstacle avoidance and lane tracking. First, obstacle avoidance is considered as one of the important technologies in the unmanned vehicle. It is consisted by two parts: the first part includes the longitudinal control system for the acceleration and deceleration and the second part is the lateral control system for the steering control. Each system uses to the obstacle avoidance during the vehicle moving. Therefore, we propose the method of vehicle control, modeling and obstacle avoidance. Second, we describe a method of lane tracking by means of vision system. It is important in the unmanned vehicle and mobile robot system. In this paper, we deal with lane tracking and image processing method and it is including lane detection method, image processing algorithm and filtering method.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.15-23
• /
• 1996

용접은 힘든 작업환경 때문에 심한 인력난을 겪고 있는 3D 업종 중의 하나이 다. 특히 아크용접을 위해서는 숙련된 작업자가 필요하기 때문에 인력난은 더욱 심각 하다. 현장에서 젊은 작업자는 보기 힘들고 대부분의 작업자는 중년이상의 나이이다. 따라서 머지않아 많은 업체들이 인력난으로 조업을 중단해야 할 사태도 우려하지 않을 수 없는 형편이다. 이러한 문제점들을 해결할 수 있는 용접자동화는 최근 많은 관심을 끌고 있으며 이제 세계적인 추세가 되었다. 용접자동화의 이점은 무엇보다도 일정한 수준의 품질과 생산성에서 찾아볼 수 있다. 용접자동화에서는 가공자동화와는 달리 시스템의 자율성이 특히 중요하다. 작업조건의 설정, 용접봉의 위치와 방향 등은 전적 으로 컴퓨터와 센서시스템을 장착한 로봇에 의해 결정되어야 한다. 따라서 작업자들이 용접에 이용하는 각종 지능적인 능력을 습득하고 이를 각종 제어기와 센서로 모방하여 자율적으로 제어하는 인공지능기술을 응용하는 용접을 로봇의 개발에 관한 각종 연구 가 활발히 진행되고 있다.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.81-87
• /
• 2007

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. However, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis and artificial neural network were used as the research methods. And, the results of two prediction methods were compared and analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.516-519
• /
• 1996

Sub-assembly in ship manufacturing is a sequence of filet joint welding of stiffeners on metal panels and the process is different depending on companies. In this paper, we introduce a new intelligent robotic system of the sub-assembly process in Samsung Heavy Industry, where one shift of 22m * 9m workspace includes one to ten panels and each panel includes up to 10 stiffeners. The inherent problems such as several hundreds of different panels, unstructured task environment and the large scale do not allow a fixed automation, but needs highly intelligent versatile automation. The robotic system is composed of four 14DOF macro-mini robots and a task recognition system. Application of this system has verified the task specification such as low temperature environment(-10.deg. C) and productivity is satisfied successfully.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.737-743
• /
• 2011

서비스 로봇은 비전 카메라, 초음파 센서, 레이저 스캐너, 마이크로폰 등과 같은 다양한 센서를 장착하고 있다. 이들 센서들은 이들 각각의 고유한 기능을 가지고 있기도 하지만, 몇몇을 조합하여 사용함으로써 더욱 복잡한 기능을 수행할 수 있다. 음성영상 융합은 서로가 서로를 상호보완 해주는 대표적이면서도 강력한 조합이다. 사람의 경우에 있어서도, 일상생활에 있어 주로 시각과 청각 정보에 의존한다. 본 발표에서는, 음성영상 융합에 관한 두 가지 연구를 소개한다. 하나는 음원 방향 검지 성능의 향상에 관한 것이고, 나머지 하나는 음원 방향 검지와 얼굴 검출을 이용한 로봇 어텐션에 관한 것이다.