• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.285-287
• /
• 2009

When the laser diode is operated with continuous current, the light intensity from the laser diode deceases with time due to the temperature rise in the active layer. The phenomena, which is often called as DROOP, should be minimized in order to be used as a light source for the laser beam printer. We experimently examined the influences of the laser parameters such as threshold current, differential quantum efficiency on droop. It was found that decreasing the differential quantum efficiency of the laser diode is the effective way to minimize droop.

• 한국레이저가공학회지
• /
• 제18권4호
• /
• pp.6-11
• /
• 2015

Specially designed and 3D printed samples were prepared and joined by a diode laser source. To increase the strength of joining and reliability of samples, the surface was patterned by using a 3D printer. The joining surface was prepared as hemispherical shape with no-patterns, 0.5mm pitch, 0.75mm pitch and 1mm pitch. The optical properties of samples were measured by using an integrated sphere where classical Kubelka-Munk theory and modified Richard-Mudgetts theory for the analysis applied. Scanning speed was set at 500mm/min and laser power was varied between 9 and 10watts for the preliminary joining characteristic analysis.

• 한국광학회지
• /
• 제10권1호
• /
• pp.15-20
• /
• 1999

레이저 프린터의 핵심부품 중 하나인 LSu(Laser Scanning Unit)를 구성하는 광학부품 및 각 부품들의 역할에 대해서 살펴보았고, 각 부품별로 기초설계를 한 후 Code-V를 사용하여 최적설계를 했다. 특히 f$\theta$렌즈 설게시 기존제품들을 비교.분석하여 설계에 반영했다. 본 논문에서는 LSU의 저가격화 및 소형화를 위해, 초점거리가 136mm인 2매의 플라스틱 f$\theta$렌즈로 구성된 LSU용 광학계를 설계하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.676-677
• /
• 2010

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.202-205
• /
• 1986

In this paper, real-time vibration measurement using system is described. Modes getting from different vibrational frequencies of come vibrational plates are rectified and filtered by digitizer and recorded 488 dots(abscissa) printer. PZT and mechanical chopper is placed in front of cw laser for better resolving power. Rayleigh`s mode theory and mode pattern are compared with experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.887-890
• /
• 1997

Recently micromachining using DPSSL(Diode Pumped Solid State Laser) with 3rd harmonic wavelength is actively studied in laser machining area. Micromachining using DPSSL have outstanding advantages as UV source comparing with excimer laser in various aspect such a maintenance cost, maskless machining, high repetition rate and so on. In this study micro-drilling of PCB type substrate which consists of Cu-PI-Cu layer was performed using DPSS Nd:YAG laser(355nm, wavelength) in vector scanning method. Experimental and numerical method(Matlab simulation, FEM) are used to optimize process parameter and control machining depth. The man mechanism of this process is laser ablation. It is known that there is large gap between energy threshold of copper and that of PI. Matlab simulation considering energy threshold of material is performed to effect of duplication of pulse and FEM thermal analysis is used to predict the ablation depth of copper. This study could be widely used in various laser micromachining including via hole microdrilling of PCB, and micromachining of semiconductor components, medical parts and printer nozzle and so on.

• 한국레이저가공학회지
• /
• 제17권4호
• /
• pp.14-19
• /
• 2014

Laser beam was applied on the boundary of the polyurethane and biodegradable polyacetate polymers. The distributed laser passed through the polyurethane layer and heated the polyacetate layer, then the soften acetate was squeezed thorough the 1mm square slots of polyurethane for the mechanical joining. The surface roughness ranging between $0.28{\mu}m$ and $3.06{\mu}m$ had almost no effect on joining strength, but the optical properties of HD (High Definition) and UHD (Ultra High Definition) mode affected laser beam transmittance. The optimum laser power was found to be between 8watt and 10watt with 500mm/min of scanning speed. The joining boundary was characterized by optical and SEM analysis. Based on the experiment and characterization results, the laser energy was effective for the polymer joining and efficiency of joining.

• Tribology and Lubricants
• /
• 제23권3호
• /
• pp.103-108
• /
• 2007

In this paper, the optimized design and strength analysis have been presented based on the finite element and Taguchi's experimental methods. The stress, strain and displacement characteristics of OPC drum tubes are affected by rolling contact pressures between an OPC drum tube and a paper, design parameters of an aluminum tube and material properties. The OPC drum tubes with nine different geometrical models are analyzed for design parameters that are related to the outer diameter, the thickness, and the length of an aluminum tube for a toner cartridge. The optimized design parameters for an aluminum tube may be selected as the outer diameter of 28 mm, the thickness of 0.8 mm, and the length of 220 mm. But the currently used aluminum tube for a laser printer is fairly optimized based on the Taguchi's design analysis. The calculated FEM results showed that the affection ratio of the design parameter t, which may control the strength of an aluminum tube, is the most influential parameter among the length and an outer diameter of a tube.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.49-54
• /
• 2015

The fabrication of a focal length-correcting lens called the F-theta lens was performed by a 3D printer. The fabricated lenses were characterized by transmittance and reflectance measurements. The optical properties of the lens, such as scattering or transmittance efficiency, were analyzed with respect to the wavelength (red, green, and blue) and the surface roughness of the lens. There was almost no shape aberration on the focus location of 0 degrees, but elliptical focus shapes were found at 1 and 2 degrees of the laser incidence angle. The developed process is expected to be used for the quick fabrication of lenses with low costs and quick turn-out. By improving the surface roughness during postprocessing, the optical properties are expected to be comparable to commercial lens quality.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.1-7
• /
• 2020

This study examines the processing and performance of an f-theta lens, one of the main components used in laser printer and laser scanning systems. To design an f-theta lens, the optical path of the components of the laser scanning unit f-theta lens, cylinder lens, and collimator lens must be identified. The goal after machining the master f-theta lens is to understand the optical properties, root mean square, and peak to valley.