• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.288-290
• /
• 1997

Pulsed laser ablation has been used to fabricate superconducting $YBa_2Cu_3O_{7-x}$(YBCO) thin films on MgO substrates. The epitaxial YBCO thin films were grown at $750^{\circ}C$ and oxygen partial pressure of 200 mTorr. The electrical property and the characteristics of the YBCO thin films have been studied by R-T measurement. scanning electron microscopy (SEM) and X-ray diffraction (XRD). A microstrip line resonator has been fabricated using YBCO superconducting thin films by photolithography and wet-etch process. The resonator has linear microstrip line separated by a gap of 0.278 mm. We observed a fundamental resonance peak at the frequency of 10.007 GHz.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.125-133
• /
• 2018

We report an in-depth analysis of the design and fabrication of multilayer dielectric (MLD) diffraction gratings for spectral beam combining at a wavelength of 1055 nm. The design involves a near-Littrow grating and a modal analysis for high diffraction efficiency. A range of wavelengths, grating periods, and angles of incidence were examined for the near-Littrow grating, for the $0^{th}$ and $-1^{st}$ diffraction orders only. A modal method was then used to investigate the effect of the duty cycle on the effective indices of the grating modes, and the depth of the grating was determined for only the $-1^{st}$-order diffraction. The design parameters of the grating and the matching layer thickness between grating and MLD reflector were refined for high diffraction efficiency, using the finite-difference time-domain (FDTD) method. A high reflector was deposited by electron-beam evaporation, and a grating structure was fabricated by photolithography and reactive-ion etching. The diffraction efficiency and laser-induced damage threshold of the fabricated MLD diffraction gratings were measured, and the diffraction efficiency was compared with the design's value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.432-432
• /
• 2009

본 연구에서는 HW-PLD(Hot-walled Pulsed Laser Deposition) 법을 이용하여 ZnO 나노와이어를 $Al_2O_3$ 기판 위에 성장하였다. 성장된 ZnO 나노와이어는 SEM, XRD, PL 분석을 통하여 구조적 특성을 확인하였으며, 성장된 나노와이어를 photolithography 공정을 통하여 FET(Field Effect Transistor)소자를 제작하였다. 제작된 소자의 I-V 특성 측정 결과 Ti/Au 전극과 ZnO nanowire 채널 간에 ohmic 접합이 형성된 것을 확인하였으며 게이트 전압의 증가에 따라 소스와 드레인 사이의 전류가 증가하는 전형적인 n-type FET소자 특성을 나타내었다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.503-507
• /
• 2002

Mask manufacturing is a high COC and COO process in developing of semiconductor devices, because of the mass production tool with high resolution. Direct writing has been thought to be one of the patterning method to cope with development or small-lot production of the device. This study focused on the development of the direct, mastless patterning process using stereolithography tool for the easy and convenient application to micro and miso scale products. Experiments are utilized by three dimensional CAD/CAM as a mask and photo-curable resin as a photo-resist in a conventional stereo-lithography apparatus. Results show that the resolution of the pattern was achieved about 300 micron because of complexity of SLA apparatus settings, inspite of 100 micro of inherent resolution. This paper concludes that photo resist and laser spot diameter should be adjusted to get finer patterns and the proposed method is significantly feasible to mastless and low cost patterning with micro and miso scale.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.123-126
• /
• 2004

We have demonstrated the fabrication of patterned 3D photonic crystals by holographic lithography in conjunction with soft lithography. Holographic lithography created 3D ordered macroporous structures and soft lithography made tailored defects. Because the hard baked photoresist pattern possessed high resistance against the uncured photoresist solution and the refractive index did not change appreciably by hard baking, a crosslinked photoresist was used as a relief pattern for the holographic fabrication of patterned 3D photonic crystals. More complicated defect geometries might be easily obtained with more complicated patterns on PDMS stamps. Moreover, the present results might be used as templates for 3D PCs of highindex defects that can be exploited as optical waveguides and optical circuits.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.19.2-19.2
• /
• 2011

ZnO nanowires have been fabricated by vapor-liquid-solidification with hot-walled pulsed laser deposition method. The diameter of ZnO nanowire has been systematically controlled simply by changing the thickness of Au catalyst. Field effect transistors with different diameter have been fabricated by using photolithography and e-beam lithography. The threshold voltage of ZnO nanowire FET showed enhanced mode and depleted mode depending on the diameter of ZnO nanowires. This is mainly due to the change of the carrier concentration depending on the size of nanowires. We have fabricated ZnO nanowire inverters using nanowire FETs. This simple method to fabricate ZnO nano-inverter will be useful to open the possibility of ZnO nanoelectronic applications.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.13-16
• /
• 2005

High temperature superconductor, $\YBa_2Cu_3O_{7-x}$ (YBCO) and ferroelectric, $\Ba_{0.1}Sr_{0.9}TiO_{3}$ (BST) multilayer thin films were deposited using on MgO(100) substrates pulsed laser deposition. The thin films exhibited only (001) peaks of YBCO and 1357 The HTS thin films demonstrated excellent zero resistance temperature of 92.5 K. We designed and fabricated HTS ferroelectric phase shifter using high frequency system simulator and standard photolithography method, respectively The HTS phase shifter shows a low insertion loss (2.97 dB) and large phase change ($\162^{circ}$) with 40 V do bias at 10 GHz. The HTS phase shifter shows 54 of figure of merit. These results can be applicable to phased anay antenna system for satellite communication services.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.934-937
• /
• 2001

It is well-known that the micro fabrication technology of micro parts are the high energy beam or silicon-based micro machining method such as LIGA Process, Laser machining, photolithography and etching technology. But, for fabricating complex 3-D structure it is better to use mechanical machining. This machining method by the mechanical machine tool with nanometer accuracy is getting attention in some field-especially micro optics machining such as grating, holographic lens, micro lens array, fresnel lens, encoder disk etc.. In this study, we survey the micro fabrication by mechanical cutting method and set up the mechanical micro machining system. And we carried out micro cutting experiments for micro parts with v-shape groove.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.184-188
• /
• 2000

We have fabricated directly-coupled single-layer second-order high-Tc SQUID gradiometer. The gradiometer consisted of 3 parallel-connected square pickup loops, and each loop was directly coupled to SQUID. YBCO thin film was deposited by pulsed laser deposition and patterned by photolithography with ion milling technique. Optimum balancing condition was achieved by varying the outer diameter of the center loop. We have investigated nearly zero response of the SQUID to uniform and 1 st-order field gradient.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.60-64
• /
• 2001

We have studied properties of step-edge Junction prepared with crystal orientation of sapphire substrate. The Step on sapphire substrates fabricated by conventional photolithography method and Ar ion milling method. $CeO_2$ buffer layer and in-situ YBCO thin film were deposited on the stepped sapphire substrates by a pulsed laser deposition method with the predetermined optimized condition. The step angle was centre fled low angle of about $25^{\circ}$. The YBCO film thickness was varied to obtain various thickness ratios of the film to the step height in a range from 0.7 to 1.2. I-V curves of junction were showed RSJ-behavior, double junction structure, and hysteresis due to the crystal orientation of substrate.