• 한국레이저가공학회지
• /
• 제14권4호
• /
• pp.21-27
• /
• 2011

In this work, we have studied on time-resolved transient reflective image of single crystalline Si surface after single-shot fs-laser irradiation with varying the laser fluence under two different laser spot sizes. The temporal profiles of transient reflectivity changes as well as its maximum values at the early delay time were found to be strongly dependent on both the laser beam spot size and laser fluence. We have interpreted the dependence of transient reflectivity changes on the laser spot size in terms of a relaxation of the generated free carriers to the bulk silicon, which should be interacted with the plasma.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.62-67
• /
• 2004

In this paper, we present the new method for joint aspect inspecting system. We use the image processing and laser maker for light source. We can find the matrial joint status through processing the line pattern which is made by laser maker. To get the line pattern, in first, we had done the preprocss of threshold. If the shape of line had over two segments, then the joint status is abnormal. We show our system efficency by experiment on tire facility.

• 전자공학회논문지 IE
• /
• 제45권2호
• /
• pp.20-27
• /
• 2008

본 논문에서는 TFT-LCD 편광필름의 결함을 검출하기 위한 새로운 영상처리기법을 제안한다. 레이저 반사광을 이용하여 획득한 편광필름 영상에서 우선 배경잡음을 제거하기 위하여 형태론적 영상처리기법(열림, 닫힘)을 사용한다. 배경잡음이 제거된 영상으로부터 결함을 검출하기 위하여 2차원 LMS 적응 예측기를 사용하여 밝은 결함을 검출하고 통계적 특성을 이용하여 어두운 결함을 검출한다. 산업현장에서 제공된 TFT-LCD 편광필름을 사용하여 제안된 기법의 성능을 평가한다.

• 한국산업정보학회논문지
• /
• 제16권1호
• /
• pp.21-30
• /
• 2011

본 논문에서는 인간-컴퓨터 상호작용 시스템 구현을 위해 신경망 알고리즘을 적용하여 스크린 상의 레이저포인터를 효과적으로 검출하는 방법을 제안하였다. 제안된 신경망 알고리즘은 먼저 레이저포인터가 없는 입력 카메라 영상의 패치들을 학습시킨다. 학습된 선경망은 카메라 영상으로부터 얻은 입력 패치에 대해 출력 값을 발생시킨다. 만약 미세한 레이저빔의 변화가 입력영상에 감지되면 이를 증폭시켜 레이저 빔을 검출하는 역할을 한다. 제안된 시스템은 레이저포인터, 싼 가격의 웹캠 그리고 영상처리 프로그램으로 구현할 수 있다. 그리고 레이저포인터와 컴퓨터의 배경화면 색상이 유사한 경우에도 레이저포인터를 검출할 수 있는 장점이 있으므로 인간-컴퓨터 상호작용 시스템의 성능개선에 기여할 것이다.

• 한국레이저가공학회지
• /
• 제10권4호
• /
• pp.18-22
• /
• 2007

In this paper, we suggested the femtosecond laser processing using the mask which makes Gaussian spatial beam distribution to a normalized distribution by Fresenel diffraction. Holography pattern of the size of $320{\times}320{\mu}m^2$ on the Cr thin film on glass substrate with a pixel size of $5{\times}5{\mu}m^2$ was fabricated according to the pattern generated by the iterative Fourier transform algorithm(IFTA) algorithm. We analysed the damage threshold with an assumption the power distribution as Gaussian profile as 45 $mJ/cm^2$. The regenerated image of letters through the diffractive pattern was well recognized at the screen.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.1-123
• /
• 2001

For Autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use an sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate $\pm$ $30{\Circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center poings. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.123.5-123
• /
• 2001

For autonomous navigation of the mobile robots, the robots' capability to recognize 3D environment is necessary. In this paper, an on-line 3D map building method for autonomous mobile robots is proposed. To get range data on the environment, we use a sensor system which is composed of a structured light and a CCD camera based on optimal triangulation. The structured laser is projected as a horizontal strip on the scene. The sensor system can rotate$\pm$30$^{\circ}$ with a goniometer. Scanning the system, we get the laser strip image for the environments and update planes composing the environment by some image processing steps. From the laser strip on the captured image, we find a center point of each column, and make line segments through blobbing these center points. Then, the planes of the environments are updated. These steps are done on-line in scanning phase. With the proposed method, we can efficiently get a 3D map about the structured environment.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.122-130
• /
• 2010

This paper presents an active ranging system based on laser structured-light image. The structured-light image processing is computationally efficient in comparison with the conventional stereo image processing, since the burdensome correspondence problem is avoidable. In order to achieve robustness against environmental illumination noise, an efficient image processing algorithm, i.e., integration of difference images with structured-light modulation is proposed. Distance equation from the measured structured light pixel distance and system parameter calibration are addressed in this paper. Experiments and analysis are carried out to verify performance of the proposed ranging system.

• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.47-55
• /
• 1990

This paper presents experimental results which explore the capability of a CW laser speckle photography for tile measurement of in-plane displacement at high temperature. The serious restrictions on the application of the method seem to be the ambient air turbulence and the change of surface texture caused by the oxidation, as they tend to decorrelate the double exposured speckle patterns. In order to assess only the effect of air turbulence, a ceramics-coated stainless steel plate is heated in air and Ar-laser specklegrams are made with combination of temperature and lateral translation displacement. The slight reduction in visibility of Young's fringes is observed at $1000^{\circ}C$. The analyses of Young's fringes are carried out by a image processing system using a TV-camera and computers, and the result agrees well with the micrometer reading. Futhermore, uncoated stainless steel and Hastelloy X plates are tested and the effect of oxidation is also evaluated. The experimental results demonstrate that a CW laser speckle photography is applicable at temperatures up to $1000^{\circ}C$.

• 한국정보통신학회논문지
• /
• 제13권3호
• /
• pp.594-601
• /
• 2009

모의 사격 시스템은 군사 훈련에 드는 많은 비용과 시간을 줄일 수 있음은 물론이고 사고의 위험을 배제할 수 있다. 특히 레이저를 이용한 모의 사격 시스템은 실탄을 사용한 훈련과 거의 유사한 환경을 제공할 수 있다는 장점을 가지고 있다. 그러나 이러한 시스템을 구현하기 위해서는 레이저빔을 인식하기 위한 효과적인 영상처리기법의 개발이 필요하다. 본 연구에서 제안하는 방법은 인접한 두 영상에서 차 영상을 구하고 이 차 영상에서 빔을 배경과 구분하기 위해서 쓰레쉬홀딩 방법을 적용하였다. 이때 쓰레쉬홀드 값은 배경을 이루는 점들의 밝기 분포가 정규분포를 이룬다는 가정 하에 결정한다. 이 결과에 잡음제거와 영역분리 과정을 거쳐서 빔의 영역을 정한다. 이 영상처리 방법의 계산 복잡도는 영상의 크기와 잡음제거를 위해 사용한 마스크의 크기를 곱한 값에 비례한다. 실험에서 제안한 방법은 93.3%의 정확도를 보였다. 또한 부정확한 결과가 나오는 경우에도 항상 빔을 포함하여 영역을 잡는 것을 확인할 수 있었다.