• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.965-970
• /
• 2010

NC-OFDM(Non-Contiguous Orthogonal Frequency Division Multiplexing) 기반의 무선 통신 시스템은 많은 부반송파의 수로 인해 높은 PAPR(Peak-to-Average Power Ratio)을 갖는다. Comb type pilot은 시변 채널 추정에 있어서 block type pilot보다 낮은 계산 복잡도를 가지며 더 효율적이다. 그러나 CAZAC(Constant Amplitude Zero Auto-Correlation) 행렬 변환이 뛰어난 PAPR 저감 효과를 보임에도 불구하고, comb type pilot이 데이터 심볼에 삽입되게 되면 PAPR이 다시 증가하는 문제가 있다. 따라서, 본 논문에서는 이러한 comb type pilot 배치로 인해 증가된 PAPR을 개선하기 위해 추가적으로 새로운 방식의 SLM(Selective Mapping)을 적용하였다. 또한, 본 논문에서 사용된 새로운 방식의 SLM 기법은 일반적인 SLM 기법과 달리, SLM의 선택 정보를 전송하기 위한 추가적인 대역폭을 사용하지 않음으로써 대역 효율을 높인다. 따라서, 본 논문에서 제안된 시스템은 제한된 주파수 대역을 이용하여 고효율의 데이터 전송을 얻을 수 있다.

• 한국대기환경학회지
• /
• 제33권2호
• /
• pp.174-183
• /
• 2017

The background level and timely variation characteristics of atmospheric $^{222}Rn$ concentrations have been evaluated by the real time monitoring at Gosan site of Jeju Island, Korea, during 2008~2015. The average concentration of atmospheric radon was $2,480mBq\;m^{-3}$ for the study period. The cyclic seasonality of radon was characterized such as winter maximum and summer minimum, consistent with the reduction in terrestrial fetch going to summer. On monthly variations of radon, the mean concentration in October was the highest as $3,041mBq\;m^{-3}$, almost twice as that in July ($1,481mBq\;m^{-3}$). The diurnal radon concentrations increased throughout the nighttime approaching to the maximum ($2,819mBq\;m^{-3}$) at around 7 a.m., and then gradually decreased throughout the daytime by the minimum ($2,069mBq\;m^{-3}$) at around 3 p.m. The diurnal radon cycle in winter showed comparatively small amplitude due to little variability in atmospheric mixing depth, conversely, large amplitude was observed in summer due to relatively a big change in atmospheric mixing depth. The cluster back-trajectories of air masses showed that the high radon events occurred by the predominant continental fetch over through Asia continent, and the radon concentrations from China continent were about 1.9 times higher on the whole than those from the North Pacific Ocean. The concentrations of $PM_{10}$ also increased in proportion to the high radon concentrations, showing a good linear correlation between $PM_{10}$ and radon concentrations.

• 지질공학
• /
• 제6권2호
• /
• pp.59-64
• /
• 1996

암석 시료가 파괴될 때에 발생되는 AE신호는 미세한 균열 발생시의 갑작스런 변형에너지 해바에 기인한다. 압전 압력형 탐촉자와 다채널 기록장치를 이용하여 AE 신호파를 기록하여 분석하므로 외적인 하중조건과 그에 따른 미세균열의 특징에 대하여 연구하였다. 연구결과 미세균열의 체적은 수 $\mu\textrm{m}^3$ 내지 $150,000\mu\textrm{m}^3$로 산출되어서 그 크기가 넓은 범위로 분포하였고 인장형 미세균열이 대체적으로 전단형 보다 큰 체적을 보였다. 또한, 균열원에서의 에너지 강도는 모드 I 하중조건하에서 발생하는 AE 신호가 혼합모드 조건하에서 발생한 신호보다 약 3배정도 크게 나타났으나,시료가 파괴되는 동안 기록된 AE 신호의 숫자는 반대로 모드 I의 경우가 혼합모드의 25%에 불과하였다. 이러한 사실은 같은 크기의 파괴면을 형성하는데 필요한 에너지 요구량이 대체적으로 동일함을 암시하는 것으로 보인다.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1518-1528
• /
• 1993

본 연구는 단일 원주의 와여기 진동특성에 관한 연구의 연속연구로서 풍동내 에 직렬로 배열된 두 원주의 직교유동에 의한 두 가지 경우의 동적 거동을 조사하였다. 첫째는 상류측 탄성지지 원주의 후류내에 가깝게 놓여진 하류측 고정원주의 간섭에 의한 상류측 원주의 진동(proximity-induced vibration)이며, 둘째는 상류측의 고정원 주의 후류내에 가깝게 놓여진 하류측 탄성지지 원주의 공기역학적 진동(wake-induced vibration)이다. 본 연구의 목적으로 직렬로 배열된 동일 직경의 두 원주에 있어서 어느 한 쪽의 원주가 탄성지지가 되어 있을 경우, 두 원주사이의 간격과 유속변화에 따른 와여기 진동과 유력탄성 불안정 진동의 진동특성 및 후류내에서의 와유출 특성을 명확히 하기 위해 실험적으로 조사, 연구하였다.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.8-12
• /
• 2011

As the aged population grows around the world, many medical instruments and devices have been developed recently. Among the devices, a drug delivery stent is a medical device which requires precision machining. Conventional drug delivery stent has problems of residual polymer and decoating because the drug is coated on the surface of stent with the polymer. If the drug is impregnated in micro hole array on the surface of the stent, the problem can be solved. Micro sized holes are generally fabricated by laser machining; however, the fabricated holes do not have an enough aspect ratio to contain the drug or a good surface finish to deliver it to blood vessel tissue. To overcome these problems, we propose a vibration-assisted machining mechanism with PZT (Piezoelectric Transducers) for the fabrication of micro sized holes. If the mechanism vibrates the eyepiece of the laser machining head, the laser spot on the workpiece will vibrate vertically because objective lens in the eyepiece shakes by the mechanism's vibration. According to the former researches, the vibrating frequency over 20kHz and amplitude over 500nm are preferable. The vibration mechanism has cylindrical guide, hollowed PZT and supports. In the cylinder, the eyepiece is mounted. The cylindrical guide has upper and low plates and side wall. The shape of plates and side wall are designed to have high resonating frequency and large amplitude of motion. The PZT also is selected to have high actuating force and high speed of motion. The support has symmetrical and rigid characteristics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.

• Earthquakes and Structures
• /
• 제1권4호
• /
• pp.327-344
• /
• 2010

This paper summarizes results of a comprehensive analytical study aimed at evaluating the influence of strong ground motion duration on residual displacement demands of single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems. For that purpose, two sets of 20 earthquake ground motions representative of short-duration and long-duration records were considered in this investigation. While the influence of strong ground motion duration was evaluated through constant-strength residual displacement ratios, $C_r$, computed from the nonlinear response of elastoplastic SDOF systems, its effect on the amplitude and height-wise distribution of residual drift demands in MDOF systems was studied from the response of three one-bay two-dimensional generic frame models. In this investigation, an inelastic ground motion intensity measure was employed to scale each record, which allowed reducing the record-to-record variability in the estimation of residual drift demands. From the results obtained in this study, it was found that long strong-motion duration records might trigger larger median $C_r$ ratios for SDOF systems having short-to-medium period of vibration than short strong-motion duration records. However, taking into account the large record-to-record variability of $C_r$, it was found that strong motion duration might not be statistically significant for most of the combinations of period of vibration and levels of lateral strength considered in this study. In addition, strong motion duration does not have a significant influence on the amplitude of peak residual drift demands in MDOF systems, but records having long strong-motion duration tend to increase residual drift demands in the upper stories of long-period generic frames.

• The Korean Journal of Physiology
• /
• 제19권2호
• /
• pp.113-125
• /
• 1985

Electrophysiological difference of the central and peripheral area of the sinoatrial node in the rabbit was studied by glass microelectrode technique. Effects of $K^+,\;Na^+,\;Cs^+,$ adrenaline and ouabain on the action potential of the two areas were investigated, and transient hyperpolarization ($K^+-induced$ hyperpolarization) which developed following readmission of potassium after having pre-treated with $K^+-free$ Tyrode solution for 10 minutes was analyzed. The results obtained were as follows ; 1) The frequency of the spontaneous action potential recorded in the periphery of the SA node was faster than the central area. Reduction by $Cs^+$ and increase by O mM $K^+$, $10^{-6}M$ adrenaline and $10^{-6}M$ ouabain in the frequency of action potential were noticed more prominently in the peripheral than the central area. On the contrary, the frequency in the central area was more decreased than the Peripheral area by 13 mH $K^+$ and 1 mM $Co^{2+}$. 2) The amplitude of the K+_induced hyperpolarization was very small in the central area but large in the peripheral area. Transient hyperpolarization was abolished by ouabain and low sodium, and decreased by cooling the tissue $(17^{\circ}C)$. 3) By changing the concentration of $Ca^{2+}$ in the perfusate, the amplitude and the rate of transient hyperpolarization were increased in the high $Ca^{2+}$ concentration. It could be concluded that the central area of the SA node is less susceptible to the inhibition of Na-Pump and more susceptible to Ca-blocker and high concentration of $K^+$. The Na-Pump activity of the central area measured by means of transient hyperpolarization is found to be much less active than that of the peripheral area.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.54-61
• /
• 2013

사장교 케이블은 초기 큰 인장력으로 축강성이 매우 크지만, 횡방향 휨강성은 약하다. 풍하중이나 교통하중은 케이블을 심각하게 진동시켜 사장교의 사용성에 부정적 영향을 끼친다. 그러므로 장대교량에 감쇠장치를 설치하는 진동 저감 계획이 절실히 요구된다. 마찰댐퍼는 교통하중이나 풍하중과 같은 동적하중이 작용하는 케이블 진동에서 진폭과 지속시간을 대폭 감소시킬 수 있는 효과적인 장치임을 알 수 있다. 케이블 진동은 댐퍼제작방법과 설치위치 및 형상에 따라 효율이 달라질 수 있다. 그럼에도 불구하고 본 실험연구의 마찰댐퍼 설치전 후 제진성능효과 분석결과는 향후 사장케이블의 진동을 저감시키는 기본 자료로 활용할 수 있다.

• 한국전산구조공학회논문집
• /
• 제16권1호
• /
• pp.33-42
• /
• 2003

본 논문에서는 2차원 사각탱크내 비압축성, 비점성, 비회전 유동에 대한 비선형 슬로실 해석을 다룬다. 유체영역의 지배방정식으로 포텐셜 이론에 기반을 둔 라플라스 방정식을 사용한다. 대변형의 슬로싱 거동을 표현하기 위하여 베르누이 방정식으로부터 유도된 운동 및 동역학적 자유표면 경계조건을 적용한다. 이러한 비선형 슬로싱 문제는 9결점 요소를 사용한 유한요소법에 의하여 해석되어 진다. 경계조건에 대한 시간적분과 정확한 속도계산을 위하여 각각 예측자-수정자 기법 및 최소자승법을 도입하였다. 또한, 자유표면 추적에서 야기되는 안정성 문제는 시간변동에 대한 자유표면 위치를 직접 계산함으로써 확보할 수 있었다. 외부 조화가진에 대한 본 논문의 결과는 선형이론해 또는 참고문헌의 결과와 비교하여 매우 정확하고 안정적이었다. 프로그램 검증 후, 유체높이와 가진크기에 대한 슬로싱 응답특성을 분석하였다.