• Bulletin of the Korean Chemical Society
• /
• 제17권10호
• /
• pp.885-892
• /
• 1996

The effects of NOx reduction by advanced fuel staging in a small scale combustor (6.6 kWT) have been investigated using propane gas flames laden with ammonia as fuel-nitrogen. The variables which had the greatest influence on NOx reduction were temperature, reducing stoichiometry (relate to main combustion zone stoichiometry, air fraction and reburning fuel fraction) and residence time of reducing zone. NOx reduction was best at the reburning zone temperature of above 1,000 ℃ and reburning zone stoichiometry was 0.85. In terms of residence time of the reburning zone, NOx reduction was effective when burnout air was injected at the point where the reburning zone had been already established. In the advanced fuel staging NOx reduction was relatively large at the burning of higher Fuel-N concentration in the fuel. Under optimum reburning conditions, fuel nitrogen content had a relatively minor impact on reburning efficiency.

• 한국환경과학회지
• /
• 제27권6호
• /
• pp.359-369
• /
• 2018

A model has been developed to predict natural ventilation in a single zone building with large openings. This study first presents pressure-based equations on natural ventilation, that include the combined effect of wind and thermal buoyancy. Moreover, the concept of neutral pressure level(NPL) is introduced to consider the two-way flow through a large opening. The total pressure differences across the opening and the NPL are calculated, and nonlinear equations are solved to find the zonal pressure to satisfy mass conservation. For this analysis, an iterative technique of successively approximating the zonal pressure is used. The results of applying this study model to several simple cases are as follows. When there is no wind and only the stack effect is caused, a one-way flow occurs in both the top and bottom openings in the case of two openings of equal-area, and a one-way flow occurs in the top opening; however, a two-way flow occurs in the bottom opening in the case of two openings of unequal-area. When there is a wind effect, regardless of whether the outside air temperature is lower or higher than the indoor air temperature, air flows into the room through the bottom opening and out of the room through the top opening. As the wind velocity increases, the wind effect appears to be more influential than the stack effect owing to the temperature difference.

• 터널과지하공간
• /
• 제21권4호
• /
• pp.251-263
• /
• 2011

대단면 터널의 안전한 시공을 달성하기 위해서는 굴착암반의 공학적 특성 및 단층 등과 같은 구조지질적인 특성에 대한 파악이 무엇보다 중요하다. 본 현장은 운모 편암내에 대규모 스러스트 단층이 존재하고 있어, 대단면 터널 굴착시 터널의 안정성에 매우 심각한 영향을 미치는 지질공학적 리스크가 특히 큰 현장이라고 할 수 있다. 본 연구에서는 스러스트 단층의 구조지질적 분포 특성 및 단층암의 공학적 특성에 대한 지반조사결과를 바탕으로 터널낙반의 원인과 메카니즘을 분석하고, 이를 바탕으로 대단면 터널의 안전한 재시공을 위한 합리적인 보강대책을 수립하였다.

• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.75-87
• /
• 2018

The Baekdu volcano (2,750 m a.s.l.) is located on the border between Yanggando Province in North Korea and Jilin Province in China. Its eruption in 946 A.D. was among the largest and most violent eruptions in the past 5,000 years, with a volcanic explosivity index (VEI) of 7. In this study, we processed and analyzed lahar-inundation hazard zone data, applying a geographic information system program with menu-driven software (LAHARZ)to a shuttle radar topography mission 30 m digital elevation model. LAHARZ can simulate inundation hazard zones created by large lahar flows that originate on volcano flanks using simple input parameters. The LAHARZ is useful both for mapping hazard zones and estimating the extent of damage due to active volcanic eruption. These results can be used to establish evacuation plans for nearby residents without field survey data. We applied two different simulation methods in LAHARZ to examine six water systems near Baekdu volcano, selecting weighting factors by varying the ratio of height and distance. There was a slight difference between uniform and non-uniform ratio changes in the lahar-inundation hazard zone maps, particularly as slopes changed on the east and west sides of the Baekdu volcano. This result can be used to improve monitoring of volcanic eruption hazard zones and prevent disasters due to large lahar flows.

• 한국환경생태학회지
• /
• 제29권1호
• /
• pp.81-87
• /
• 2015

This study was carried out in the peatland for estimating the paleoenvironment based on the analysis from its fossils plant and radiocarbon at the Hwayang-ri, Hyeondeok-myeon, Pyeongtaek-city, South Korea. Variety of fossil was collected from the peatland which could discriminated with naked eye and sorted into seeds, leaves, stems from four-stage of standard sieve. During analysis for the large plant fossil within the peatland, the dead plants were largely divided into 3 fossil zones according to its peatland. In the fossil zone III (the oldest layer; 6,970~6,070 yr $C^{14}$ B.P.), the observation of leaves of hydrophyte such as Trapa sp. and stems of Alnus japonica which appeared in wetland means that the environment was influenced by the climate changes such as rainfall increasing and sea level rise. In the fossil zone II (the middle layer; 6,070~5,800 yr C14 B.P.), the occurrence of Gramineae, Cyperaceae and Fagaceae indicate that the environmental condition might be more or less dry by decreasing rainfall and drop in sea level. The fossil zone I (the recent layer; 5,800~4,540 yr $C^{14}$ B.P.) where lots of herbaceous plants, increasing of Fagaceae, decreasing of A. japonica. and distribution of Pinaceae were showed, was inferred to be repeated both dry and wet environment due to human disturbance.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.468-474
• /
• 2006

In the secondary settling tanks, three different types of settling phenomena occurs; i.e., zone settling for sludge thickening in the bottom part of settling tank, and discrete and flocculent settling for clarification in the upper part. In this paper, morphological parameters of the floc in sludge blanket layers along the length of a long rectangular tank were investigated. The plant used for this study had a serious bulking problem caused by Microthrix parvicella. Floc size decreased as the surface area of settling tank increases, which indicates that in the secondary settling tank where zone settling believed to be predominant, free or flocculent type of settling contributes to floc size distributions. Large floc particles deposit in the front zone of settling tank, but small and loose flocs mostly in the zone near its outlet. On the other hand, filament length contained in one gram of sludge blanket solid increases along the flow direction. Large flocs with less filaments settle faster, but small flocs having more filaments result in poor settling. These results support function of microorganism selection occurring in secondary settling tank. In addition, designing a long rectangluar settling tank with double hoppers might be one of the ways of bulking control, but this idea has to be verified with a further study.

• Applied Microscopy
• /
• 제25권4호
• /
• pp.62-70
• /
• 1995

간소엽에 있는 동모양혈관내피창은 혈관과 간세포사이의 물질교환에 중요한 역할을 하는 부위로 알려져 있다. 그러나 이들 내피창에 관해서는 아직도 검토되어야 할 문제가 많이 남아 있다. 본 연구에서는 동모양혈관내피창 중 특히 큰창의 실재 여부와 창의 소엽내 분포상을 관찰하고 창의 크기와 분포상을 기초로 하여 내피창의 유형과 분포상을 재검토하고자 하였다. 실험동물은 식이조건을 일정하게 하기 위하여 최종 식이 투여 3시간 후에 관류고정하였으며 식에 따라 제작된 모든 조직표본은 주사전자현미경으로 관찰하였다. 그 결과 동모양혈관의 내면에서 여러가지 크기의 내피창이 관찰되었는데 이들은 작은창, 중간창 및 큰창의 3가지 유형으로 구분되었다. 작은 창은 낱개로 나타나거나 여러 개가 모여서 나타났으며 중간창은 낱개로 또는 작은창에 섞여서 나타났다. 큰 창도 낱개로 나타나거나 작은창과 중간창에 둘러싸여 나타났다. 특히 중간창은 소엽의 중심대에 많이 분포하는 경향이 있어 새로운 유형으로 분류하였다. 큰창은 다른 유형의 창과 마찬가지로 그 윤곽이 평탄하였으며 세포질에 의해 분할된 상도 관찰되었으나 파열된 상은 찾아 볼 수 없었기 때문에 인공산물이 아닐 것으로 추정하였다. 소엽은 창의 분포에 따라 주변대, 중간대 및 중심대로 구분되었다. 주변대에서는 작은창만이 보이는 동모양혈관이 많이 관찰되었다. 중심대에서는 중간창과 작은창이 보이는 동모양혈관이 많이 관찰되었다. 중간대에서는 큰창과 중간창 및 작은창이 다 같이 보이는 동모양혈관이 많이 관찰되었다. 이상의 소견으로 미루어 동모양혈관내피창은 소엽의 주변대에서 중간대로 가면서 점차적으로 커지다가 중간대에서 중심대로 가면서 작아지는 경향을 보이지만 중심대의 창은 주변대의 것에 비하면 큰 편이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.425-430
• /
• 2002

This thesis is a study on behavior for anchorage zone in prestressed double T beam using strut-tie model. Stress conditions of Anchorage zone in prestressed double T beam are very disturbed because large concentrated forces act on relatively small areas. Hence, anchorage zone must be considered in Design of prestressed double T beam. If irrational design or irrational construction be conducted, that may lose stability in capacity as structure. In current design practice, certain parts of structure are designed with extreme accuracy, while anchorage zone in prestressed double T beam is designed using common sense, and experience. Therefore, it is generally very conservative. For that reason, logical, reasonable concept and accuracies are desired at design of anchorage zone in prestressed double T beam. Strut-tie method satisfies those desires. In this thesis, anchorage zone in prestressed double T beam is analyzed by considering prestressing forces. Strut-tie model is constructed based on principle stress trajectory obtained from 3D-finite element analysis in anchorage zone, and amounts of reinforcement be obtained. Results of analysis are compared with the way used in current design practice, and this thesis presents that strut-tie model can be an economical design than current design methods without losing the degree of safety.

• Geomechanics and Engineering
• /
• 제7권1호
• /
• pp.105-131
• /
• 2014

In this paper, the effects of variability of smear zone characteristics induced by installation of prefabricated vertical drains on the preloading design are investigated employing analytical and numerical approaches. Conventional radial consolidation theory has been adopted to conduct analytical parametric studies considering variations of smear zone permeability and extent. FLAC 2D finite difference software has been employed to conduct the numerical simulations. The finite difference analyses have been verified using three case studies including two embankments and a large-scale laboratory consolidometer with a central geosynthetic vertical drain. A comprehensive numerical parametric study is conducted to investigate the influence of smear zone permeability and extent on the model predictions. Furthermore, the construction of the trial embankment is recommended as a reliable solution to estimate accurate smear zone properties and minimise the post construction settlement. A back-calculation procedure is employed to determine the minimum required waiting time after construction of the trial embankment to predict the smear zone characteristics precisely. Results of this study indicate that the accurate smear zone permeability and extent can be back-calculated when 30% degree of consolidation is obtained after construction of the trial embankment.

• 지질공학
• /
• 제25권4호
• /
• pp.485-498
• /
• 2015

울산광역시 매곡동 일대에서 새롭게 발견된 단층대의 기하학적, 운동학적 특성 및 제4기 단층운동에 대해 알아보고자 야외조사를 통한 지질구조분석을 실시하였다. 그 결과, 퇴적암이 분포하는 첫 번째 조사지점에서는 100 m 내외의 절취사면을 따라 반복층서, 소규모 단층, 단열대, 변형띠대 등이 연속적으로 관찰되고 있어, 이 지점은 대규모 단층의 손상대에 속하는 것으로 해석된다. 한편 주로 화강암 암편으로 구성된 쇄설성 퇴적층이 분포하는 두 번째 조사지점에서는 저각의 경사를 보이는 여러 조의 단층이 서로 분지 또는 결합하는 형태로 발달하고 있어 대규모 역단층이 발달하는 것으로 판단된다. 이 단층의 단층비지 내에 포함된 유기물의 방사성탄소연대에 기초해 추론된 단층의 최후기 운동시기는 33,275 ± 355년 전 이후로 제한된다. 이번 조사에서 확인된 단층대의 손상대 규모, 운동감각, 운동시기 등은 이 단층대가 연구지역 인근의 대규모 신기단층으로 알려진 울산단층 또는 연일구조선과 밀접한 관련이 있음을 시사한다. 따라서 연구지역 일대에 조성 중인 산업단지와 아파트를 비롯한 여러 시설물에 대한 지진 및 지질학적 안정성을 확보하고 이 지역에서의 지질재해에 대비하기 위해서는 보다 정밀한 구조지질학 및 고지진학 관점에서 이 단층에 대한 연구가 필요할 것으로 판단된다.