• 분석과학
• /
• 제13권3호
• /
• pp.399-402
• /
• 2000

To determine the concentrations of microcystins present in lake water or in tap water using high performance liquid chromatography, it is necessary to concentrate a large volume of water samples (about 20 L) into very small volume (0.1-0.3 mL). Concentration can be conveniently done when disc type solid phase extraction (SPE) apparatus is used. Using this apparatus we have investigated the recovery rates of three kinds of microcystins, RR, YR, LR. The recovery rates were relatively low and the reproducibilities were not good either. It is expected, however, that the appropriate selection of the disc conditioning and eluting solvents and reproducible reconcentration process after SPE will improve both the recovery rates and the reproducibilities.

• 한국광물학회지
• /
• 제20권4호
• /
• pp.261-266
• /
• 2007

천연시료 FeOOH-괴타이트에 대한 압축성을 측정하기 위하여 방사광과 라지 발륨 기기를 이용하여 상온에서 압축실험을 시행하였다. 에너지분산 x-선 회절법을 적용하였고 압력은 NaCl을 이용하여 측정하였다. 버치-머내한 상태방정식을 이용하여 계산된 체적탄성률은 131.1(5.8) GPa이었고 이때 $K_0'$은 고정된 값 4를 이용하였다. 현재 측정된 간은 이전에 발표된 값($111{\sim}147.9GPa$)과 일치하지 않고 차이를 보이고 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.29-39
• /
• 1999

Both conventional and PI3 implanters require dense sources for high productivity rate, and small sheath expansion in PI3 besides. The problem of the creation of large volume uniform plasma in PI3 facilities replaces that of beam forming in accelerators. Some aspects of ion extraction in both cases and Langmuir probe plasma diagnostics with be discussed. Plasma parameters of large volume multicusp dc hot cathode and inductively coupled RF plasma sources obtained with Langmuir probe and ion mass analyzer with be presented. Design features and performances of high current Freeman and ECR ion sources will be described.

• 한국연소학회지
• /
• 제17권2호
• /
• pp.1-8
• /
• 2012

Laminar flame speeds of Methane at elevated temperatures and pressures were investigated using constant volume spherical chamber. Pressure trace during combustion was measured in each test and this was used in calculating laminar flame speed of Methane. To have large amount of data, experimental apparatus was fabricated with fully automatically controlled feature. A calculating code which calculates laminar flame speeds at various temperatures and pressures with one experimental result was used to calculate laminar flame speeds. The experimental and calculating methods were verified using the calculated laminar flame speed result with PREMIX code.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.287-290
• /
• 2002

'Backhole' is an extra empty volume where is located behind the tangential entries at the rear par of the vortex chamber in the swirl coaxial injector. With the backhole, there are three major hydraulic characteristics. First, mass flow rate is increased about $15{\%}$ compared with the case without the backhole. Second, with the backhole, the center region of the injected flow has more large volume than that of without the backhole. The last, some range of the cone angle can be controlled by the backhole Experiments are conducted by using a PDPA apparatus, a mechanical patternator, stroboscopic photography and etc. With the backhole, based on cold-flow tests, the model swirl injector has some Improvement in its performance.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.68-72
• /
• 2004

The performance of copper-tungsten for electrodes used in an ultra high voltage interruption system was evaluated by means of an interruption test, which requires a large-scale apparatus and high cost. In this study, prior to the interruption test, the characteristics of a Cu-W electrode were estimated through the DC arc test, which is a simple, low cost procedure. The DC arc characteristics of a 20wt%Cu-80wt%W electrode were investigated with the change of tungsten powder size distribution and the addition of nickel. In specimens containing a high volume fraction of large sized tungsten particles, the relative density and hardness of sintered Cu-W electrodes increased while the electrical conductivity and the DC arc resistance decreased. Furthermore, the relative density became enhanced with the increase of the amount of nickel while the hardness and electrical conductivity diminished and the DC arc resistance worsened.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.25-37
• /
• 1999

positron annihilation Lifetime Spectroscopy has been extensively applied in recent years to investigate the free volume in polymers owing to the capability of the electron-positron bound system (positronium) to probe the typical size of sub-nanometric cavities among the macromolecular chains. In this paper we show recent results obtained through this technique in some amorphous polymeric mem-branes(olyurethanes. PUs and polytrimethilsylilpropine PTMSP) after a brief survey of the general features of the annihilation process as well as of the experimental apparatus. Lifetime of o-ps decay({{{{ tau _3}}}}) in PUs increases going from sub {{{{ TAU _g}}}} to over {{{{ TAU _g}}}} temperatures following a sigmoid curve. The coefficient of dilatation of the free volume fraction is shown to be the sum of two contributes due to the variation with T of the number of holes and of their mean volume. PAL spectrum of PTMSP freshly prepared shows four lifetime components: {{{{ tau _3}}}} and {{{{ tau _4}}}}: only are useful for free volume study. Two kinds of holes of different equivalent radius are reported ({{{{ gamma _s}}}} 4.60 nm and {{{{ gamma _1}}}} 0.754) The equivalent volume does not change in a range of 100 K. however the physical aging increases density and decreases oxygen permeability while {{{{ gamma _s}}}} goes down to 0.374 and r1 to 0.735 The number of holes obtained from the intensities{{{{ IOTA _3}}}} and {{{{ IOTA _4}}}} of PAL spectra decreases with aging 21.7% and 3.5% for large and small holes respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1668-1670
• /
• 2002

Since more than two decades, the conventional PD detecting systems have been employed in order to detect the partial discharges occurring inside the HV power apparatus for their diagnosis by use of different type of detection such as acoustic and UHF detection method. Regardless of their wide on-site application, a certain number of technical inconveniences have been disclosed as follows : multistage amplification. large volume, susceptible to external noise and high price. In this respect, the optical measurement techniques are widely proposed in these days in this concerned field ascribed to the following advantages : immune to external EMI noise and broad band response of the Pockels cell covering from DC to GHz. However, the reliability of several proposed techniques enabling to measure the electric field inside the large high power apparatus has not yet been well approved In this work, an optical measuring system, based on the Pockels effect, has been developed for measuring the field variation due to the corona discharges occurring in air and in oil. This system consists of He-Ne laser, single mode optical fiber, multi mode optical fiber, polarizing film, Y-cut LiNbO3 cell, photo detector, digital oscilloscope and personal computer with GPIB. For this purpose, optical probe has been specially designed and realized and put into the needle-plane electrode. Afterward, same measurement is carried out in oil. We demonstrate the characteristic of the optical measuring system and the measurement results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.95-95
• /
• 2010

An apparatus for generating flames and more particularly the microwave plasma burner for generating high-temperature large-volume plasma flame was presented. The plasma burner was composed of micvrowave transmission lines, a field applicator, discharge tube, coal and gas supply systems, and a reactor. The plasma burner is operated by injecting coal powders into a 2.45 GHz microwave plasma torch and by mixing the resultant gaseous hydrogen and carbon compounds with plasma-forming gas. We in this work used air, oxygen, steam, and their mixtures as a discharge gas or oxidant gas. The microwave plasma torch can instantaneously vaporize and decompose the hydrogen and carbon containing fuels. It was observed that the flame volume of the burner was more than 50 times that of the torch plasma. The preliminary experiments were carried out by measuring the temperature profiles of flames along the radial and axial directions. We also investigated the characteristics for coal combustion and gasification by analyzing the byproducts from the exit of reactor. As expected, various byproducts such as hydrogen, carbon monoxide, carbon dioxide, hydrogen sulfide, etc. were detected. It is expected that such burner cab be applied to coal gasification, hydrocarbon reforming, industrial boiler of power plants, etc.

• 한국추진공학회지
• /
• 제7권2호
• /
• pp.23-35
• /
• 2003

백홀은 스월 인젝터의 새로운 기하학적인 설계요소로서 스월 인젝터 내부에 있는 와류실의 연직 주입구후방에 위치하는 추가적인 빈 공간을 총칭한다. 이 백홀은 분무각이나 평균액적지름(SMD), 혼합 특성과 같은 스월 인젝터의 분무 특성을 변화시키게 된다. 이러한 백홀의 특성을 알아보기 위하여 직$.$간접 촬영 기법 및 PDPA와 기계적 유량 포집기 등을 사용하여 수류실험을 수행하였다. 백홀이 스월 인젝터 내에 존재하게 되면 단위시간당 유량이 증가하게 되어 분무되는 유동의 중심부가 강화된다. 또한 백홀은 스월 인젝터의 유동 분무각을 조절할 수 있게 하고 그로 인하여 혼합 효율을 변화시킨다.