• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.108.2-108
• /
• 2001

This paper presents the application of adaptive phase-locked loop (adaptive PLL) technique to control the process variable of the process control system. The adaptive algorithm is related to the error. When the error of the system is changed, the adaptive gain will be directly changed according to the error. If the value of the adaptive gain is large, the value of the error will be large. In this experiment, the reference input is 50% step input. The experimental result in controlling the first order lag process by the adaptive PLL shows that the response of the controlled system has no overshoot, short rise time, and zero steady-state error. The experimental result also shows that when the output disturbance enters to the process control system, the adaptive PLL can maintain the stability of the system and the effect of the output disturbance can also be fast rejected. The adaptive PLL has better performance ...

• 대한기계학회논문집B
• /
• 제32권3호
• /
• pp.235-240
• /
• 2008

The large size electromagnetic flowmeter was tested to investigate the variation of its error characteristics in the range of low velocity under 0.6 m/s using flowmeter calibration system. For the two case of valve opening rate 100 % and 50 %, these tests were undertaken three times each for twelve velocity condition from $0.05\;^m/s\;to\;0.6\;^m/s$ with increment of $0.05\;^m/s$. It is shown that error characteristic of electromagnetic flowmeter was stabilized within ${\pm}0.4%$ of rate both higher than $0.25^m/s$ of velocity condition and 50 % of valve opening position. But, measurement deviation of flowmeter for ${\Phi}400mm\;and\;{\Phi}600mm$ was out of expected deviation range. It is necessary to correction with calibration. In conclusion, error characteristic of electromagnetic flowmeter wasn't changed proportion to its size.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.852-860
• /
• 2003

We introduce the error models for an attitude determination system(ADS) with gyroscopes and stellar sensor. The ADS error models are derived according to the definition of the reference frame and of the attitude error. The equivalent error models applicable to the attitude determination system with large attitude errors are presented. The simulation results show that the proposed error models improve performance of the attitude determination system.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.74-82
• /
• 2002

In Intensity Modulated Radiotherapy (IMRT), radiation is delivered in a multiple of Multileaf Collimator (MLC) subfields. A subfield with a small leaf-to-leaf opening is highly sensitive to a leaf-positional error. We introduce a method of identifying and rejecting IMRT plans that are highly sensitive to a systematic MLC gap error (sensitivity to possible random leaf-positional errors is not addressed here). There are two sources of a systematic MLC gap error: Centerline Mechanical Offset (CMO) and, in the case of a rounded end MLC, Radiation Field Offset (RFO). In IMRT planning system, using an incorrect value of RFO introduces a systematic error ΔRFO that results in all leaf-to-leaf gaps that are either too large or too small by (2ㆍΔRFO), whereas assuming that CMO is zero introduces systematic error ΔCMO that results in all gaps that are too large by ΔCMO = CMO. We introduce a concept of the Average Leaf Pair Opening (ALPO) that can be calculated from a dynamic MLC delivery file. We derive an analytic formula for a fractional average fluence error resulting from a systematic gap error of Δ$\chi$ and show that it is inversely proportional to ALPO; explicitly it is equal to, (equation omitted) in which $\varepsilon$ is generally of the order of 1 mm and Δx=2ㆍΔRFO+CMO. This analytic relationship is verified with independent numerical calculations.

• 한국유체기계학회 논문집
• /
• 제3권1호
• /
• pp.5-9
• /
• 2000

A study to minimize the error in water-meter is considered in this work. It is presumed that the large amount of error at large flowrate is occurred due to the vibration of the impeller shalt. After a newly designed bushing applying hydrodynamic journal bearing theory is adopted, the error at large flow rate is decreased remarkably comparing with the classical water-meter. It is concluded that the effect of a bushing in water-meter stabilizes the rotator of the impeller shaft.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.807-810
• /
• 2002

The suitability of high-order accurate, central and upwind-biased compact difference schemes is evaluated for the large-eddy simulations of flows in complex geometry. Two flow geometries are considered: channel and circular cylinder. The effects of numerical dissipation and aliasing error on the evaluation of subgrid scale stress are investigated by extending the analysis by Ghosal (1) to centered and upwind compact schemes. It is shown that the failure of upwind schemes mainly comes from the aliasing error.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.973-983
• /
• 2003

The suitability of high-order accurate, centered and upwind-biased compact difference schemes is evaluated for large eddy simulation of turbulent flow. Two turbulent flows are considered: turbulent channel flow at Re = 23000 and flow over a circular cylinder at Re = 3900. The effects of numerical dissipation on the finite differencing and aliasing errors and the subgrid-scale stress are investigated. It is shown through the simulations that compact upwind schemes are not suitable for LES, whereas the fourth order-compact centered scheme is a good candidate for LES provided that proper dealiasing of nonlinear terms is performed. The classical issue on the aliasing error and the treatment of nonlinear terms is revisited with compact difference schemes.

• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1125-1132
• /
• 2005

초광대역 신호의 높은 시간해상도는 복잡한 다중경로 환경에서의 정밀한 거리추정 및 위치추적 을 가능하게 한다. 그러나 신호의 도착신호 추정시 발생하는 큰 추정오차의 발생은 거리추정의 정확도를 저하시키는 요인이 된다. 본 논문에서는 다중경로, 다중사용자 환경에서 초광대역 거리추정의 성능을 평가한다. 상호상관을 이용한 직렬검색 알고리듬을 적용할 때 발생하는 추정오차를 분석하고 모의실험 결과를 개시한다.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.5-15
• /
• 1995

IRR 적응 휠터의 공식오차 방식은 지역 최소값에 관계없이 전역 최소값에 수렴하며 안정성이 높다. 그러나 공식오차 방식은 입력 신호에 잡음이 섞여 경우 예측계수가 바이어스 되는 문제가 있다. 본 논문에서는 사전에 잡음에 대한 지식이 없이 바이어스가 없는 예측계수를 얻을 수 있는 새로운 공식 오차 방식을 위한 알고리즘을 제안한다. 이 알고리즘은 공식오차를 스므딩하는 방식을 이용하여 입력에 추가되는 잡음이 백색잡음인 경우 바이어스 없이 계수를 예측할 수 있다. 시뮬레이션을 통해 새로운 알고리즘이 공식오차의 중요한 장점인 빠른 수렴속도와 안정성을 유지하며 바이어스를 효율적으로 제거함을 볼 수 있다.

• 설비공학논문집
• /
• 제17권4호
• /
• pp.355-363
• /
• 2005

A novel method for simultaneously measuring the fluid velocity and the large particle velocity in a particle-containing fluid flow is developed in this study. In this method, the fluid velocity and the large particle velocity are measured by PIV and PTV, respectively. The PIV and PTV images are obtained from the same flow images. Since a PIV result represents the average displacement of all particles in an interrogation area, it will include an error caused by the relative displacement between the large particles and the fluid. In order to reduce the false influence of large particles on the PIV calculation, the mean brightness of small PIV particle images is substituted to the locations of large particles in the PIV images. The simulation results showed that the new method significantly reduces the PIV error caused by the large particles even at the case where the large particles occupy area fraction as large as $20\%$ of the full image.