• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.808-815
• /
• 2007

The optical performance of the mirror fur satellite camera is highly dependent on the adhesive properties between the mirror and its support. Therefore, in order to design a mirror with high optical performance, the mechanical properties of adhesives should be well defined. In this research, the mechanical properties of three kinds of space adhesives are studied. In case of the materials which show nearly incompressible behavior such as space adhesives, it is important to measure shear modulus which governs deviatoric stress components. Also the experiment should be performed in circumstances similar to real manufacturing process of mirror, because extra factors such as size effects, the adhesion effects of primer and reactions between adhesive and primer affect the properties of adhesive regions. In this research shear moduli of the adhesives are determined by using a single lap adhesively bonded joint. For the shear tests, several temperatures have been selected from $-20^{\circ}C$ to $55^{\circ}C$ which is operating temperature range of the adhesive. In the case of linear behavior materials, shear moduli are calculated through a linear curve fitting. Shear stress-strain relation is obtained by using an exponential curve fitting for material which shows non-linear behavior. The shear modulus of each adhesive is expressed as a function of temperature. Characteristics and adaptability of the adhesives are discussed regarding their temperature sensitivity.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.119-128
• /
• 2010

본 논문에서는 다양한 방법으로 제작된 복합재 접착 체결부의 강도에 대한 온도 및 습도 환경의 영향을 연구하였다. 시편은 두 가지 종류의 일체성형 방법 외에 동시접착 및 이차접착 등 총 네 가지 방법으로 제작하였고, 상온건조, 고온습도 및 저온건조 환경 등 세 가지 환경에서 강도시험을 수행하였다. 전체적으로 고온습도 환경에서의 파손강도가 상온 환경에 비해 11~23% 가량 높게 나타났고, 저온 환경에서의 파손강도는 동시접착 체결부를 제외하고는 8~21% 가량 상온 강도보다 낮게 나타났다. 시험 환경에 따른 체결부의 강도 차이는 환경에 따른 접착제의 물성 변화가 주 원인인 것으로 분석되었다.

• Composites Research
• /
• 제16권6호
• /
• pp.16-22
• /
• 2003

음향방출 신호를 측정하면 운용 중에 구조물 내부의 파손 발생이나 진전 시점을 측정할 수 있는 장점이 있다. 본 연구에서는 보강된 복합적층 패널의 압축 시험에서 발생하는 음향방출 신호를 측정하여 누적 신호 분포와 주파수 특성을 분석하였다. 보강 패널의 좌굴 발생과 좌굴 모드의 변환시 음향방출 신호가 발생하였으며, 파손 발생 후 진전시 연속적인 신호가 나타났다. 복합재료 본딩 체결부의 강도 시험에서는 발생하는 음향방출 신호와 파손 형태와의 관계를 분석하였다. 본 연구의 음향방출 신호 분석에 사용된 특성은 시간에 따른 누적 히트(hit) 분포, 주파수 특성과 신호의 크기이다. 본 연구를 통하여 음향방출 신호의 연속적인 발생은 파손의 진전에 따라 나타나는 특성이며, 측정된 음향방출 신호의 주파수 특성을 분석함으로써 적층 복합재료에서 나타나는 파손 모드와의 관계를 유추할 수 있다. 내부 응력크기에 따라 모재균열, 층간분리 또는 디본딩, 섬유파손을 각각 100 근방, 220kHz 근방, 500kHz이상으로 분류할 수 있다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.459-467
• /
• 2016

최근, 도로를 따라 지하 5~7m의 저심도에 설치되는 저심도 도시철도시스템의 경제성을 확보하기 위해, 신개념의 모듈식 개착 시공법을 개발 중에 있다. 본 연구에서는 상부 슬래브간의 연결부에 대한 구조성능 검증을 위해 루프이음을 가진 프리캐스트 철근콘크리트 부재들의 4점 재하 실험을 수행하였다. 전체 11개의 실험체가 제작되었으며 단면형상, 이음부 형상, 이음길이, 횡방향 보강철근을 변수로 이음이 없는 전단면 및 반단면 실험체와 비교하였다. 실험결과, 루프이음 실험체는 항복하중과 최대하중시 변위량 차이가 컸으며 이는 항복이후 접합부에서 발생한 균열이 확장됨에 따라 강성저하로 변위량이 급격히 증가한 것으로 판단된다. 또한 200mm의 루프이음을 가진 반단면 실험체의 경우, 이음이 없는 기준 실험체에 상당하는 휨성능을 확보하며 200mm 초과시 휨성능 향상의 정체기를 보였다.

• 대한금속재료학회지
• /
• 제48권6호
• /
• pp.533-542
• /
• 2010

The specific motivation for joining an Al alloy and Zn-coated steel arises from the need to save fuel consumption by weight reduction and to enhance the durability of vehicle structures in the automobile industry. In this study, the lap joining A6K31 Al alloy (top) and SGARC340 Zn-coated steel (bottom) sheets with a thickness of 1.0 mm and 0.8 mm, respectively, was carried out using the friction stir weld (FSW) technique. The probe of a tool did not contact the surface of the lower Zn-coated steel sheet. The friction stir welding was carried out at rotation speeds of 1500 rpm and travel speeds of 80~200 mm/min. The effects of tool geometry and welding speed on the mechanical properties and the structure of a joint were investigated. The tensile properties for the joints welded with a larger tool were better than those for the joints done with a smaller tool. A good correlation between the tensile load and area of the welded region were observed. The bond strength using a larger tool (M4 and M3) decreased with an increase in welding speed. Most fractures occurred along the interface between the Zn-coated steel and the Al alloy. However, in certain conditions with a lower welding speed, fractures occurred at the A6K31 Al alloy.

• 소성∙가공
• /
• 제28권3호
• /
• pp.135-144
• /
• 2019

Electromagnetic impulse welding (EMIW) is a type of solid state welding using the Lorentz force generated by interaction between the magnetic field of the coil and the current induced in the workpiece. Although many experimental studies have been investigated on the expansion and compression welding of tube using the EMIW process, studies on the EMIW process of lap joint between flat sheets are uncommon. Since the magnetic field enveloped inside the tube can be controlled with ease, the electromagnetic technique has been widely used for tube welding. Conversely, it is difficult to control the magnetic field in the flat sheet welding so as to obtain the required welding velocity. The current study analyzed the effects of coil shape on the impulse velocity for suitable flat one-turn coil for the EMIW of the flat sheets. The finite element (FE) multi-physics simulation involving magnetic and structural field of EMIW were conducted with the commercial software LS-DYNA to evaluate the several shape variables, viz., influence of various widths, thicknesses, gaps and standoff distances of the flat one-turn coil on the impulse velocity. To obtain maximum impulse velocity, the flat one-turn coil was designed based on the FE simulation results. The experiments were performed using an aluminum alloy 1050 sheets of 1.0mm thickness using the designed flat one-turn coil. Through the microscopic interfacial analysis of the welded specimens, the interfacial connectivity was observed to have no defects. In addition, the single lap joint tests were performed to evaluate the welding strength, and a fracture occurred in the base material. As a result, a flat one-turn coil was successfully designed to guarantee welding with bond strength equal to or greater than the base material strength.

• 한국언론정보학보
• /
• 제16권
• /
• pp.168-206
• /
• 2001

This study attempts to examine the relationships between the major market-based media and the government after closing military regime era, 1961-1987. After the military regime was collapsed, while the mass media in Korea obtained independence and autonomy from government, they have been confronted with the terrible competition not so much comparatively as before. The watchdog role in the traditional liberalism, which is regarded as normative relationship between the media and the government would be transformed in accordance with the market condition and the maturity of democracy. Thus, the watchdog metaphor has been variously deviated in rower-centered society; lap dog, guard dog, attack dog. liberalists argue that the primary democratic role of the media is to art as a public watchdog overseeing the state. Social democrats, however, criticize them as simplistic conception which could be only applied to the government. They argue that the media should be seen as a source of redress against the abuse of all forms of power over others; the home, the economy, and the civil society. The lap dog view is that the media is overwhelmingly dependent on the established power structure contrary to the watchdog. While the guard dog perspective is a means to preserve the power structure alarming with playing 'conflict role', the attack do8 aims to the private interest of the media in intruding into the politics. The attack dog perspective by T. Patterson could be composed of the interpretive style of report, the game schema report over the policy schema in the election, and the negativism against politics and government. The market-dominant press has been likely to transform from lap-guard dog into attack-guard dog. In Roh Tae Woo government(1988-1992), while the press was a lessened lap-guard dog before three parties merger in 1990, after merger the press had been transformed as the reinforced lap-guard dog because this merger entailed joint, party-to-party negotiations, and the formation of the new party preceded by dissolution of the ruling blot. In the early stage of Kim Young Sam government(1993-1997), the press has kept in pace with the reform movement drive-forced by the government. However, the press withdrew the support of Kim's reform in reaching the level of threat to ruling bloc. The press coalesced only circumstantially with government and was interested in preserving some margin of independence. The failure of Kim's reform proved the political muscle of the press in post-autho-ritarianism. In the middle stage of Kim Dae Jung government (1998-) that resulted in the shift of power structure as once-opposition party leader, the stress has been a manifested attack-guard dog owing to the anti-cold war policy, the realignment policy of power, and the minority-base of Kim's government. The press has endeavored to hold political communication within limits relatively less threatening to the established order.

• Composites Research
• /
• 제20권5호
• /
• pp.34-42
• /
• 2007

본 논문에서는 탄소 복합재와 알루미늄으로 구성된 이종재료 단일겹침 접착 체결부에서, 파손하중에 영향을 미치는 주요인자들의 효과를 실험적으로 연구하였다. 실험을 위해 접착압력 4가지(2, 3, 4, 6기압), 겹침길이 6가지(15, 20, 25, 30, 35, 40 mm), 모재 두께 2가지(1.58, 3.01 mm)에 대한 시편 총 66개를 제작하였다. 실험 결과 접착제 FM73에 대해 제작사에서 제시한 접착압력은 약 3기압이었지만 본 연구에서 사용한 이종재료 접착의 경우, 최소 4기압 이상의 접착압력이 필요함을 확인하였다. 겹침길이를 증가시킬 경우 파손하중이 증가하지만 접착부의 폭과 길이의 비가 1을 넘어갈 경우 접착강도 즉 단위 접착면적당의 파손하중의 증가는 크지 않았다. 모재의 두께도 접착부 파손하중 및 강도에 큰 영향을 미쳤으며 모재의 두께가 약 2배로 증가할 때 접착강도는 $12{\sim}32%$까지 증가하였다. 접착부의 파손은 대부분 복합재 모재의 층간분리 형태로 발생하였으며, 접착압력이 높아질수록, 접착길이가 길어질수록 층간분리가 발생하는 위치가 적층판 내부로 깊게 확대되는 경향이 있다.

• 항공우주시스템공학회지
• /
• 제16권1호
• /
• pp.12-16
• /
• 2022

유도 용접은 비접촉식으로 깨끗하고 빠른 공정으로 현재 주목받고 있다. 하지만 열가소성 수지는 전자기장에 영향을 받지 않기 때문에 유도 용접은 서셉터(Susceptor)라는 발열체가 필요하다. 고품질 접합을 목표로 연구가 진행되고 있지만, 결국 발열체라는 이물질이 들어가기 때문에 기준이 필요하다. 시편의 제작과 시험은 ASTM D5868에 근거하여 진행된다. 본 논문에서 평가 기준은 용접된 접합면의 상태와 기공률, 전단강도로 총 3가지를 근거로 판단할 것을 제안한다. 용접되는 접착면은 용융되고 냉각되면서 고형화가 되기 때문에 급격한 온도 변화는 기공을 발생시킬 수 있다. 또한 가열이 균일하지 않다면 원하는 성능을 기대하기 힘들다. PA6 (CF 30%) 엔지니어링 플라스틱을 이용하여 서셉터 제작과 유도 용접 그리고 성능 검증으로 진행하였다.