• Journal of Korean Society of Rural Planning
• /
• v.6 no.2 s.12
• /
• pp.43-49
• /
• 2000

Buffer zone selection technique for natural purification of livestock wastewater within a small agricultural watershed was developed using Geographic Information Systems. The technique was applied to $4.12\;km^2$ watershed located in Gosan-myun, Ansung-gun which have 20 livestock farmhouses. As a necessary data for selecting process, feedlot site map, digital Elevation Model (DEM), stream network, soil and land use map were prepared. By using these data, wastewater moving-path tracing program from each feedlot to the stream was developed to get the basic topographic factors; average slope through the paths, distance to the nearest stream and watershed outlet. To identify the vulnerable feedlots for storm event, the grid-based storm runoff model (Kim, 1998; Kim et al., 1998) was adopted. The result helps to narrow down the suitable area of buffer zone, and finally by using subjective but persuasive conditions related to elevation, slope and land use, the suitable buffer zones were selected.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.4
• /
• pp.271-281
• /
• 1979

The neccessity of hillside land reclamation for food production in Korea is no matter of question. Accordingly, the Government has launched some large scale hillside land reclamation projects. From the past experiences followings are pointed out as to the rational hillside land reclamation engineering methodologies. 1. It is observed that due to the shortages in labor and high wage, the machanization in hillside land reclamation will be an urgent subject. 2. There are several engineering methods for the reclamation of hillside lands; contour terracing, improved contour terracing, bench terracing and sloping bench terracing. 3. Selection of suitable methods will demand the considerations on the topography, particularly degree of slope, and the land use after reclamation. For ordinary crops cultivation, slope should be low and contour terracing is to be recommended, to enable the introduction of machines. In case of grass land development, after smoothing the land surface, improved contour terracing might be selected. And for the orchard development, sloping bench terracing with the construction of roads between the terrace will be suitable.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.999-1009
• /
• 2018

A Model Tree technique of data mining was applied to derive optimal equations for sediment discharge assessment based on the measured sediment data and then to evaluate stable channel design for Naesung Stream. The sediment discharge formula as a function of channel width, velocity, depth, slope and median grain diameter which was developed by a Model Tree technique with sediment discharge data measured in Korean River had a high goodness-of-fit between measured and calculated results. In case of the sediment discharge formula as a function of channel width, velocity, depth and median grain diameter which was developed by a Model Tree technique with sediment discharge data only measured in Naesung Stream represented the highest goodness-of-fit. Two types of sediment discharge formulas were applied to evaluate stable channel analysis for Yonghyeol Station of Naesung Stream. As a result, bed erosion was expected in the study section compared to the current section. It was also presented that the be slope might be changed to be a milder slope than the current slope to reach equilibrium condition in the long term.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.739-745
• /
• 2011

The MUSLE was utilized in this study to estimate soil erosion using daily precipitation which was main influential factor in soil loss estimation. Various scenarios were simulated to evaluate how transition of slope, agricultural products and precipitation could affect soil loss in the field. It was found that slope was the most affecting factor in soil loss estimation. Especially 1.8 times the soil loss was expected with potato at 45% slope compared with codonopsis at same slope with MUSLE model. Fortunately, farmers had planted codonopsis at this slope to reduce soil erosion from this steep slope. As shown in this study, the MUSLE method could be utilized to determine optimum crop type for each field with various slope conditions to minimize soil erosion. This approach utilized in this study could be applied to other agricultural watersheds to evaluate various soil erosion conditions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.94-102
• /
• 1999

The retaining wall is a structure which was made for changing land form in many construction. The first role of the retaining wall is to maintain the slope stability. But recently, the amount of retaining wall have been increasing because of the expansion of construction works and the amenity of urban environment have been decreasing because of environmental destruction and the scenic heterogeneity. So we should consider the slope stability and ecological stability at the same time. The purpose of this study is to develop the retaining wall revegetation technology using the Eco-Stone, the structure of co-satisfying which included the slope stability and the revegetation effect. Eco-Stone is a structure which has high stability for earth pressure, settlement and drainage. And cost and term of construction works also have been decreased. Eco-Stone structure is one of factors composing the ecological network which is harmonize with surrounding environment. In this way, it is expected that the ecological habitats of various species would be restored.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.250-257
• /
• 2012

Currently, large vessels and structures are manufactured into set of blocks, then assembled on-site. Large scale ships that weigh thousands of tons are built in a short period by making set of large blocks and assembled on a dock or a land. When a transporter encounters a slope during the process of transporting blocks, the heavy goods loaded on the transporter can be tilted. Further, if the vehicle moves down the slope in this state then it can cause an accident of overturn of loaded goods. The research has been taken into account to calculate the center of gravity of the transporter carrying heavy objects on a leveled surface or the three dimensions. In addition, ZMP (Zero Moment Point) is used to calculate the allowable slope degree that objects are predicted to overturn. Through the simulation, the objects' stability is tested when it is climbing the slope.

• Spatial Information Research
• /
• v.6 no.1
• /
• pp.25-33
• /
• 1998

The study region encompasses about 5,900$km^2$ including the topographic maps of Kimhae, Pusan, Miryang, Yangsan, Panguhjin, Tonggok, Uhnyang, Ulsan, Youngchon, Kyongju, Pulguksa, and Kampo, all at a scale of 1:50,000. The paper discusses how to have prepared the four thematic maps, landslide and unstable slope distribution map, slope classification amp, soil classification map, and lineament density map. Using all the above maps and GIS, the relative slope-stability map for the study regiun was produced at a scale of 1:100,000 ; the map can be utilized for the regional land-use planning in the study region.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1260-1265
• /
• 2009

Topographical features in South Korea is characterized that 70% of territory is composed of the mountains that can experience intense rainfall during storms in the summer and autumn. Efficient planning and management of landscape becomes utmost important since the cutting slopes in the mountain areas have been increased due to the limited construction areas for the roadway and residential development. This paper proposed an efficient way of slope management for the landslide risk by developing Web-GIS landslide risk management system. By deploying the Logistic Regression Analysis, the system could increase the prediction accuracy that the landslide disaster might be occurred. High resolution survey technology using GPS and Total-Station could extract the exact position and visual shape of the slopes that accurately describe the slope information. Through the proposed system, the prediction of damage areas from the landslide could also make it easy to efficiently identify the level of landslide risks via web-based user interface. It is expected that the proposed landslide risk management system can support the decision making framework during the identification, prediction, and management of the landslide risks.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.20-30
• /
• 2003

This study is aimed at establishing the categories and items for ecological assessment and evaluation of the environmental friendliness of golf courses in the capital region of Korea. The categories and items for the assessment have been derived based on the existing literature and interviews with golf experts. This study covers 32 golf courses in the capital region of Korea that are available in terms of data and on-site surveys. In order to conduct a comprehensive assessment of the environmental friendliness of the golf courses, the assessment area was divided into 4 categories that include a total of 14 sub-categories. The 4 categories encompass 1) location, 2) topography, 3) vegetation, and 4) construction. As its sub-categories, the location category includes current land use and zoning in the National Land Use Management Law. Topography has 2 sub-categories in the damage ratio of existing topography, gradient, cut area, and slope height. The assessment of vegetation is largely based on site surveys in the categories of preservation of the existing vegetation, the use of natural resources and existing trees, the component ratio of native tree species, the multi-layered structure of vegetation, and the utilization of water purification plants. In the aspect of construction, afforestation on tile slopes and the utilization of existing surface soil were evaluated. The examination of comparative analysis among the 10 items as a ratio measure showed that the scores were low in the sub-categories of current land we, the use of existing trees, and the multi-layered structure of vegetation. However, the rating results were satisfactory in the 2 sub-categories including cut area, and the utilization of native tree species. Those proved to be contributing factors in the ecological health of the golf courses. According to correlation analysis of the 10 items to the overall ecological rating of each golf course, the sizes of the 32 golf courses were mainly affected by the damage ratio of existing topography, gradient, preservation of vegetation and slope height. This study has the initiative to conduct an ecological assessment of golf courses in the country based on site surveys. The study results revealed that location factors such as current land use, damage ratio of topography and gradient and topographical factors were the main factors affecting the environmental friendliness of golf courses. This indicates indicating the significance of these factors in the future construction practices of golf courses. Furthermore, this study raises the need for follow-up studies to establish more detailed assessment criteria and to develop assessment techniques for areas such as slope afforestation and water purification plants that need a qualitative approach.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.93-105
• /
• 2016

Among 28 land Categories, 'road' is that most frequently established or transformed. Like that of other 27 land categories, the boundary of road should be defined by boundary making principles and then fixed by cadastral laws. But, some criteria to determine the land boundary, especially in boundary making rule which can be used by geographical features, is confused partly in Land Use Planning stages. Because the purpose of making any rules in fixing road boundary may be misinterpreted, the gap between law and real land boundary can be occurred. Those related rules in determining the land boundary must be improved urgently. Cut surface' or 'slope' should be conformed as a legal term and I suggest that 'Structures' must be changed to 'geographical features'.