• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.9-18
• /
• 2005

In order to systematically and visually understand well-known but qualitative and rotatively complicated relationships between synoptic fields in the BAIU season and heavy rainfall events in Japan, these synoptic fields were classified using the Self-Organizing Map (SOM) algorithm. This algorithm can convert complex nonlinear features into simple two-dimensional relationships, and was followed by the application of the clustering techniques of the U-matrix and the K-means. It was assumed that the meteorological field patterns be simply expressed by the spatial distribution of wind components at the 850 hPa level and Precipitable Water (PW) in the southwestern area including Kyushu in Japan. Consequently, the synoptic fields could be divided into eight kinds of patterns (clusters). One of the clusters has the notable spatial feature represented by high PW accompanied by strong wind components known as Low-Level Jet (LLJ). The features of this cluster indicate a typical meteorological field pattern that frequently causes disastrous heavy rainfall in Kyushu in the rainy season. From these results, the SOM technique may be an effective tool for the classification of complicated non-linear synoptic fields.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.672-675
• /
• 2006

The geostrophic current component is estimated from the sea surface velocity observed by the long-range High-Frequency Ocean Radar (HF radar) system in the upstream of the Kuroshio, by comparing with geostrophic velocity determined from along-track T/P and Jason-1 altimetry data. However, the sea surface velocity of the HF radar (HF velocity) contains not only the geostrophic current but also the ageostrophic current such as tidal current and wind-driven Ekman current. Tidal current component is first extracted by the harmonic analysis of the time series of the HF velocity. Then, the Ekman current is further estimated from daily wind data of IFREMER by applying the least-square method to the residual difference between the HF velocity and the altimetry geostrophic velocity. As a result, the Ekman current in the HF velocity is estimated as 1.32 % of the wind speed and as rotated 45$^{\circ}$ clockwise to the wind direction. These parameters are found almost common in the Kuroshio area and in the Open Ocean. After these corrections, the geostrophic velocity component in the HF velocity agrees well with the altimetry geostrophic velocity.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.699-704
• /
• 2001

Until recently, disposal to landfill has been the most convenient way to deal with the increasing amount of residues the shredding industries produce. But the shortage of such disposal sites and the risk that liquid drained from these waste dusts may pollute ground water have increased the environmental pressures to find more effective solutions. The present study is an alternative approach that suggests identifying waste dusts characteristics and selecting an appropriate binder for hazardous materials to reduce the amount of contaminants (mainly lead) that were leaking into the soil. Investigations on the characteristics of automobiles waste dusts show that these materials are composed mainly of cottons and sponge like substances, plastics, rubber, glasses and gravel, metals, and electric wires. Besides, the percentage in weight of organic (inflammable) materials is about 70% and the lead contamination, which has not a ionic but a particulate nature, is particularly remarkable in cottons and sponge like materials. Binding additives such as K-20 and sodium carbonate were not effective but the addition of 5 % of cement (in weight of the investigated sample) followed by a 3-minute stirring and a 4-hour storage could drastically reduce the run off of lead below the maximum authorized level. No addition of water was necessary in this method.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.887-894
• /
• 1995

Toward the development of universal, sensitive, and convenient method of DNA (or RNA) detection, two kinds of electrochemically active DNA ligands. acridine - viologen and oligonucleotide - ferrocene conjugate, were prepared. Thermodynamic and electrochemical study revealed that these probes bound strongly to DNA, and showed a typical cyclic voltammograms, indicating a potential for use as a reversible electrochemical labelling agent for DNA. Especially, using the electrochemically active oligonucleotide, we have been able to demonstrate the detection of DNA at femtomole levels by HPLC equipped with ordinary electrochemical detector (ECD). These results lead to the conclusion that the redox-active probes are very useful for the microanalysis of nucleic acid due to the stabilily of the complexes, high detection sensitivity, and wide applicability to the target structures (single- and double strands) and sequences.

• Wind and Structures
• /
• v.7 no.1
• /
• pp.13-28
• /
• 2004

A method of numerical analysis without conducting 3D wind tunnel model tests was examined in our previous study for predicting vortex-induced oscillation of bridge girders with span-wise varying geometry. The aerodynamic damping forces measured for plural wind tunnel 2D models were used in the analysis. A further study was conducted to examine the precision of solution obtained by this method. First, the responses of vortex-induced oscillation of two rocking models and a taut-strip bridge girder model with span-wise varying geometry were measured. Next, the responses of these models were numerically analyzed by means of this method, and then a comparison was made between the obtained $Vr-A-{\delta}_a$ contour diagram of each 3D model in the wind tunnel test and the diagram in the numerical analysis. Since close correlations were observed between each two $Vr-A-{\delta}_a$diagrams obtained in the model test and in the analysis in cases where the 3D model did not have strong three-dimensionality, our findings revealed that the predicted solution proved to be reasonably accurate.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.81-85
• /
• 2010

The medicinal plant, Kanzo (Glycyrrhiza uralensis), mainly grows on arid lands. The root of Kanzo has been compounded about 70% of herbal medicines in Japan because it has an important medicinal element. In addition, in recent years, the expansion of desertification becomes a serious problem. The cause is chiefly man activity such as over gathering plants1). The aim of this study is to prevent desertification by cultivating Kanzo with high quality. The first step is to grow Kanzo for greening. The second step is to stably produce the root with high medicinal quality. This paper presents growth properties of cultivating Kanzo by bottom watering method, which is under constant groundwater level. The main results of this paper are as follows: (1) The lower water content of cultivating soil is, the longer the root length is, (2) Growth of Kanzo is influenced by soil types, (3) Thick primary roots grow directly and vertically in low water content. On the other hand, thin secondary roots grow curvedly and horizontally in high water content and (4) Measuring evapo-transpiration velocity is the effective method to evaluate roots' growth tendency in the field.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2428-2435
• /
• 2024

Training for radiation protection and control requires a visual understanding of radiation, which cannot be perceived by the human senses. Trainees must also master the effective use of measuring instruments. Traditionally, such training has exposed trainees to radiation sources. Here, we present a novel e-training strategy that enables safe, exposure-free handling of a radiation measuring tool called a survey meter. Our mixed reality radiation-training system merges the physical world with a digital one. Collaborating with a mixed reality headset (HoloLens 2), this system constructs a mock-up of a survey meter in real-world space. The HoloLens 2 employs a browser-based application to visualize radiation and to simulate/share the use of the survey meter, including its physical movements. To provide a dynamic learning experience, the system adjusts the survey-meter mock-up readings according to the operator's movements, distance from the radiation source, the response time of survey meter, and shielding levels. Through this approach, we expect that trainees will acquire practical skills in interpreting survey-meter readings and gain a visual understanding of radiation in real-world situations.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.55-55
• /
• 2003

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.442-445
• /
• 1996

This paper proposes a technique for analyzing mutual relation of an entangled cord by consistent labeling. Cords are often entangled unexpectedly and sometimes they even produce knots. The purpose of this study is to provide an algorithm to resolve such entangled cords automatically. It may as well have applications in future to recognizing the structure of tree branches, angiography, abdominal intestines, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1623-1626
• /
• 1991

The paper considers the algorithms of balanced realization from SISO transfer functions. Some methods which have been proposed to find a balanced realization from the companion form realization, are investigated. Then a new method is proposed which finds a balanced realization from the discrete Schwarz form realization. The process of computing the elements of Schwarz matrix from the transfer function is equivalent to the Schur-Cohn stability test procedure. Comparison of the proposed method with the previous works is also discussed.