• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.199-208
• /
• 2012

The world's first geostationary ocean color imager (GOCI) is a three-mirror anastigmat optical system 140 mm in diameter. Designed for 500 m ground sampling distance, this paper deals with on-orbit modulation transfer function (MTF)measurement and analysis for GOCI. First, the knife-edge and point source methods were applied to the 8th band (865 nm) image measured April 5th, 2011. The target details used are the coastlines of the Korean peninsula and of Japan, and an island 400 meters in diameter. The resulting MTFs are 0.35 and 0.34 for the Korean East Coastline and Japanese West Coastline edge targets, respectively, and 0.38 for the island target. The daily and seasonal MTF variations at the Nyquist frequency were also checked, and the result is $0.32{\pm}0.04$ on average. From these results, we confirm that the GOCI on-orbit MTF performance satisfies the design requirements of 0.32 for 865 nm wavelength.

• 한국전자파학회논문지
• /
• 제17권4호
• /
• pp.393-399
• /
• 2006

본 논문에서는 비교적 큰 규모의 불규칙 조면에 의한 산란 특성을 예측하기 위해 ray tracing 기법을 적용하였다. 전자계를 평가하기 위하여, 회절 레이(ray)에 대해서 knife edge 회절에 의한 회절 계수를 사용하였고, 반사 레이에 관해서는 Fresnel의 반사 계수를 사용하였다. 또한 레이 추적 방법에는 수신기에 도달하는 모든 레이의 경로를 정확히 찾아주는 image method를 채용하였으며, 불규칙 조면에 회절계를 고려하였다. 파도 모양의 조면에 의한 산란 특성과 빌딩 모양의 표면에 의한 지연 확산(delay spread) 특성에 대해 수치 계산하였다. 불규칙 조면에 의한 산란 특성을 수치적으로 해석하는데 ray tracing 기법을 적용하여 그 유효성을 입증하였다.

• 한국정밀공학회지
• /
• 제25권4호
• /
• pp.61-68
• /
• 2008

Of the seven base units of the international system of units, only the kilogram is still defined in terms of a material artifact. One of the experimental approaches opening the way to a new definition of the kilogram is the watt balance To improve the performance of the NPL watt balance, we need to quantify and reduce hysteresis effects in the balance knives. In this paper, we discuss the mechanical characteristics of the knife edges used in the NPL watt balance. The hysteresis mechanism is analyzed using the finite element method. It is found that the cause of hysteresis is not normal stress but shear, and the deformation of the flat, rather than the knife, is an important factor in the hysteresis mechanism. The study presented here, using finite element analysis, suggests that parameters such as material property, tip radius and knife straightness can be more important than others, such as friction coefficient, tip angle, etc.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.146-150
• /
• 2015

Steel is produced through the steel-making process with a desired shape by a rolling press. Scrap is removed according to the sheet edge to improve the quality of the product. This machine is called a side trimmer. This study aimed to develop a side trimmer for automatically changing the width of the trimming knife without line stopping. This machine consists of a housing opening device and a turning device. The measuring technologies of sheet width, trimming knife rotation angle, and knife gap for increasing the control accuracy. This experiment was conducted to evaluate the performance of the developed technologies. It was reduced by 10% compared with the operation time of the conventional method.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.191-192
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.169-171
• /
• 1993

In order to estimate space charging process in the corona charging apparatus which has been used to make polymer electret cell, the electrical properties of 30[${\mu}m$] thick polypropylene film were obtained from TSC measurement after corona charging between copper knife electrode and aluminum cylinder electrode with the voltage of -8, -7, -6, -5 (kV). And, the electrostatic contour and the electric field vector were calculated using Finite Element Method with the electrical properties obtained from TSC spectra analysis. The edge effect around the edge of knife electrode affects electrostatic contour on the surface of specimen and the electric field concentration inside the polymer. As a result the uneven charging state in the electret cell due to the mistake of design was calculated, and the optimal design of corona charging apparatus opprobriate to various specimen was come to be practicable.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1217-1224
• /
• 2009

고정익 항공기가 3차원의 복잡한 경로를 추종하기 위해 필요한 비교적 간단하며 효과적인 유도 제어 방법을 제시한다. 소개되는 방법은 비선형 경로 추종 유도 기법을 외부 루프로 사용한다. 외부 루프는 원하는 경로와 함께 항공기의 현재 위치와 속도를 바탕으로 비행 경로를 변화하기 위한 가속도 명령을 생성한다. 가속도 명령은 중력과 벡터적으로 결합되어 Specific Force Acceleration을 만든다. 이렇게 생성된 Specific Force Acceleration은 내부 루프를 위한 명령으로 쓰이는데, 이는 항공기가 가속도 자체보다는 Specific Force Acceleration을 더 직접적으로 제어할 수 있기 때문이다. 나아가 배면 비행이나 Slow Roll, Knife-Edge 등과 같은 옆미끄럼짐 기동을 하기 위해 필요한 롤 자세 제어 기법도 제시한다. 마지막으로 표준이 되는 여러 가지 곡예비행 경로들에 대한 시뮬레이션을 수행함으로써 제시된 기법의 성능을 검증한다.

• 제어로봇시스템학회논문지
• /
• 제22권4호
• /
• pp.247-252
• /
• 2016

In this paper, we propose a new defect detection technology for micro-defect on the surface of steel products. Due to depth and size of microscopic defect, slop of surface and vibration of strip, the conventional optical method cannot guarantee the detection performance. To solve the above-mentioned problems and increase signal to noise ratio, a novel retro-schlieren method that consists of retro reflector and knife edge is proposed. Moreover dual switching lighting method is also applied to distinguish uneven micro defects and surface noise. In proposed method, defective regions are represented by a black and white pattern. This pattern is detected by a defect detection algorithm with Gabor filter. Experimental results by simulator for sample defects of cold rolled steel show that the proposed method is effective.

• 한국광학회지
• /
• 제8권1호
• /
• pp.73-79
• /
• 1997

랜드/그루브 기록 광디스크에서 랜드와 그루브의 영향, 각종 수차 그리고 수광계의 변화가 포커스에러신호에 미치는 영향을 나이프엣지법과 비점수차법으로 구분하여 시뮬레이션을 통해 분석하였다. 그루브의 영향에 의해 포커스에러신호에서 Aero Cross 점이 Shift되는데, 이는 디스크 반사 회절빔의 파면이 Defocus 성분을 포함하고 있기 때문이라는 것을 밝혔다. 또한 회절빔의 각 차수별로 포커스에러신호를 분석함으로써 빔점수차 방식에서 랜드와 그루브의 영향으로 에러신호의 감도가 감소함을 보았다.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.353-360
• /
• 2020

Adopting an elaborately designed reflective objective consisting of four mirrors, we have developed a rotating-polarizer-type microspot spectroscopic ellipsometer (SE) with an ultra-small spot size. The diameter of the focused beam, whether evaluated using a direct-image method or a knife-edge method, is less than 8.4 ㎛. After proper correction for the polarizing effect of the mirrors in the reflective objective, we unambiguously determine the dispersion of the complex refractive index and the thickness of monolayer MoS₂ using the measured microspot-spectroellipsometric data. The measured ellipsometric spectra are sensitive enough to identify small variations in thickness of MoS₂ flakes, which ranged from 0.48 nm to 0.67 nm.