• 대한임상전기생리학회지
• /
• 제5권2호
• /
• pp.35-45
• /
• 2007

The purpose of this study was to examine spiral way movement of a trunk exerts on the movement ability. The details established to achieve for this article. This examination confirmed the weight, weight/height2 index, ratio of lumbar to pelvic, musculoskeletal quantity, push up for 2 minute, pitch a ball and voluntary isometric contraction with flexion and extension of knee joint of the subjects with spiral direct movement. Healthy eighteen subjects who understand fully the significance of procedure, consented to a plan, without neuromuscular disease were participated in two groups of experiment. The group were a spiral movement(9), rectilinear movement(9). Trunk movement tested 2 sessions of a spiral movement and rectilinear movement with a push up for 2 minute, 5days per a week, for the 4 weeks. This experiment tested 3 times with a sufficient rest for fatigue limitation. An analysis of the results used a paired samples t-test for difference from before and after experiment. The following results were obtained; At an internal change of the body, the musculoskeletal quantity was increased significantly to spiral movement group, but the weight was increased significantly, the musculoskeletal quantity was not significant to rectilinear movement. The movement ability evaluation for a external change was increased significantly in a push up for 2 minute, pitch a ball, isometric contraction with extension of knee joint of a spiral movement group, but a push up for 2 minute was increased significantly in a push up for 2 minute on the abdominal muscle training of a rectilinear movement group. As compared with a rectilinear movement, a spiral movement was more effect by cooperation with nerve and musculoskeletal system and an increase in movement ability was caused by learning acknowledgment, muscular reeducation. These results lead us to the conclusion that a spiral movement of trunk was more effect than a rectilinear movement, the coordination of nerve and musculoskeletal system was of importance of Multi-direction movement. Therefore, A further studies concerning the therapeutic exercise intervention and active-dynamic analysis could enhance the development of the most effect on the trunk.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.183-188
• /
• 2021

Objective: The purpose of this study was to develop a stretchable joint motion sensor that is based on silver nano-particle. Through this sensor, it can be utilized as an equipment for rehabilitation and analyze joint movement. Method: In this study, precursor solution was created, after that, nozel printer (Musashi, Image master 350PC) was used to print on a circuit board. Sourcemeter (Keithley, Keithley-2450) was used in order to evaluate changes of electric resistance as the sensor stretches. In addition, the sensor was attached on center of a knee joint to 2 male adults, and performed knee flexion-extension in order to evaluate accurate analysis; 3 infrared cameras (100 Hz, Motion Master 100, Visol Inc., Korea) were also used to analyze three dimensional movement. Descriptive statistics were suggested for comparing each accuracy of measurement variables of joint motions with the sensor and 3D motions. Results: The change of electric resistance of the sensor indicated multiple of 30 times from initial value in 50% of elongation and the value of electric resistance were distinctively classified by following 10%, 20%, 30%, 40% of elongation respectively. Through using the sensor and 3D camera to analyze movement variable, it showed a resistance of 99% in a knee joint extension, whereas, it indicated about 80% in flexion phase. Conclusion: In this research, the stretchable joint motion sensor was created based on silver nanoparticle that has high conductivity. If the sensor stretches, the distance between nanoparticles recede which lead gradual disconnection of an electric circuit and to have increment of electric resistance. Through evaluating angle of knee joints with observation of sensor's electric resistance, it showed similar a result and propensity from 3D motion analysis. However, unstable electric resistance of the stretchable sensor was observed when it stretches to maximum length, or went through numerous joint movements. Therefore, the sensor need complement that requires stability when it comes to measuring motions in any condition.

• 한국의류학회지
• /
• 제39권1호
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• The Journal of Korean Physical Therapy
• /
• 제33권3호
• /
• pp.162-167
• /
• 2021

Purpose: A hyperextended knee is described as knee pain associated with an impaired knee extensor mechanism. Additionally, a hyperextended knee may involve reduced position sense of the knee joint that decreases the individual's ability to control end-range knee extension movement. The purpose of this study was to investigate the effects of visual biofeedback information for plantar pressure distribution on knee joint angle and lower extremity muscle activities in participants with hyperextended knees. Methods: Twenty-three participants with hyperextended knees were recruited for the study. Surface electromyography signals were recorded for the biceps femoris, rectus femoris, gastrocnemius, and tibialis anterior muscle activities. The plantar pressure distribution was displayed and measured using a pressure distribution measuring plate. Knee joint angle kinematic parameters were recorded using a motion analysis system. The visual biofeedback condition was the point at which the difference between the forefoot and backfoot plantar foot pressure on the monitor was minimized. The Wilcoxon signed-rank test was used to determine the significance between the visual biofeedback condition and the preferred condition. Results: The knee joint angle was significantly decreased in the visual biofeedback condition compared to that in the preferred condition (p<0.05). The rectus femoris and gastrocnemius muscle activities were significantly different between the visual biofeedback and preferred conditions (p<0.05). Conclusion: The results of this study showed that visual biofeedback of information about plantar pressure distribution is effective for correcting hyperextended knees.

• PNF and Movement
• /
• 제19권1호
• /
• pp.9-17
• /
• 2021

Purpose: This study aims to verify the effectiveness of sit-to-stand training with visual feedback to improve balance ability and knee extensor strength of total knee replacement patients. Methods: In this study, 15 patients with total knee replacement participated in this study. Subjects were assigned to two groups: a feedback group (experimental group)(n = 8) and a control group (n = 7). They all received 30 min of continuous passive motion (CPM) and sit-to-stand training for 15 min five times per week for two weeks. Knee extensor and balance ability were measured. Knee extensor was measured by Biodex system 3; balance ability was measured by Balancia software. Results: After the intervention, there was a significant difference in the strengthening of the knee extensor muscles in the feedback group, area 95%, weight distribution of the affected side, and the sit-to-stand test repeated five times (p < 0.05). Conclusion: The results of this study showed that sit-to-stand training with visual feedback was more effective in increasing knee extensor muscle strength and balance ability than the sit-to-stand training without visual feedback. Therefore, in order to improve the knee extensor muscle and the balance of total knee replacement patients, it is necessary to consider providing visual feedback during sit-to-stand training.

• 한국의류산업학회지
• /
• 제9권2호
• /
• pp.237-242
• /
• 2007

The purpose of this study is to examine the functionality with improved pattern-design working uniform(protocol, P) and current working uniform(control, C). Movement functionality evaluation of improved pattern-design working uniform was carried out through sensory evaluation of working uniform. Movements for the sensory evaluation consisted of four types of up and down and horizontal movements of the shoulders, four types of waist movements and five types of knee movements. The results have been shown as follows: The sensory value of back girth, wrist, side seam area of the "P" with the posture of raising an arm forward up to $90^{\circ}$ and the maximal arm's vertical movement significantly improved compared to the "C". Therefore, it can be concluded that movement functionality was increased with the improved pattern-design working uniform in the respect of arm's up and down movement. Furthermore, for P, Movement functionality improvements were shown in P with arm's horizontal movement, waist bending movement, and knee movement. Current working uniform(C) is jumper-type which wa designed without consideration for movement functionality of the arms and legs. But Pattern-design uniform(P) which was developed in this study. Therefore, the more patterns development, the better movement functionality in working uniform. The improved movement functionality improvements in working uniform will provide not only personal pleasantness but also efficiency of productivity at construction sites. In respect of human body's movement, further study for improved working uniform is required.

• 한국전문물리치료학회지
• /
• 제18권3호
• /
• pp.26-37
• /
• 2011

Although there have been various studies related to the body's movement from a sitting to a standing position (sit-to-stand task), there is limited information on the kinematic changes on the frontal and transverse planes. The purpose of this study was to ascertain how pelvic tilt affects kinematic changes in the frontal and transverse planes in the hip and knee joints during a sit-to-stand task. For this study, 33 healthy participants (13 female) were recruited. Each participant rose from a sitting to a standing posture at his or her preferred speed for each of three different pelvic tilt trials (anterior, posterior, and neutral), and the measured angles were analyzed using a 3-D motion analysis system. A one-way repeated measure analysis of variance was performed with Bonferroni's post hoc test. In addition, an independent t-test was carried out to determine the sex differences in hip and knee joint kinematic changes during the sit-to-stand tasks. The results were as follows: 1) The hip and knee joint angle in the frontal and transverse planes showed a significant difference between the different pelvic tilt postures during sitting in the pre-buttock lift-off phase (pre-LO) (p<.05). Compared to the posterior pelvic tilt posture, the anterior pelvic tilt posture involved significantly greater hip joint adduction and internal rotation, knee joint adduction, and reduced internal rotation of the knee joint. 2) Sex differences were found with significant differences for males in the initial and maximal angles in the frontal plane of the hip and knee joint (p<.05). Females had a significantly smaller initial abduction angle of the hip joint and a significantly greater maximal angle of the hip adduction joint. These results suggest that selecting a sit-to-stand exercise for pelvic tilt posture should be considered to control abnormal movement in the lower extremities.

• The Journal of Korean Physical Therapy
• /
• 제26권6호
• /
• pp.449-452
• /
• 2014

Purpose: The purpose of this study was to analyze the coordination between trunk flexion and lower limb extension contributing to vertical propulsion during sit-to-stand (STS) at different chair heights in the elderly. Methods: Ten elderly subjects were asked to stand up at their natural speed from different chair heights : (1) $90^{\circ}$ knee flexion; (2) $100^{\circ}$ knee flexion; (3) $110^{\circ}$ knee flexion; and (4) $120^{\circ}$ knee flexion. A standard chair without a backrest or armrests was used in this study. To remove inertial effects of upper limb movements, subjects were asked to stand up from a chair with their arms crossed at the chest. Mean of results of three trials were used in the analysis at different knee flexion angles. Distances moved by the shoulder for compensatory trunk movement was recorded by motion analysis and vertical force was recorded under foot using force plates. Distances moved by the shoulder and vertical ground reaction force measurements were analyzed using repeated ANOVA. Results: Distances moved by the shoulder significantly decreased with higher chair (p<0.05). Vertical forces were not significant difference on chair heights (p>0.05), but results of pairwise comparisons for vertical force revealed significant difference between $90^{\circ}$ knee flexion and $120^{\circ}$ knee flexion (p<0.05). Conclusion: Trunk movement is probably used as a compensatory mechanism at low chair heights to increase lift-off from sitting by the elderly.

• 대한통합의학회지
• /
• 제11권2호
• /
• pp.159-168
• /
• 2023

Purpose : This study aimed to investigate how neuromuscular electrical stimulation (NMES) affects the balance ability of patients who have undergone total knee arthroplasty owing to osteoarthritis. Methods : Thirty patients who had undergone total knee arthroplasty were randomized to an experimental group (n=15) and a control group (n=15). The experimental group received conventional physical therapy for 50 minutes and NMES treatment for 30 minutes, whereas the control group received conventional physical therapy for 50 minutes and active range of motion (AROM) exercises for 30 minutes. Within-group and between-group changes in static and dynamic balance ability before and after the 4-week intervention were analyzed. Results : In the within-group comparison, sway velocity in the center of gravity and total distance were significantly improved in both the experimental and control groups (p<.05), with no significant differences between the groups (p>.05). In the within-group comparison, both the experimental and control groups showed significant improvement in the functional reach test and movement velosity (p<.05). In the between-group comparison, the experimental group showed a significantly better improvement than the control group in the functional reach test (p<.05), but there was no significant difference in the movement velosity test (p>.05). Conclusion : In this study, NMES improved the static and dynamic balance in patients who had undergone total knee arthroplasty. Compared with AROM exercises, there was a greater effect on dynamic balance partially; however, the overall effect was similar. Therefore, NMES may be one option among various interventions to improve the balance ability in patients who have undergone total knee arthroplasty. In particular, this method may be effective when it is difficult to apply balance training for patients with total knee arthroplasty in a clinical setting.

• PNF and Movement
• /
• 제10권3호
• /
• pp.25-31
• /
• 2012

Purpose : This study was intended to compare muscle activity in relation to knee joint angles on closed kinetic chain. Methods : A total of 13 subjects consisting of 5 adult males and 8 adult females were made to make movements maintaining knee joint angles at $30^{\circ}$, $45^{\circ}$ and $90^{\circ}$ on closed kinetic chain and the muscle activity occurring in their vastus medialis, rectus femoris and vastus lateralis was measured. Statistical data were analyzed using oneway ANOVA. Results : On closed kinetic chain, the muscle activity of the vastus medialis, rectus femoris and vastus lateralis increased the most at $90^{\circ}$ among the knee joint angles with statistically significant differences(p<0.05). Conclusion : On closed kinetic chain, it could be seen that as the angle of the knee joint increased, the muscle activity increased.