• 제목/요약/키워드: kinds of aggregate

검색결과 107건 처리시간 0.022초

석탄회 조분을 유효이용한 보수 모르터의 개발 (Development of the Repair Mortar using Coarse Powder of Coal Ash)

  • 전진환;조정기;시기영장;립정호;화미광희
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.1017-1022
    • /
    • 2003
  • The hydraulic structures such as aqueduct tunnels and the drainage canal of the hydroelectric power plant in Japan are almost old. Therefore, the concrete surface of the aqueduct tunnel has received damage by wear-out and the crack, etc. This study was to develop repair mortar mixed a coal ash coarse powder by using two kinds of high early strength cements. As a result, the repair mortar was obtained by substituting the EF cement (maid in Japan) and the MT cement (maid in South Korea) at a rate of 60:40, and substituting the coal ash 30% and the mixing rate 35% of the artificial aggregate for natural fine aggregate.

  • PDF

Size Heterogeneity of Murine Tumor Necrosis Factors Induced from Mouse Peritoneal Macrophages

  • Baik, Na-Gyoung;Jeong, Jee-Yeong;Kim, Soung-Soo
    • BMB Reports
    • /
    • 제28권1호
    • /
    • pp.46-50
    • /
    • 1995
  • Three kinds of mouse tumor necrosis factor (TNF), which have molecular weights of 35 kDa, 45 kDa, and 18 kDa on SDS-PAGE, were partially purified from serum-free culture supernatants of mouse peritoneal macrophages induced with lipopolysaccharide. Analysis of the native molecular weights by gel filtration indicated that the 18 kDa and 45 kDa TNFs aggregate into 50 kDa and 100 kDa molecules, respectively, while the 35 kDa TNF is contained in high molecular weight aggregates of approximately 200 kDa. The three kinds of cytotoxic factors all elicited tumor reducing responses.

  • PDF

농업부산물을 활용한 사면보호용 식생 블럭 개발 (Development of Planting Block for Protection of Inclined Plane Using Agriculture By-products)

  • 백승출;김영익;성찬용
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2002년도 학술발표회 발표논문집
    • /
    • pp.201-204
    • /
    • 2002
  • This study is performed to develop of planting block using rice straw ash for Protection of Inclined plane. For the planting, porous concrete block is demanded ability to passing water and air through void of block. In this paper, material used for porous concrete block is cement, rice straw ash, and coarse aggregate(5-10, 10-20, 5-20mm). Planting block size is 23*23*4cm and kinds of planting are Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata. The results measured for three months show that possible planting of various kinds for porous concrete block.

  • PDF

혼화재의 종류에 따른 고강도 콘크리트의 폭렬특성에 관한 실험적 연구 (An experimental Study on explosion property of high-strength concrete according to the kinds of admixtures)

  • 민세홍;권기석;류동우
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2013년도 춘계 학술논문 발표대회
    • /
    • pp.105-106
    • /
    • 2013
  • The construction of modern society, the use of high-strength concrete structures is becoming frequent. Admixture has been reported as a factor causing the explosion occurred. This study was experimental research on high strength concrete according to the kinds of admixture. Admixture of four different mix. fire resistance test results are outstanding when using blast furnace slag aggregate. When using silica fume spalling phenomena were most violent.

  • PDF

굴패각을 사용한 콘크리트 강도발현에 관한 실험적 연구 (An Experimental Study on the Strength Development of ConcreteUsing of the Oyster Shells)

  • 구해식;전학수
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권5호
    • /
    • pp.137-147
    • /
    • 2006
  • 본 연구는 남해안 연안에 방치되고 있는 굴패각을 세골재 크기의 5.0mm이하로 분쇄하여 실제 현장에서 사용가능한 세골재 대체재로 활용하여 굴패각을 사용한 콘크리트의 성질 및 제반 강도들에 대해 연구한 것이다. 이를 위해 기본 실험과 주요 변화 요인들에 대해 1,028개의 공시체 및 시험체를 제작 실험한 결과 굴패각을 사용한 콘크리트 제반 강도는 일반콘크리트 강도와 최대 10%정도 차이를 보였으며 세골재 대체재로서 우수한 굴패각 입도크기는 5.0mm이하를 균등하게 취한 경우로 약 30%까지는 대체 가능한 것으로 나타났다. 그리고 본 논문에서는 굴패각을 사용한 제반 콘크리트 강도상호 관계식들을 제시하였고 이의 탄성계수는 굴패각 대체율이 증가할수록 감소하였는데 대체율 10%까지는 거의 유사한 값을 보였다.

콘크리트 초기강도에 영향을 미치는 수화물의 정량분석에 관한 연구 (A Quantitative Analysis on Feature of Hydrate Affecting Early-Age Strength)

  • 송태협;이문환;이세현;박동철
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
    • /
    • pp.583-586
    • /
    • 2005
  • Strength of concrete is very important factor in design and quality management and may represent overall quality of concrete. Such strength of concrete may differ depending on amount of cement mixed, water and fine aggregate ratio. Classic concrete products have been produced mainly with ordinary portland cement(hereinafter 'cement'), water and fine aggregate as shown above, but various additives and mixture materials have been used for concrete manufacturing, along with development of high functional concrete and diversification of structures. Various kinds of chemical mixtures agents and mixture materials have been used as it requires concretes with other features which cannot be solved with existing materials only, such as high strength, high flexibility and no-separation in the water. Such addition of various mixture agents may cause change in cement hydrate, affecting strength. Hydration of cement is the process of producing potassium hydroxide, C-S-H, C-A-H and Ettringite, while causing heat generation reaction after it is mixed with water, and generation amounts of such hydrates play lots of roles in condensation and hardening. This study aims to analyze its strength and features with hydrates by making specimen according to curing temperature, types of mixture agent, mixing ratio and ages and by analyzing such hydrates in order to analyze role of cement hydrate on early strength of concrete.

  • PDF

Analysis of quasi-brittle materials using two-dimensional polygon particle assemblies

  • Lee, Jong Seok;Rhie, Yoon Bock;Kim, Ick Hyun
    • Structural Engineering and Mechanics
    • /
    • 제16권6호
    • /
    • pp.713-730
    • /
    • 2003
  • This paper contains the results of the study on the development of fracture and crack propagation in quasi-brittle materials, such as concrete or rocks, using the Discrete Element Method (DEM). A new discrete element numerical model is proposed as the basis for analyzing the inelastic evolution and growth of cracks up to the point of gross material failure. The model is expected to predict the fracture behavior for the quasi-brittle material structure using the elementary aggregate level, the interaction between aggregate materials, and bond cementation. The algorithms generate normal and shear forces between two interfacing blocks and contains two kinds of contact logic, one for connected blocks and the other one for blocks that are not directly connected. The Mohr-Coulomb theory has been used for the fracture limit. In this algorithm the particles are moving based on the connected block logic until the forces increase up to the fracture limit. After passing the limit, the particles are governed by the discrete block logic. In setting up a discrete polygon element model, two dimensional polygons are used to investigate the response of an assembly of different shapes, sizes, and orientations with blocks subjected to simple applied loads. Several examples involving assemblies of particles are presented to show the behavior of the fracture and the failure process.

아스팔트 혼합물의 물리적 특성을 이용한 간접인장강도의 특성 분석 (The Analysis of Indirect Tensile Strength (ITS) Characteristic using Physical Properties of Asphalt Mixtures)

  • 이문섭
    • 한국도로학회논문집
    • /
    • 제16권6호
    • /
    • pp.19-25
    • /
    • 2014
  • PURPOSES : This study was performed to evaluate the possibility of Indirect Tensile Strength (ITS) as a testing method that can predict cracking on pavement. METHODS : Three asphalt binders and one kind of aggregate were used in this study, and all asphalt mixtures were produced using Gyratory Compactor followed asphalt mix design. The ITS test was performed for the mixture which are artificially short-term aged using the oven. The ITS properties were analyzed by air void, compaction temperature, asphalt content, and asphalt binder. RESULTS : The results of this study indicated that (1) the compaction temperature did not show relationship with the ITS test; (2) there was no specific trend between the asphalt content and the ITS test; (3) the ITS could reveal the property of kinds of asphalt binders; (4) the asphalt mixture that were produced at optimum temperature suggested by manufacturer did not exhibit optimum result for all asphalt binder. CONCLUSIONS : The possibility of ITS was confirmed from this study for replacement of the Marshall Stability method. However, it needs to perform in further studies of aggregate and compaction property to suggest a new ITS standard value.

석산에서 발생하는 슬러지 미립분의 혼입률 변화에 따른 시멘트 모르타르의 강도 및 흡수 특성 (Strength and Absorption Properties of Cement Mortar Produced with Various Content of Sludge Powder at Mines)

  • 한천구;신병철;김기철;이상태
    • 콘크리트학회논문집
    • /
    • 제13권6호
    • /
    • pp.561-567
    • /
    • 2001
  • 석산에서 부순잔골재를 생산시에는 다량의 슬러지 미립분이 배출되고 있다. 그러나, 실무현장에서는 슬러지의 일부를 매립용등에 제한적으로 사용할 뿐, 대부분은 방치되거나 무분별하게 버려지고 있어 막대한 경제적 손실과 환경오염 문제를 유발시키고 있다. 따라서 본 연구에서는 석산폐기물인 슬러지를 공장제품용 시멘트 모르타르 제조에 골재대체용 충전재로 활용하기 위하여, 골재 종류 및 모르타르 배합비 등에 미립분 혼입률을 변화시켜 시멘트 모르타르의 강도 및 흡수 특성을 검토하였다. 연구결과, 시멘트 모르타르 제품을 제조할 때 슬러지를 골재에 10% 정도 대체하여 혼입하게 되면 기존의 시멘트 모르타르 제품보다 향상된 품질의 제품이 생산될 수 있는 것이 확인되었다.

Mechanical properties of sustainable green self-compacting concrete incorporating recycled waste PET: A state-of-the-art review

  • Shireen T. Saadullah;James H. Haido;Yaman S.S. Al-Kamaki
    • Advances in concrete construction
    • /
    • 제16권1호
    • /
    • pp.35-57
    • /
    • 2023
  • Majority of the plastic produced each year is being disposed in land after single-use, which becomes waste and takes up a lot of storage space. Therefore, there is an urgent need to find alternative solutions instead of disposal. Recycling and reusing the PET plastic waste as aggregate replacement and fiber in concrete production can be one of the eco- friendly methods as there is a great demand for concrete around the world, especially in developing countries by raising human awareness of the environment, the economy, and Carbon dioxide (CO2) emissions. Self-compacting concrete (SCC) is a key development in concrete technology that offers a number of attractive features over traditional concrete applications. Recently, in order to improve its durability and prevent such plastics from directly contacting the environment, various kinds of plastics have been added. This review article summarizes the latest evident on the performance of SCC containing recycled PET as eco-friendly aggregates and fiber. Moreover, it highlights the influence of substitution content, shape, length, and size on the fresh and properties of SCC incorporating PET plastic. Based on the findings of the articles that were reviewed for this study, it is observed that SCC made of PET plastic (PETSCC) can be employed in construction era owing to its acceptable mechanical and fresh properties. On the other hand, it is concluded that owing to the lightweight nature of plastic aggregate, Reusing PET waste in the construction application is an effective approach to reduces the earthquake risk of a building.