• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.2
• /
• pp.113-120
• /
• 1982

In the previously reported Part I, the experimental results in frictional machining that finished medium carbon steel SM 50 C under 6 kinds of liquid atmospheres by using ceramic tip as a frictional tool was described. The present study reports the experimental results that all the machining conditions are same in the Part I except tool material changed ceramics into tungsten carbide. The ceramic tool material is a stable oxide and a non-metallic material, but the tungsten carbide has the metallic characteristics that adhere to carbon steel at about 750.deg.C. The present study shows th comparison of the experimental results for the above 2 kinds of frictional tool material.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.524-529
• /
• 2004

Recently High precision positioning device is used in many kinds of manufacturing and scientific instruments. Piezoelectric transducer is applied to the positioning devive as actuator, PZT has a high resolution, however, moving range is short. Many researcher have developed the mechanism for increasing a motion range. The types of increasing motion range mechanism with PZT are inertial slider, friction driver, ultrasonic motor, etc. In this paper we discuss the review of the hish precision actuator mechanism with PZT. Many kinds of mechanism for high precision are shown and compared.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.43-48
• /
• 2009

This paper surveys the mechanical properties of nylon high tenacity coarse yarn and fabric for military and technical textiles. For this purpose, 6 kinds of yarns and 2 kinds of fabrics are prepared. The yarn physical properties such as yarn count, thermal shrinkages, and tensile properties are measured and discussed with the characteristics of the domestic and imported yarns. And, the physical and mechanical properties of these fabrics are also measured and discussed with the usage of these fabrics in the military and technical textiles fields. Hereafter, the differences of physical properties between domestic and foreign yarn specimens for high functional military and technical fabrics are estimated through this study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.146-155
• /
• 2012

This study aims to analyze durability by comparing displacement on vibration at driving bicycle frame models of 1, 2, 3 and 4. Among maximum equivalent stresses at 4 kinds of models, model 1 has highest value with 410.39 MPa and becomes 30 times than model 4 with lowest value. The natural frequency number at Model 4 increases more than the other models. Among four models, the number of frequency at model 1 becomes lowest at harmonic vibration with real loading condition. In cases of four kinds of models, the maximum stress is shown near the assembly of rear wheel and the maximum displacement is shown near saddle assembly at this harmonic condition. The structural result about this study can be effectively utilized on the design of bicycle frame by investigating durability and prevention against its damage.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.75-89
• /
• 2010

The purpose of this study is to provide information how to locate a apparel store based on target age, merchandise's type and price. Three trade areas in Seoul are chosen: Myeong-dong which is the biggest trade area in Korea; Kangnam station one of representative Kangnam trade areas; and Myeongil-Dong a neighborhood trade area. This study is mainly performed by analysing the locations of the stores in the given areas. The result shows that the main apparel stores in Myeong-dong are casual wear stores for young people with the range of mid-high price. The stores in Kangnam station trade area also sell the casual wear for young people but they are mostly mid-low priced. In the trade area of Myeongil-dong, however, there are various kinds of mid-priced apparel stores for residents of all ages. Apparel stores for formal wear, casual wear, and formal-casual wear tend to be located side by side. But other kinds do not. These results show that affinity is found in some types of apparel stores by the analysis of the next-door apparel stores.

• Journal of Fashion Business
• /
• v.14 no.1
• /
• pp.176-183
• /
• 2010

The purpose of this study is to examine the antibacterial activity and deodorization of fabrics dyed with pine needles extract. The microbes used for a test were two kinds of bacteria and two kinds of fungi. The test results showed as follows. In the test results of antimicrobial activity, both cotton and silk fabrics showed the antimicrobial rate of over 90% after washing three times. In the test result of antifungal activity, all fabrics didn't show any effective antifungal activity. In the test result of deodorization, the dyed cotton fabric showed the higher rate of deodorization than the non-dyed fabric, and the fabric showed the highest rate of deodorization was the test fabric mordanted by Fe and the rate of deodorization showed 92%. In case of silk fabric, the fabric showed the highest rate of deodorization was the test fabric mordanted by Al, and the rate of deodorization showed 92%.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.553-587
• /
• 2012

In this study, the Korean cookbook, Jusiksiui, which was published in the late 1800s, was investigated. The results revealed that Jusiksiui contained more than 100 foods. Specifically, 12 staple foods were foods recorded including five types of porridge, three types of noodles, and four kinds of dumplings. Moreover, 49 side dishes were present, among which Jjim (steamed food) was most common, being recorded ten times. Additionally, seven types of Jeon (pancake) & Gui (roasted food) and Kimchi & Jangajji (pickled vegetables), four kinds of soup and Jeongol (stew), stir-fry, Sukyuk (boiled beef), and three types of Sukchae and Sashimi were found. Moreover, 14 recipes for rice cakes, two recipes for Korean cookies and three recipes for drinks were found. Seven recipes for wine, including plain rice wine, medicated wine and flavored wine, were also found. Finally, four different soy sauces Jibjang (a kind of soy sauce paste), hot pepper paste, Cheonggukjang (fast-fermented been paste), and Jeupjihi and roasting hot pepper paste were observed.

• Journal of Food Hygiene and Safety
• /
• v.10 no.2
• /
• pp.65-71
• /
• 1995

Bacteriocins from lactic acid bacteria have attracted much attention in recent years because of their useful worth in increasing safety and extending shelf life of foods. These substances show an inhibitory effect against some food spoilage bacteria and food-borne pathogens. The inhibitory effect fo the bacteriocin produces by lactic acid bacteria against Listeria monocytogenes(L. monocytogenes) was examined in this study. The culture supernatants of 5 kinds of bacteria among the 10 kinds of testes lactic acid bacteria had the inhibitory activity against Listeria sp., various Gram positive and Gram negative bacteria. Bacteriocin produced by Lactobacillus plantarum(Lact. plantarum) LMG 7945 was the most active toward L. monocytogenes. Bacteriocin production of the Lact. plantarum LMG 7945 cultured on MRS broth was increased late logarithmic phase over early stationary phase. This bacteriocin was stable at heat treatment and acidic pH relatively; The activity was retained after heating at 121$^{\circ}C$ for 15min and was active in the pH range of 2~4 but was lost above pH 5.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.19-25
• /
• 1984

The experiment was undertaken to investigate the optimum condition in the effect of seam balance on seam puckering. Four kinds of fabrics were sewed with three kinds of yarns which were used with a seam balance of 90, 100, 110 and $120\%$. In this experiment, the following conclusions were obtained; The best appearance was achieved by a seam balance of $100\~120\%$ in Cotton fabrics, $100\~110\%$ in Rayon fabrics, $110\~120\%$ in Polyester fabrics and $120\%$ in Wool fabrics after laundering.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.97-103
• /
• 1997

Effects of fuel injection timing on the lean misfire limit of a sequential MPI SI engine has been investigated. To investigate the interaction of injection timing and intake flow characteristics, so called axial stratification phenomena, 4 kinds of different intake swirl port of the same combustion chamber geometry have been teated in a single cylinder engine test bench. And 2 kinds of fuel, gasoline and compressed natural gas(CNG), were used to see the effect of liquid fuel vaporization. Result shows that combination of port swirl and injection timing governs the lean misfire limit and lean misfire limit envelopes remain almost the same for a given ratio regardless of engine speed. It is also found that two phase flow has some effects on lean misfire limit.