• 한국산업융합학회 논문집
• /
• 제9권1호
• /
• pp.5-11
• /
• 2006

This study was performed to determine the effect of structural characteristics of selected wool fabrics on mechanical and thermal properties. 52 wool fabrics, including 18 plain woven fabrics and 34 twill and satin woven fabrics were used as samples woven with various weft density for the study. Several physical characteristics such as mechanical properties, keeping warmth ratio of wool fabrics were measured. Data analyses including 1) analysis of tactile and thermal comfort sensation were performed. the following were obtained from the results: The main factors affecting keeping warmth ratio were thickness and bulk density. The keeping warmth ratio of samples increased with increasing thickness and decreasing bulk density of samples. In addition, coefficient of friction of the samples increased with keeping warmth ratio of samples. The above results show that wearing sensation and comfort properties of fabrics are changed depending on the end-use, and thus, above results can be used to manufacture of fabrics for specific end-use with high comfort properties.

• 한국의류학회지
• /
• 제5권2호
• /
• pp.63-68
• /
• 1981

Succeding to Report I, to determine the effect of opening conditions and areas of clothes ($10\%,\;20\%,\;30\%,\;40\%$ of total area) on the warmth keeping properties, cooling method was employed by using Latin Square Design, The following results were obtained: 1) The warmth keeping ratio was varied with the opening conditions and the: order was downward, upward, horizontal and up & downward opening 2) The size of opening areas was in inverse proportion to the warmth keeping ratio, 3) In the horizontal opening, the thickness of air layers in clothes did not effect on the warmth keeping ratio.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.41-44
• /
• 1987

Researches were made on foot-warming, anti-bacteria and deodorant treatment. Feet, the very important organ to human body, perspire much and their temperature is lower than those of other parts. Hence, keeping feet warm, sanitary and deodorant is the area of this study. Latex sponge of activated carbon, impregnated open cell foam, treated with Vikol DZ-anti-bacteria finishing agent, was developed and tested for warmth-keeping by KSK 0560 test method and for sanitization by AATCC 90 HALO test method and for deodorization by wearing tests. The results show that the new developed latex spongee has warmth-keeping ratio of 2.5 times higher than that of the conventional spong and it has an excellent anti-bacteria effect. Actual wearing function tests also show that it improves significantly the performance of deodorization, sanitization, warmth-keeping and bulkiness.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.15-19
• /
• 2001

The purpose of this study was to determine the thermal characteristics of men's suits ensembles and their fabrics. For the study, 100% wool fabrics were woven with various fabric structure, fabric density and yam count and With the use of these, 12 men's suits were made with the same design. Physical characteristics that affect thermal transport properties, including drapery, cover factor; bulk density, keeping warmth ratio, vapor permeability, air permeability and porosity of the fabrics were measured. In addition, thermal resistance of men's suit ensembles, including Y-shirts, inner wear and socks was measured on the thermal manikin in the environmental chamber. The result of the study was as follows: 1. In terms of fabric structure, keeping warmth ratio of plain woven fabrics was higher than those of twill and satin woven fabrics and also, vapor and air permeability and porosity of plain woven fabrics were higher than those of twill and satin woven fabrics. 2. The result showed that thermal resistance of 12 ensembles were in the range of 0.77clo~0.97clo. 3. There was little correlation between woven condition such as, including structure, fabric density and yam count and thermal resistance of ensembles.

• 한국의류학회지
• /
• 제8권1호
• /
• pp.95-106
• /
• 1984

This experiment was conducted to determine the heat loss by the amount of perspiration from human body. Warmth keeping ratio determined by using cooling methods were as follows ; 1) The higher amount of moisture evaporation, the higher amount of heat loss was resulted 2) The cold feeling was found at the level of moisture content in clothes above 0.017 cc/$cm^3$ (amount of moisture evaporation; $160\times10^{-3}cc/cm^2{\cdot}min$) 3) There was no relationship between the characteristics of fabrics(kinds, density, were factor, moisture transpiration) and heat loss at the same moisture content.

• 농업과학연구
• /
• 제10권2호
• /
• pp.310-323
• /
• 1983

본연구(本硏究)는 기포제(起泡劑)가 경량(輕量) 콘크리트의 제조(製造)와 그 성질(性質)에 미치는 영향(影響)을 연구(硏究)하기 위하여 기포(起泡) 모르터의 압축(壓縮), 인장(引張) 및 휨 강도시험(强度試驗)과 흡수율시험(吸水率試驗)을 배합별(配合別), 기포제별(起泡劑別)로 실시(實施)하였으며, 본(本) 시험(試驗)의 결과(結果)를 요약(要約)하면 다음과 같다. 1. 압축(壓縮), 인장(引張) 및 휨 강도(强度)는 각기포제(各起泡劑)에서 빈배합(貧配合)보다 부배합(富配合)일수록, 기포제첨가량(起泡劑添加量)이 증가(增加)할수록 저하(低下)하는 경향(傾向)을 보였고, 기포제첨가량(起泡劑添加量)이 0.75%에서 강도저하(强度低下)가 크게 나타났으며, 강도(强度)의 저하율(低下率)은 J. A, D 기포제(起泡劑) 순(順)으로 높게 나타났다. 2. 배합비(配合比) 1:1, ${\sigma}_{28}$, 기포제첨가량(起泡劑添加量) 0.75%에서 압축강도(壓縮强度)가 기포제(起泡劑) D는 34.9%, 기포제(起泡劑) A는 47.8%, 기포제(起泡劑) J는 86.8%의 감소(減少)를 나타내고 있으며, 인장강도(引張强度)에서 기포제(起泡劑) D는 14.8%, 기포제(起泡劑) A는 20.2%, 기포제(起泡劑) J는 77.9%의 감소(滅少)를 나타내었고, 휨 강도(强度)에 기포제(起泡劑) D는 19.9%, 기포제(起泡劑) A는 35.0%, 기포제(起泡劑) J는 79.1%의 감소(減少)를 보이고 있어, 압축강도(壓縮强度)가 인장강도(引張强度) 및 휨 강도(强度)에 비(比)하여 강도(强度)의 저하율(低下率)이 높게 나타나는 경향(傾向)을 보였다. 3. 흡수율(吸水率)은 각기포제(各起泡劑)에서 부배합(富配合)보다 빈배합(貧配合)일수록, 기포제첨가량(起泡劑添加量)이 증가(增加)할수록 높게 나타나는 경향(傾向)을 보였고, 각배합(各配合)에서 수침초기(水浸初期)에 흡수율(吸水率)이 높게 나타났으며, J, A, D 기포제(起泡劑) 순(順)으로 흡수율(吸水率)이 높게 나타났다. 4. 시멘트 모르터에 기포제(起泡劑)를 첨가(添加)하였을 때 강도저하(强度低下)는 부득이(不得已)한 것이지만 경량성(輕量性), 단열성(斷熱性), 보온성(保溫性), 방음성(防音性), 내화성(耐火性)을 기대(期待)할 수 있기 때문에 저강도(低强度)를 요(要)하는 곳에 이용(利用)이 가능(可能)하다고 생각된다.