• 한국잡초학회지
• /
• 제10권2호
• /
• pp.122-129
• /
• 1990

Alginate와 Kaoline을 저장매체(貯藏媒體)로 사용(使用)하여 제제(製劑)한 Butachlor[N-(butoxymethyl)-2-chloro-2', 6'-diethylacetamlide] 방출조절제(放出調節劑)의 특성(特性) 및 주성분(主成分) 용출양상(溶出樣相)을 암조건(暗條件)과 일광노출(日光露出) 조건하(條件下)에서 zeolite 흡착형립제(吸着型粒劑)와 비교시험(比較試驗)하였다. Calcium alginate-Kaoline 저장체(貯藏體)에의 butachior제제율(製劑率)은 91.8%이상(以上)이었고 제품(製品)의 수율(收率)은 kaoline의 첨가량(添加量)이 증가(增加)할수록 감소(減少)하였다. 방출조절제(放出調節劑)의 수중(水中) 주성분(主成分) 용출속도(溶出速度)는 시험조건(試驗條件)에 관계(關係)없이 zeolite흡착형립체(吸着型粒劑)보다 완만(緩慢)하였고 kaoline의 함량(含量)이 증가(增加)할수록 그 속도(速度)는 현저(顯著)하게 감소(減少)하였다. 일광노출조건(日光露出條件)에서 수증기(水蒸氣)와의 공증류(共蒸溜)에 의(依)한 용출주성분(溶出主性成分)의 감소율(減少率)은 kaoline의 함량(含量)이 증가(增加)할수록 저하(低下)되는 경향(傾向)을 보였다.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.93-102
• /
• 2002

Using a simple continuous optical technique, coupled with measurements of zeta potential, the flocculation characteristics of kaoline suspensions of different content(15, 35 and 55 NTU) by several cationic polyelectrolytes, has been examined. The optimum mixing is obtained under a constant stirring of 200 rpm, differently from a general flocculation test. The charge density of a polyelectrolyte is important in determining the optimum dosage and in the removal of kaoline particles. The optimum dosage is less for the polyelectrolyte of higher charge density and is the same regardless of kaoline content. At the dosage, the removal of kaoline particles is higher for the polyelectrolyte of higher charge density and zeta potential of kaoline particles reaches to near zero. The rate of adsorption and flocculation rate have been found to be affected by charge density and molecular weight of a polyelelctrolyte and the content of kaoline particles.

• 산업기술연구
• /
• 제10권
• /
• pp.83-88
• /
• 1990

The samples used for this work were low grade c1ay($Fe_2O_3$ : 2.90%, $TiO_2$ : 1.65%) produced from Youngsan-po district, and for the iron-bearing impurities removal having a bad influence on Kaoline sample was carried out column floatatoin using Oleic acid, Potassium oleat, Aero 840 promotor, Aero 870 promotor and Keroseneas collectors. For removal of the iron-vearing impurities from the kaoline, investigated first chemical composition size distribution of Kaoline sample, also performanced a basic study on pulp density, collector and pH change on a sort of frother. The flotation separation of impurities from kaoline can be achieved by using both oleic acid and Aero 840 promotor as collectors within narrow acid limits(pH 2-3). Pine oil was more effective frother than MIBC with olelic acid as aa collector.

• 한국환경과학회지
• /
• 제15권11호
• /
• pp.1027-1034
• /
• 2006

Antimicrobial powder was made by exchanging silver ion on calcined oyster shell. On the purpose of application to water clarifier, bail-type media mixed with antimicrobial powder and $0{\sim}30%$ white kaoline were made. The sterilization effect, pore size distribution and zeta potential was tested to indicate the condition for the media of water clarifier. From these tests, it was confirmed that this media have an excellent sterilization power on $G^-\;and\;G^+$ germs. As the concentration of the exchanged silver ion increased, the surface charge density of the anions on the surface of the media also increased. The surface pore size decreased with the concentration of silver ion and 20% more white kaoline ratio. Consequently, mixing ratio of white kaoline would appear to indicate the optimun condition as media have sterilization power.

• 한국환경과학회지
• /
• 제12권8호
• /
• pp.861-870
• /
• 2003

Using a simple continuous optical technique, coupled with measurements of zeta potential, the effects of polyelectrolyte dosage, kaoline particles and pH on flocculation of humic acid by several cationic polyelectrolytes, have been examined. The charge density of a polyelectolyte is important in determining the optimum dosage and in the removal of humic acid. The optimum dosage is less for the polyelectrolytes of higher charge density and is the same regardless of the presence of kaoline particles of different turbidity. At the dosage, the removal of humic acid is higher for the polyelectrolytes of higher charge density and the zeta potential of humic acid approaches to near zero, With increasing pH of humic acid, the optimum dosage increases and the flocculation index value obtained at the dosage decreases in the following pH 7 ＞ pH 5 ＞ pH 9, regardless of polyelectrolytes.

• 농약과학회지
• /
• 제11권4호
• /
• pp.276-280
• /
• 2007

잎들깨 종자의 파종 밀도 조절을 위해 종자코팅 용도로 사용된 엔도설판 분제에 의한 시설재배지 토양중 endosulfan의 잔류량을 경감시키기 위하여 이를 대체할 수 있는 종자코팅재료의 선발 및 이들이 미치는 발아영향을 조사하였다. 코팅재료는 talc, kaoline, 패화석등 석회류가 가능하였다. 코팅재료의 종자부착을 위한 접착제로는 식용유, 전착제, 알코올, 증류수 순이었으나 종자 발아영향은 반대경향을 나타냈다. 코팅재료별 종자부착성은 패화석, 생석회, 석회, talc, kaoline이 양호하였으나 토양과의 색깔 구별성은 패화석등 석회류에 비해 talc, kaoline이 좋았다. 선발 코팅제를 종자에 부착시 잎들깨의 발아율은 talc, kaoline이 양호하였고 토양과의 색깔 구별성도 양호하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.131-134
• /
• 2001

This research was carried out to evaluate the effects of humic acid on contaminated kaoline with cadmium when electrokinetic remediation. Electrokinetic remediation test was performed depending on humic acid concentrations(0.005, 0.01, 0.05, 0.083, 0.1, 0.5, 5.0mg/g) in contaminated kaoline with cadmium and time(4, 8, 12days). In the absence of humic acid, Cd at the anode showed the highest concentration while Cd concentrations were lower as the concentration of humic acid increased. The removal of Cd to the anode reservoir was increased with increasing humic acid concentration by electroosmosis or ion migration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.691-695
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, MgCl$_2$are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• 한국환경과학회지
• /
• 제26권5호
• /
• pp.563-572
• /
• 2017

The Electrocoagulation-Flotation (ECF) process has great potential in wastewater treatment. ECF technology is effective in the removal of colloidal particles, oil-water emulsion, organic pollutants such as microalgae, and heavy metals. Numerous studies have been conducted on ECF; however, many of them used a conventional plate-type aluminum anode. In this study, we determined the effect of changing operational parameters such as power supply time, applied current, NaCl concentration, and pH on the turbidity removal efficiency of kaoline. We also determined the effects of different electrolyte types (NaCl, $MgSO_4$, $CaCl_2$, $Na_2SO_4$, and tap water), as well as the differences caused by using a plate-type and mesh-type aluminum anode, on the turbidity removal efficiency. The results showed that the optimal values of ECF time, applied current, NaCl concentration, and pH were 5 min, 0.35 A, 0.4 g/L NaCl in distilled water, and pH 7, respectively. The results also revealed that the turbidity removal efficiency of kaoline in different electrolytes decreased in the following sequence, given the same conductivity: tap water > $CaCl_2$ > $MgSO_4$ > NaCl > $Na_2SO_4$. The turbidity removal efficiency of the mesh-type aluminum anode was significantly greater than the plate-type aluminum anode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1785-1787
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, $MgCl_2$ are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.