• 한국화재소방학회논문지
• /
• 제29권5호
• /
• pp.29-33
• /
• 2015

본 연구에서는 노즐의 형상변화에 따라서 방사유량, 살수분포 그리고 액적크기를 측정하였다. 이를 위해서 중심부 직경이 6.0 mm이고 반지름 방향 방사각도가 $142^{\circ}$와 $148^{\circ}$인 이중 구조의 미세 물분무 노즐(LPN142, LPN148) 형상을 제작하여 UL2167 시험규격에 의해서 살수분포와 분사거리의 관계를 정량화하였다. Hellium-Neon 레이져에 의한 광학적 분석 방법을 적용하여 방사유량 변화에 따라서 웨버 수와 액적 크기 그리고 방사각도에 관한 경험식을 구하였으며, 전달 방정식의 주요인자인 소멸 항과 액적크기의 상관관계를 분석하였다. 그 결과 이중 구조의 미세 물분무 노즐은 최소허용 유량범위가 결정된 경우 작동압력, 분사거리, 액적 직경을 예측하여 화재특성을 분석함으로써 노즐 선정이 가능할 것으로 사료된다.

• Journal of Chest Surgery
• /
• 제50권4호
• /
• pp.247-254
• /
• 2017

Background: Hybrid coronary revascularization (HCR) was developed to combine the advantages of coronary artery bypass graft (CABG) with percutaneous coronary intervention (PCI). However, it is still controversial whether it is more optimal to perform CABG or PCI first. The purpose of this study was to compare the clinical outcomes of these 2 approaches. Methods: Eighty patients who underwent HCR from May 2010 to December 2015 were enrolled in this retrospective analysis. The CABG-first group comprised 12 patients and the PCI-first group comprised 68 patients. Outcomes of interest included in-hospital perioperative factors, major adverse cardiac and cerebrovascular events (MACCEs), and the incidence of repeated revascularization, especially for the target vessel lesion. Results: No significant difference was found in the amount of postoperative bleeding (p=0.239). The incidence of MACCEs was similar between the CABG-first and PCI-first groups (1 of 12 [8.3%] vs. 5 of 68 [7.4%], p>0.999). Repeated revascularization was performed on 3 patients (25%) in the CABG-first and 9 patients (13.2%) in the PCI-first group (p=0.376). Conclusion: There were no significant differences in postoperative and medium-term outcomes between the CABG-first and PCI-first groups. Based on these results, it can be inferred that it is safe to opt for either CABG or PCI as the primary procedure in 2-stage HCR.

• 설비공학논문집
• /
• 제22권12호
• /
• pp.859-866
• /
• 2010

This study examined the economics of a solar water heating system for an office building using life cycle cost (LCC) optimization simulations. The numerical simulations were conducted with TRNSYS and GenOpt employing the Hooke-Jeeves algorithm. The solar collector area, slope, mass flow rate per collector area and storage tank volume were selected as the main design parameters of the solar water heating system. The LCC optimization simulations of the system were carried out for cases where water temperature was $60^{\circ}C$ and $50^{\circ}C$. The results showed that for water temperature at $60^{\circ}C$ and $50^{\circ}C$ the collector area could be decreased by 17% and 28%, storage tank volume could be decreased by 49% and 54%, and mass flow rate per collector area increased by 5% and 9% respectively compared to a non-optimized system. The LCC of the system was reduced by 4% for $60^{\circ}C$ and 7% for $50^{\circ}C$. The initial installation cost of the system was reduced by 24% for $60^{\circ}C$ and 34% for $50^{\circ}C$. However, the operating cost of the system increased by 16% for $60^{\circ}C$ and 36% for $50^{\circ}C$ compared to a traditional solar water heating system.

• 한국약용작물학회지
• /
• 제21권1호
• /
• pp.39-44
• /
• 2013

This study was conducted to identify the effect of shading and pinching on growth and acanthoside-D content of Acanthopanax divaricatus var. albeofructus and A. koreanum Nakai. Different pinching heights showed no significant differences in terms of plant growth and acanthoside-D content but higher values showed that pinching A. divaricatus at 60 cm and A. koreanum at 30 cm favored good growth and higher fresh weight in the shoots. The content of acanthoside-D was not significantly affected by pinching heights. Also, no significant difference in acanthoside-D content was found between the lower and upper part of plant in the first year. However it was much higher in the lower part than the upper part in the second year, which indicated that the content of acanthoside-D was comparatively high in the lower part where lignification is much advanced. Shading showed benefits in terms of growth of A. divaricatus while only 50%-shading was favorable for A. koreanum to achieve superior growth. Overall, results indicated that shading had favorably affected the growth of the 2 Acanthopanax species while no-shading is better if we opt to achieve higher acathoside D content.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.89-98
• /
• 2011

This study examined the energy performance according to the main design parameters of a solar water heating system for an office building using the life cycle cost (LCC) optimization simulations. The LCC optimization simulations of the system were conducted with TRNSYS and GenOpt employing the Hooke-Jeeves algorithm for cases where water temperature was $60^{\circ}C$ and $50^{\circ}C$. The results showed that for water temperature at $60^{\circ}C$ and $50^{\circ}C$ the global radiation incident on the collector could be decreased by 16.98% and 28.52%, collector useful energy gain could be decreased by 15.04% and 22.59%, energy to load from storage tank could be decreased by 10.86% and 18.06% and AH energy to load could be increased by 16.86% and 38.50% respectively compared to a non-optimized system. The annual average collection efficiency of the collector was increased by 0.88% for $60^{\circ}C$ and 2.78% for $50^{\circ}C$ because of increase of collector slope and decrease of the mass flow rate per collector area. The annual average efficiency of the system was increased by 1.74% and 3.47% compared to the basis system. However, the annual solar fraction of the system was decreased by 6.68% for $60^{\circ}C$ and 11.26% for $50^{\circ}C$ due to decrease of collector area and storage tank volume.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.162-175
• /
• 2008

Gyeongju, which was the central city of the ancient civilization at Silla Kingdom, has various kinds of stone cultural properties. It is significantly important to preserve historical sources of Korea. However, recent air quality data measured in Gyeongju did not show good air quality level. In order to investigate variation of the concentration of the air pollutants with meteorological condition, an air quality monitoring and an aerosol sampling were conducted during the intensive monitoring period in Gyeongju. Impacts of the meteorological factors on the air pollutants were also analyzed based on the air mass pathway categories using HYSPLIT model and the local wind patterns using MM5 model. The prevailing air mass pathways were classified into four categories as following; category I affected by easterly marine aerosols, category II affected by northwesterly continental aerosols, category III affected by southwesterly continental aerosols, and category IV affected by northerly continental aerosols. The concentrations of the air quality standards were relatively lower during the fall intensive monitoring period. At that time, the easterly marine air mass pattern was dominated. The seasonal average mass concentration of $PM_{10,Opt}$, which optically measured at the monitoring site, was the highest value of $77.6{\pm}28.3\;{\mu}g\;m^{-3}$ during the spring intensive monitoring period but the lowest value of $20.1{\pm}5.3\;{\mu}g\;m^{-3}$ during the fall intensive monitoring period. The concentrations of $SO_2$ and CO were relatively higher when the air mass came from the northwestern continent or the northern continent. The concentrations of ${SO_4}^{2-}$ and ${NO_3}^-$ increased under the northwesterly continental condition. It was estimated that the acidic aerosols were dominated in the atmosphere of Gyeongju when the air mass came from the continental regions.

• 지능정보연구
• /
• 제15권3호
• /
• pp.137-150
• /
• 2009

본 연구는 시간 제약조건을 가지는 차량 경로 탐색과 스케줄링 문제(VRSPTW, the Vehicle Routing and Scheduling Problem with Time Window)를 해결하기 위하여, 기회시간(Opportunity time)을 반영한 하이브리드 휴리스틱을 제안하였다. 기회시간은 각 고객 노드에서 요구하는 하역 서비스를 수행 한 뒤에도 남아 있는 여유시간이다. 제안된 휴리스틱은 기회시간에 대한 제약조건을 추가하고, 기회시간을 고려한 비용 평가함수를 삽입 전략에 적용함으로써 초기 해를 구하였다. 또한 고객 노드 교환에 의한 타부 탐색 전략에도 기회시간을 반영함으로써 해를 개선 시켰다. 마지막으로 지리적, 시간적, 용량적으로 다양한 데이터 유형들에 대하여 각각 효과적으로 최적 해를 구할 수 있는 초기 경로 생성 전략들을 소개하고 비교하였다. 본 연구의 실험에서는 제안된 휴리스틱이 Solomon I1 휴리스틱 보다 효율적으로 최근사 해를 얻을 수 있음을 보였다.

• 농촌지도와개발
• /
• 제24권3호
• /
• pp.173-183
• /
• 2017

The purpose of this study was to identify differences by business motivation of agro-healing farm s in Korea. A survey was conducted for entrepreneurs in agro-healing farmers with self-administered questionnaires. Main results of this study were as follows: First, business motivation of agro-healing farm s in Korea can be classified to 1) education-oriented, 2) care-oriented, and 3) sale revenue-oriented motivation. Second, care-oriented farms provide healing services to people in need like the disabled. These farms may be required a long-term program such as residence-required format. And these farms need supports of health and medical service personnel or institutions. Third, sale revenue-oriented farms have sources of main income from agricultural products or processed goods made in these farms. Therefore, these farms may be required a business strategy such as product development, marketing rather than agro-healing programs. fourth, the estimation of a Multinominal logistic regression model determines the characteristics of agro-healing entrepreneurs who are most likely to opt for each type motivation of participating for agro-healing farm business. the most important determinants on business motivation of agro-healing farms were 'participants type in programs', 'program operating time', 'supporting health and medical service personnel or institutions' and 'program revenue ratio in farm operating revenue'.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.943-953
• /
• 2007

본 논문에서는 Ka-band에서 동작하는 스칼라 급전 혼을 가진 카셋그레인 안테나를 개발하였다. 카셋그레인 안테나의 효과적인 EM 시뮬레이션을 위해 계산된 급전 혼의 근거리장을 표면 등가 이론을 이용하여 카셋그레인의 등가 전원으로 사용하였다. 급전 혼은 $HE_{11}$ 모드로 동작하는 주름 원형 혼 안테나를 사용하였으며, 카셋그레인의 주 부경 각도 및 급전 중심점을 안테나 효율이 최대가 되도록 설계하였다. 제안된 급전 혼 안테나는 33 GHz에서 19 dBi 이득을 보이며, 부엽의 크기는 -25dB 이하, $20^{\circ}$의 반전력 빔 폭을 가졌다. 카셋그레인 안테나는 33GHz에서 41 dBi 이득을 가져 60%의 안테나 효율을 보이며 부엽기 크기는 -20dB 이하, $1.2^{\circ}$의 반전력 빔 폭을 보였다.

• 공업화학
• /
• 제10권3호
• /
• pp.343-348
• /
• 1999

저온 공정이 가능한 rf-plasma를 이용한 화학증착법으로 기판의 온도, 출력, $SiH_4$와 천음 함유한 유기화합불 진구체의 희석비 등을 변수로 각 실험 조건에 따라 iron silicide를 제조하였다. 일반적으로 iron silicide 막은 다단계 공정의 Ion Beam Synthesis (IBS)법으로 성장시키고 있으나, 플라즈마를 사용함으로써 단일공정에 의해 $Fe_aSi_bC_cH_d$로 결합된 iron silicide 및 ${\beta}$-상이 형성될 수 있음을 확인하였다. 철 전구체와 실란 (silane)의 희석비에 따라 막 내에 존재하는 탄소와 수소양의 차이로 인해 서로 다른 막의 특성을 나타내었다. 기관의 온도에 따른 광학에너지갭 ($E_b^{opt}$)은 박 표면에 존재하는 수소가 탈착되면서 제공할 수 있는 활성점이 한정되어 있기 때문에 큰 변화가 없었다. 240 watt 이하의 출력에서는 광학에너지갭이 감소하였고, 240 watt 이상의 높은 출력에서는 식각에 의해 미결합수가 증가하여 광학에너지갭은 높게 나타났다.