• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.1
• /
• pp.45-53
• /
• 1995

Working depth of the model net was determined by using of the same experimental tank and the same model net that used in the forwarded report in a series studies. The depth of the net which indicates the depth of the head rope from the water surface, was determined by the photographs taken in front of the net mouth with the combination of towing velocity, warp length and distance between paired boats. The results obtained can be summarized as follows: 1. Working depth of model nets A and B was varied in the range of 0.09~1.66$m$,and 0.04~1.34$m$(which can be converted into 2.7~40.2$m$and 1.2~49.8$m$in the full-scale net) respectively, and the depth of model net A was slightly deeper than the depth of the model net B. 2. Working depth ($D$,which is appendixed m for the model net, f for the full-scale net, A and B for the types of the model nets) can be expressed as the function of towing velocity$V_t$, as in the model net($V_t$=$m$/$sec$) $D_{mA}$=(-1.99+0.65$L_w$) $e^{-1.72V_t}$ $D_{mA]$=(-1.91+1.04 $L_w$) $e^{2.88V_t}$ in the full-scale net($V_t$=$k$'$t$ $D_{fA}$=(-29.32+0.65$L_w$)$e^{0.40 V_t}$ $D_{fB}$=(-57.60+1.04$L_w$)$e^{-0.67 V_t}$ 3. Working depth 9$D$ appendixes are as same as the former) can be expressed as the function of warp length$L_w$) in the model net, and can be converted into full-scale net as in the model net ($V_t$=$m$/$sec$) $D_{mA}$=-0.99 $e^{-1.42V_t}$+0.67$e^{-1359V_t}$$L_w$ $D_{mB}$=-.258$e^{-3.77V_t}$+1.16$e^{-3.15V_t$ $L^w$, in the full-scale net($V_t$=k't) $D_{fA}$=-29.28$e^{-0.32V_t}$+0.67$e^{-0.37V_t$$L_w$ $D_{fB}$=-69.10$e^{-0.81V_t}$+1.16$e^{-0.72V_t}$$L_w$. 4. Working depth was gradually shallowed according to the increase of the distance between paired boats.

• Journal of Food Hygiene and Safety
• /
• v.28 no.2
• /
• pp.168-173
• /
• 2013

This study was carried out to develop and validate predictive models of E. coli O157:H7 growth. Growth data of E. coli O157:H7 in Paprika were collected at 12, 24, 30 and $36^{\circ}C$. The population increased into 3.0 to 3.8 log10 CFU/g within 4 days, then continued to increase at a slower rate through 10 days of storage at $12^{\circ}C$. The lag time (LT) and maximum specific growth rate (SGR) obtained from each primary model was then modeled as a function of temperature using Davey and square root equations, respectively. For interpolation of performance evaluation, growth data for a mixture of E. coli O157:H7 were collected at time intervals in paprika incubated at the different temperatures, which was not used in model development. Results of model performance for interpolation data demonstrated that induced secondary models showed acceptable goodness of fit. Relative errors in the LT and SGR model for interpolation data (18 and $27^{\circ}C$) was 100%, which show acceptable goodness of fit and validated for interpolation. The primary and secondary models developed in this study can be used to establish tertiary models to quantify the effects of temperature on the growth of E. coli O157:H7 in paprika.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2012

This study calculated kinetic parameters of Escherichia coli O157:H7 and developed a probabilistic model to estimate growth probabilities of E. coli O157:H7 on polyethylene cutting boards as a function of temperature and time. The surfaces of polyethylene coupons ($3{\times}5$ cm) were inoculated with E. coli O157:H7 NCCP11142 at 4 Log $CFU/cm^2$. The coupons were stored at 13 to $35^{\circ}C$ for 12 h, and cell counts of E. coli O157:H7 were enumerated on McConkey II with sorbitol agar every 2 h. Kinetic parameters (maximum specific growth rate, Log $CFU/cm^2/h$; lag phase duration, h; lower asymptote, Log $CFU/cm^2$; upper asymptote, Log $CFU/cm^2$) were calculated with the modified Gompertz model. Of 56 combinations (temperature${\times}$time), the combinations that had ${\geq}$0.5 Log $CFU/cm^2$ of bacterial growth were designated with the value of 1, and the combinations that had increases of <0.5 Log $CFU/cm^2$ were given the value 0. These growth response data were fitted to the logistic regression to develop the model predicting probabilities of E. coli O157:H7 growth. Specific growth rate and growth data showed that E. coli O157:H7 cells were grown at $28-35^{\circ}C$, but there were no obvious growth of the pathogen below $25^{\circ}C$. Moreover, the developed probabilistic model showed acceptable performance to calculate growth probability of E. coli O157:H7. Therefore, the results should be useful in determining upper limits of working temperature and time, inhibiting E. coli O157:H7 growth on polyethylene cutting board.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.205-212
• /
• 2007

Parabolic approximation wave models based on $Pad{\acute{e}}$ approximants are analyzed in order to calculate wave transformation. In this study a $Pad{\acute{e}}(2,2)$ parabolic approximation model is developed to increase the accuracy of computation in comparison with the existing models. Numerical studies on a constant sloping bed show that the new model proves to allow for much more successful treatment of large angles of incidence than is possible using the previously available models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.208-220
• /
• 2015

This study analyze Online class's current condition in Smart era. And suggest better operation model based on Internet Architecture. This study focuses the condition of e-learning operation model in University online class. Especially, 'Time Check Idea' that using for attendance on e-learning class has some side effects. So this study would applied 'Qualitative Check Idea Concept' on e-learning class. Question Based System, QBS is example model. QBS is leading a Learner's participation in e-class by Making Quiz. These quizs are shared with other students and refer to studing contents. Practically operating Qualitative Concept model QBS on university e-class, we can seek for the effectiveness of Qualitative e-learning model QBS.

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1051-1066
• /
• 2015

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

• International Commerce and Information Review
• /
• v.2 no.1
• /
• pp.25-48
• /
• 2009

With the rapid growth of e-logistics in the global logistics industry, it is important to gain further insight into this growing segment of Chinese logistics industry. The current situation in China consists of many small and medium-sized logistics firms. Furthermore, e-logistics is still relatively undeveloped in the majority of the Chinese logistics companies and presently there are still many problems unresolved. This paper attempted to review the concepts and theoretical background of e-logistics systems from previous studies. After acknowledging the essential issues related to e-logistics systems, a research model based on the theory acceptance model was designed and tested. The key factors to the e-logistics system (reliability, maintainability, software, facility and transportation) were validated through the modeling and testing process. Included in the modelling and testing process are other related factors of e-logistics process, logistics information system and added value as dependent variables in this model. The results of this study confirm that the e-logistics Process is affected by transportation, while maintainability and software factors influence logistics information system. reliability, maintainability, facility and transportation are significant factors associated with added value. This research aimed to provide theoretical and practical contribution to Chinese logistics companies and to give some insights into e-logistics system as a whole. The paper also provided some useful theoretical implication and practical guidelines for the development of e-logistics system in the chinese logistics industry.

• International Commerce and Information Review
• /
• v.11 no.2
• /
• pp.3-26
• /
• 2009

With the rapid growth of e-logistics in the global logistics industry, it is important to gain further insight into this growing segment of Chinese logistics industry. The current situation in China consists of many small and medium-sized logistics firms. Furthermore, e-logistics is still relatively undeveloped in the majority of the Chinese logistics companies and presently there are still many problems unresolved. This paper attempted to review the concepts and theoretical background of e-logistics systems from previous studies. After acknowledging the essential issues related to e-logistics systems, a research model based on the theory acceptance model was designed and tested. The key factors to the e-logistics system (reliability, maintainability, software, facility and transportation) were validated through the modeling and testing process. Included in the modelling and testing process are other related factors of e-logistics process, logistics information system and added value as dependent variables in this model. The results of this study confirm that the e-logistics Process is affected by transportation, while maintainability and software factors influence logistics information system. reliability, maintainability, facility and transportation are significant factors associated with added value. This research aimed to provide theoretical and practical contribution to Chinese logistics companies and to give some insights into e-logistics system as a whole. The paper also provided some useful theoretical implication and practical guidelines for the development of e-logistics system in the chinese logistics industry.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.776-779
• /
• 2006

Today, It has developed actively e-learning according to web without time and place which increase of PC user with super-highway information network and various up-to-date information rapid growth. It has to provide the chance to student which will be able to practice and to think free and originative under liberal learning environment that learner can compose knowledge through various thinking by themselves. From the present paper, I would design e-learning system using TGT model of cooperative e-learning system that more effective studying through advantage of e-learning studying. I look forward to helping improvement of student's real ability as embody competitive games method by TGT model's basic theory of web-based.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.643-646
• /
• 2005

In this paper, we present a service model which serves multimedia contents to end consumer(End-user) that have various mobile communication terminals under a communication & broadcasting converged environment that broadcasting and communication networks are linked. A main feature of this service model is that it has a distribution structure that deliver to end consumer via adaptation of content from production of contents offering End to End (E2E) media QoS and personalized contents consumption. The proposed service model may be used as a reference model for distribution of multimedia content in communication & broadcasting converged environment in the future.