• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.1-21
• /
• 1981

Populus glandulosa and Populus tomentiglandulosa, which were known to be natural hybrids, were examined for morphological, physiological and karyological traits to illucidate its hybridity and taxonomical importance. The results abtained were as follows; 1. Survival rate in rooting of cuttings and grafting was different between the hybrids and their rooting abilities showed incomplete dominance. 2. Their leaf openings showed incomplete dominance. The leaf longevities of P. alba ${\times}$ glandulosa and P. tomentiglandulosa were stronger than the other hybrids. 3. There were differences in resistance to toxicity of $KClO_3$ between the hybrids. 4. Many external leaf characters of the hybrids also showed incomplete dominance. P. tomentiglandulosa was similar in those characters to P. alba ${\times}$ glandulosa while P. glandulosa was similar to hybrids crossed, reciprocally crossed or back-crossed between P. davidiana and P. alba. 5. Their numbers of male flower showed incomplete dominance or hybrid vigor. The numbers of P. tomentiglandulosa were similar to thosa of P. alba ${\times}$ glandulosa while those of P. glandulosa to those of P. alba ${\times}$ davidiana or P. davidiana ${\times}$ alba. 6. Morphology and band color of male catkin bract showed incomplete dominance. Those of P. glandulosa were similar to those of P. alba ${\times}$ davidiana while those of P. tomentiglandulosa to those of. P. alba ${\times}$ glandulosa. 7. There were differences in vascular bundle number and arrangement of petiole between the hybrids. 8. Differences in the anatomical traits of stem did not exist between the hybrids but those in wood fiber size existed. 9. The chromosomes of artificial hybrids, P. glandulosa and P. tomentiglandulosa showed irregular behavior in metaphase I and II. 10. All hybrids including P. glandulosa and P. tomentiglandulosa showed small number of P.M.C. with 19 II but many univalent chromosomes were exhibited in metaphase I. 11. All hybrids including P. glandulosa and P. tomentiglandulosa showed a little abnormal nuclear plates as laggard chromosome and chromosome bridge in anaphase I and II. 12. The frequency of pollen tetrad and fertile pollen was low in most of the hybrids including P. glandulosa and P. tomentiglandulosa.

• Journal of Korean Society of Forest Science
• /
• v.81 no.3
• /
• pp.273-279
• /
• 1992

Protoplasts isolated from leaf mesophyll tissues of Populus koreana ${\times}$ P. nigra var. italica were fused with those of P. euramericana cv. Guardi. Well expended healthy leaves of 5 to 7 week-old-plantlet grown in vitro were used as source materials. Leaves from P. koreana ${\times}$ P. nigra var. italica and P. euramericana cv. Guardi were digested in enzyme solution I (2.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v) and enzyme solution II (1.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v), respectively, The highest frequency of fusion among the protoplasts originated from the two source materials was approximately 21% using 40% PEG or 15% dextran. In addition, fusion frequency was enhanced by incorporating 30mM of $Ca^{2+}$ in eluting solution at pH 10.5. Dividing cells and/or mint-calli were obtained by culturing the fusion products in a liquid 8p-KM medium supplemented with 0.6M sucrose, $0.45{\mu}M$ 2, 4-D, and $0.5{\mu}M$ BA. Shoots were regenerated from the fusion product-derived calli after culture on MS medium containing $5.0{\mu}M$ zeatin. To verify the putative hybrid or cybrid, SDS-PAGE was carried out. From the 24 regenerants, just two plants showed intermediate protein band patterns compared with those of the original source plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.25-30
• /
• 1978

Field experiments were conducted on the cropping system soybean-barley-soybean to investigate the effect of phosphorus and wollastonite application, effective application methods of phosphrus, and their residual effect in a typical Jeju island volcanic ash soil when the fertilizers were applied to the first crop of the three crops sequence. The results are summarized as follows. 1. Response of phosphorus was higher for barley than for soybean. The maximum application rate of phosphate was extimated to be 10-20kg/l0a for cultivation of soybean first crop) and 100kg/l0a for barley (second crop). Barley yield under 100kg/l0a of phosphate was double as compared to the no phosphate plot. 2. With application of 100kg/10a phosphate at the sowing time of soybean, the available phosphate in the soil after harvesting of soybean was increased to 175ppm but decreased to 60 ppm by cultivation of barley (second crop.) On the other hand, the phosphate absorption coefficient was 1,146mg/100g after soybean harvest but increased to 1,764mg/100g after barley harvest. 3. High residual effect was found in the plot to which phosphate applied with compost in the sowing band. 4. Response to wollastonite under heavy application of phosphate was high and residual effect was also great. 5. Response of soybean to wollastonite was higher than that of barley. Application of wollastonite increased the yield of all three crops soybean (first crop) by 30%, barley (second crop) by 12% and soybean (third) by 20%, respectively. Highest yield was obtained from the 1,000kg/10a wollastonite treatment for soybean and 500kg/l0a for barley.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.127-135
• /
• 2012

This paper introduced the flow forecast modeling system that a water management agency in west central Florida, Tampa Bay Water has been operated to forecast monthly rainfall and streamflow in the Tampa Bay region, Florida. We evaluated current 1-year monthly rainfall forecasts and flow forecasts and actual observations to investigate the benefits of incorporating rainfall forecasts into monthly flow forecast. Results for rainfall forecasts showed that the observed annual cycle of monthly rainfall was accurately reproduced by the $50^{th}$ percentile of forecasts. While observed monthly rainfall was within the $25^{th}$ and $75^{th}$ percentile of forecasts for most months, several outliers were found during the dry months especially in the dry year of 2007. The flow forecast results for the three streamflow stations (HRD, MB, and BS) indicated that while the 90 % confidence interval mostly covers the observed monthly streamflow, the $50^{th}$ percentile forecast generally overestimated observed streamflow. Especially for HRD station, observed streamflow was reproduced within $5^{th}$ and $25^{th}$ percentile of forecasts while monthly rainfall observations closely followed the $50^{th}$ percentile of rainfall forecasts. This was due to the historical variability at the station was significantly high and it resulted in a wide range of forecasts. Additionally, it was found that the forecasts for each station tend to converge after several months as the influence of the initial condition diminished. The forecast period to converge to simulation bounds was estimated by comparing the forecast results for 2006 and 2007. We found that initial conditions have influence on forecasts during the first 4-6 months, indicating that FMS forecasts should be updated at least every 4-6 months. That is, knowledge of initial condition (i.e., monthly flow observation in the last-recent month) provided no foreknowledge of the flows after 4-6 months of simulation. Based on the experimental flow forecasts using the observed rainfall data, we found that the 90 % confidence interval band for flow predictions was significantly reduced for all stations. This result evidently shows that accurate short-term rainfall forecasts could reduce the range of streamflow forecasts and improve forecast skill compared to employing the stochastic rainfall forecasts. We expect that the framework employed in this study using available observations could be used to investigate the applicability of existing hydrological and water management modeling system for use of stateof-the-art climate forecasts.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2000

The new green $Al_3GdB_4O_{12}:Tb^{3+} and red Al_3GdB_4O_{12}:Eu_{3+}$ phosphors were synthesized and then characterized their optical properties for PDP application. And also the photoluminescence properties of these phosphors were compared with the commercial green $Zn_2SiO_4:Mn^{2+} and (Y,Gd)BO_3: Eu^{3+}$ red PDP phosphors. The phosphors were synthesized by solid state reaction at 115$0^{\circ}C$ for 4hr. It was found that the emitting brightness of $Al_3GdB_4O_{12}:Tb^{3+}$(15mol%) green phosphor under 147nm excitation was higher than that of commercial $Zn_2SiO_4: Mn^{2+}$ green PDP phosphor. However, the color coordinate of this new green phosphor was inferior to the commercial one. On the other hand, the emitting intensity of $Al_3GdB_4O_{12}:Eu^{3+}$(15mol%) red phosphor was smaller than the $commercial(Y,Gd)BO_3: Eu^{3+}$ red one, but the CIE coordinate was slightly improved. The excitation spectrum showed that $Al_3GdB_4O_{12}$ phosphors had a strong excitation band at $\lambda=160nm$ associated with the host absorption. And the photoluminance excitation (PLE) intensity in VUV range for $Al_3GdB_4O_{12}:Tb^{3+}$ green phosphor was higher than that of $Zn_2SiO_4: Mn^{2+}$, but the PLE intensity of $Al_3GdB_4O_{12}:Eu^{3+}$ red phosphor was smaller than $(Y,Gd)BO_3: Eu^{3+}$.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2011

Design and Implementation of Clipcast Service via Terrestrial DMB This paper outlines the system design and the implementation process of clipcast service that can send clips of video, mp3, text, images, etc. to terrestrial DMB terminals. To provide clipcast service in terrestrial DMB, a separate data channel needs to be allocated and this requires changes in the existing bandwidth allocation. Clipcast contents can be sent after midnight at around 3 to 4 AM, when terrestrial DMB viewship is low. If the video service bit rate is lowered to 352 Kbps and the TPEG service band is fully used, then 320 Kbps bit rate can be allocated to clipcast. To enable clipcast service, the terminals' DMB program must be executed, and this can be done through SMS and EPG. Clipcast service applies MOT protocol to transmit multimedia objects, and transmits twice in carousel format for stable transmission of files. Therefore, 72Mbyte data can be transmitted in one hour, which corresponds to about 20 minutes of full motion video service at 500Kbps data rate. When running the clip transmitted through terrestrial DMB data channel, information regarding the length of each clip is received through communication with the CMS(Content Management Server), then error-free files are displayed. The clips can be provided to the users as preview contents of the complete VOD contents. In order to use the complete content, the user needs to access the URL allocated for that specific content and download the content by completing a billing process. This paper suggests the design and implementation of terrestrial DMB system to provide clipcast service, which enables file download services as provided in MediaFLO, DVB-H, and the other mobile broadcasting systems. Unlike the other mobile broadcasting systems, the proposed system applies more reliable SMS method to activate the DMB terminals for highly stable clipcast service. This allows hybrid, i.e, both SMS and EPG activations of terminals for clipcast services.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.145-165
• /
• 1990

This study examine closely conditions of costume between the Modernized period and Liberation with newspaper materials. Because newspaper generally appear society conditions in those days on rapid and across-the boad basis. The Modernized period is extremely change among history of costum (ordinance prohibiting top knots, allowance of foreign clothes putting on). Because this change have been spontaneously not by internal desired but Western input by the strong nation of imperialism to enclose Chosun, they was accepted by the general public later under the rule of Japaneses Imperialism. Consequently, study of costume play an important part periods between the Japanese annexation of Korea and Liberation. This study apply to newspaper characteric for costume, and closely examine an important costum condition of those days next time, and present costume material in those days that composed the account catalog appeared periods between the first publication(1920) of the Dong A II Bo, and in the year 1945, it is as follows. 1. Foreign clothes of men generally accept the general public on look at from form change, in the 1920's had come short Jackets and narrow throusers into fashion, in the 1930's had come trousers of generous waist band with broads shoulder and long Jackets. Catalog of Major clothes is as follows; Spring coat, Jacket, Vest, Shirt, etc. While pants had come trousers into fashion 2. Functional characteric of Foreign clothes was the possible acceptance of women's foreign clothes. It relate with much discussion to improve Korean development in those days and substitute foreign clothes for Korean clothes because of institence in those days to improve functional clothes life. 3. An improvement women's Korean clothes generally take aim at women's nipple liberation, substitute vest waist for skirt waist, appear seamless one-piece skirt of shade length, and long dress length of Jacket. 4. Children's clothes give an account of functional and sanitary conditions, handling method, washing method. 5. Clothes materials give account of foreign clothes material, artificial silk, furs, cotton fabrics, and etc. 6. Clothes management give an account of washing, keeping method, washing method of foreign clothes, and keeping of furs. 7. The hair generaly had come short hair into fashion in men's case, while accounts on long hair fashion of foreign nation effect in case of women. 8. Describing on beauty care manage primary beauty care, reform, plastic operation, and shade beauty care. Ideal beauty care deal with natural and dignified buauty care. 9. Accesaries (hat, handbag, handkerchief, gloves) change with fashion of clothes, it rapid more than clothes fashion. 10. On encouragement of abolition of white clothes and putting on dyeing clothes, because of economic defect of white clothes, psychology and beauty consequently, white clothes is on the rise abolition. In national level almost substitute dyeing clothes for control and improvement of people of all social standings consequently, dress and its ornaments conditions in those days analyzed account of Dong-A II Bo accept the foreign clothes that introduced internal country of the whole century, and substitute dyeing for white clothes. Costume condition in those days appear the mixed conditions of Korean clothes and Foreign clothes. In the 1920's is the first consideration dress and its ornaments form of Korean clothes. As later goes on foreign is given much weight in the whole clothes life. Account of foreign clothes managemental ways appear in the 1920's, while those facts prove the point that appeared the account that always dealed with concrete content of foreign fashion in the 1930's.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.153-163
• /
• 1988

This experiment was carried out to obtain the thermophilic fungus producing amylase and to investigate properties of the amylase. The selected strain, L-11 was obtained from soil in the vicinity of a hot spring and identified as Mocor sp.. And then the conditions for enzyme production in wheat bran cultures and properties of the crude enzyme were investigated. Furthermore, the enzyme was purified and the characteristics of purified enzyme were studied. The results obtained were as follows: 1. On the wheat bran medium added 80-100% water, amylase was effectively produced by the selected strain, L-11 for 48 hrs incubation at $50^{\circ}C$. 2. When the crude enzyme solution of the strain L-11 was passed through DEAE-Sephadex A-50 column chromatography, two peaks having amylase activity were obtained, and one peak was that of the main enzyme (enzyme of B peak). 3. The purified enzyme (enzyme of B peak) was recognized as single protein band on polyacrylamide disc gel electrophoresis. 4. In the hydrolysis reaction of soluble starch by the enzyme of main amylase, oligosaccharides produced at early stage were maltose and maltotriose mainly and procedure of the reaction maltose amount of maltose and glucose was increased. 5. The strain L-11 was recognized as a special strain producing ${\alpha}-amylase$ mainly and scarcely glucoamylase. 6. The optimum pH, optimum temperature, pH stability, and temperature stability of ${\alpha}-amylase$ were pH 4.0, $60-65^{\circ}C$, pH 4.0-9.0, and below$70^{\circ}C$.