• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.153-166
• /
• 2004

This paper presents a comparative study of a fully coupled, upwind, compressible Navier-Stokes code with three two-equation models and the Baldwin-Lomax algebraic model in predicting transonic/supersonic flow. The k-$\varepsilon$ turbulence model of Abe performed well in predicting the pressure distributions and the velocity profiles near the flow separation over the axisymmetric bump, even though there were some discrepancies with the experimental data in the shear-stress distributions. Additionally, it is noted that this model has y$\^$*/ in damping functions instead of y$\^$＋/. The turbulence model of Abe and Wilcox showed better agreements in skin friction coefficient distribution with the experimental data than the other models did for a supersonic compression ramp problem. Wilcox's model seems to be more reliable than the other models in terms of numerical stability. The two-equation models revealed that the redevelopment of the boundary layer was somewhat slow downstream of the reattachment portion.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1139-1144
• /
• 1990

In this paper, we consider linear periodic discrete-time control systems under periodic compensation. Such a closed-loop system generally represents a periodic time-varying system. We examine the problem of finding a compensator such that the closed-loop system is realized as LTI model (if possible) with the closed-loop stability being satisfied. We present a necessary and sufficient condition for solving such problem and also give the characterization of realizable LTI models.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.134-140
• /
• 1999

A three-dimensional CSCM upwind flux difference splitting Navier-stokes code with two-equation turbulence models was developed to predict the transonic flows in centrifugal compressor diffuser. The k-$\epsilon$ model of Abe et al. performed well in predicting the pressure distribution in the shock wave/turbulent boundary-layer interaction. Three turbulence models predicted the similar distribution of static pressure through the diffuser and showed a good agreement with the experimental results. The secondary flows in the corner were predicted well by these turbulence models. The pressure increase before the throat of the diffuser vane is important for the overall pressure recovery. As the mass flow rate increased the blockage decreased at the throat. The pressure coefficient distribution through the diffuser depended on the throat blockage not on the rotational speed of the impeller.

• Molecules and Cells
• /
• v.37 no.6
• /
• pp.435-440
• /
• 2014

Hemodynamic shear stress, the frictional force acting on vascular endothelial cells, is crucial for endothelial homeostasis under normal physiological conditions. When discussing blood flow effects on various forms of endothelial (dys)function, one considers two flow patterns: steady laminar flow and disturbed flow because endothelial cells respond differently to these flow types both in vivo and in vitro. Laminar flow which exerts steady laminar shear stress is atheroprotective while disturbed flow creates an atheroprone environment. Emerging evidence has provided new insights into the cellular mechanisms of flowdependent regulation of vascular function that leads to cardiovascular events such as atherosclerosis, atherothrombosis, and myocardial infarction. In order to study effects of shear stress and different types of flow, various models have been used. In this review, we will summarize our current views on how disturbed flow-mediated signaling pathways are involved in the development of atherosclerosis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.143-153
• /
• 2015

This paper presents the results of an experimental study on the motion of an FPSO (Floating production storage and off-loading) and the characteristics of the mooring systejavascript:confirm_mark('abe', '1');m according to the turret position. Model tests of a turret-moored FPSO were carried out in the Ocean Engineering basin of KRISO. The FPSO was moored using an internal turret and catenary mooring. The models (1/60 scale) that were prepared included the FPSO, turret, and mooring lines. The experiments were conducted in irregular waves and combined environments, with waves, currents, and winds. A time-domain simulation was performed using OrcaFlex. The motion response and mooring line tension from the present calculations were compared with the results of experiments, and the agreement was fairly good. In addition, the results showed that the weathervaning stability was improved when the position of the turret was moved in the bow direction.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.1
• /
• pp.15-26
• /
• 2016

Based on a survey done recently in Japan, 30 percent of the serious accidents occurred in oral implant surgery were concerned with the mandibular canal and 3/4 of them were related to drilling. One of the reasons lies in the lack of the education system. To overcome this problem, a new educational system focusing on drilling the mandibular trabecular bone has been developed mainly for dental college students in the form of an oral implant surgery training simulator that enables student to sense the reaction force during drilling. On the other hand, the conventional system uses polymeric model. Based on these systems, two approaches were proposed; the evaluation by experienced clinicians using the simulator, and experimental works on the polymeric model. Focusing on the combination of the drilling force sensed and drilling speed obtained through both approaches, the results were compared. It was found that the polymeric models were much softer especially near the mandibular canal. In addition, the study gave us an insight of the understanding in bone quality through tactile sensation of the drilling force and speed. Furthermore, the clinicians positively reviewed the simulator as a valid tool.

• Archives of Plastic Surgery
• /
• v.45 no.1
• /
• pp.51-57
• /
• 2018

Background The free anterolateral thigh (ALT) flap has been widely used for various kinds of reconstructions. However, delayed healing at the donor site occasionally occurs due to wound dehiscence or the partial loss of grafted skin at the donor site. The aim of the present study was to identify reliable predictive factors for delayed healing at the donor site after the harvest of a free ALT flap. Methods This study included 52 patients who underwent reconstructive procedures using free ALT flaps. The delayed healing group included patients with wounds at the donor site that had not healed over 3 weeks after surgery, and the normal healing group included patients who showed wound healing within 3 weeks after surgery. Multivariate logistic regression models were created to identify the risk factors for delayed healing at the ALT flap donor site. Results Among the 52 patients, 24 (46.2%) showed delayed healing at the donor site, and 6 patients required additional operative treatment. A high preoperative body mass index (BMI), smoking, and skin grafting were found to be significantly associated with delayed healing at the ALT donor site. Of the 37 patients who underwent skin grafting, 23 (62%) experienced delayed healing at the donor site. Conclusions A high preoperative BMI, smoking, and skin grafting were risk factors for delayed healing at the free ALT donor site. Skin grafting at the ALT donor site should be avoided in patients with a high BMI or a habit of smoking.

• Nutrition Research and Practice
• /
• v.10 no.3
• /
• pp.359-363
• /
• 2016

BACKGROUND/OBJECTIVES: This study aimed to examine the association of Japanese schoolchildren's involvement in at-home meal preparation with food intake and cooking skill. SUBJECTS/METHODS: We included 1,207 fifth-grade children aged 10-11 years and one parent of each child. A cross-sectional survey was used to collect data on involvement in at-home meal preparation. Correspondence analysis was used to classify involvement in at-home meal preparation into three groups: food-related activities (cooking only or with other activities such as shopping, table-setting, clean up, and dishwashing), non-food-related activities (table-setting and/or clean up), and no (helping) activities. Food intake was assessed using a food frequency questionnaire. Logistic regression models were used to examine involvement in at-home meal preparation associations. RESULTS: The sample consisted of 1,207 fifth-grade children. Vegetable intake was lower in the no (helping) activities group than the food-related activities group (95% CI; boys: 1.2, 5.1, girls: 2.0, 8.9). Fewer children in the non-food-related activities group reported they were able to make a portion of their meals compared with the food-related activities group (95% CI; boys: 1.6, 3.5; girls: 1.5, 3.2). CONCLUSIONS: Children in the food-related activities group showed more favorable food intake and cooking skills than children in the no (helping) activities or non-food-related activities group.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1625-1628
• /
• 2003

Recently the VR technique has evolved into a mixed reality (MR) technique, in which a user can observe a real world in front of him/her as well as virtual objects displayed. This has been realized by the employment of a see-through type HMD (S-HMD). We have been developing a mixed reality space employing the MR technique. The objective of our study is to realize a virtual human that acts as a man-machine interface in the real space. It is important in the study to create a virtual human acting naturally in front of a user. In order to give natural motions to the virtual human, we employ a developed motion capture technique. We have already created various 3-D human motion models by the motion capture technique. In this paper, we present a technique for creating a virtual human using a human model provided by a computer graphics software, 3D Studio Max(C). The main difficulty of this issue is that 3D Studio Max(C) claims 28 feature points for describing a human motion, but the used motion capture system assumes less number of feature points. Therefore a technique is proposed in the paper for producing motion data of 28 feature points from the motion data of less number of feature points or from incomplete motion data. Performance of the proposed technique was examined by observing visually the demonstration of some motions of a created virtual human and overall natural motions were realized.