• Journal of the Korean GEO-environmental Society
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2007

Engineering behaviour of uplift-resisting ground anchors constructed in weathered rocks has been investigated by carrying out a series of full scale pull-out tests. The anchor was to resist uplift forces (buoyancy) associated with high groundwater table acting on the basement of a rail way station. The study has included the ultimate pull-out capacity of the anchors and shear stress transfer mechanism at the anchor-ground interface. The pull-out tests were conducted by changing bonded lengths of the anchor (2~7 m) and diameter of drilled borehole (108~165 mm) to investigate their effects on the behaviour of the anchor. The measured results showed that the ultimate capacity of the anchors was increased with an increase in the bonded length, diameter of drilled borehole as expected. The ultimate capacity of the anchors deduced from the pull-out tests ranged from 392 to 1,569 kN, depending on the above-mentioned factors. This corresponds to the interface shear strength of about 227~505 kPa. Interface shear stresses deduced from the pull-out test showed that the larger the pull-out force, the larger the mobilisation of the interface shear strength. The failure mode of the anchors heavily depended on the bonded lengths of the anchors. When the bonded length was short (2~3 m), a cone-type failure was observed, whereas when the bonded length increased (5~7 m), failure developed at the grout-ground interface.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.2
• /
• pp.272-278
• /
• 2015

The aim of this study is to find out the behavior and acoustic backscattering of the large jellyfish Nemopliema nomurai using hydroacoustics in situ. N. nomurai was distributed at depths ranging from 10~15 m during the day. Regarding the behavior of N. nomurai, there was no significant change in depth, and 3D tortuosity was not high. The vertical direction was ${\pm}10^{\circ}$ from the horizontal, and moving speed was $0.9{\sim}1.5\;m\;s^{-1}$. With regard to hydro-acoustical characteristics, the mean TS of N. nomurai ranged from -69.6~-56.0 dB at 38 kHz and -69.4~-54.5 dB at 120 kHz. TS variation (Max TS-Min TS) at 38 and 120 kHz was 0~10.2 dB and 0.2~16.0 dB, respectively. Mean TS and TS variation (Max TS-Min TS) of N. nomurai were higher at 120 kHz than at 38 kHz. The results showed that the use of hydroacoustics was effective in estimating the distribution depth, behavior, and acoustic characteristics of the target.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.168-168
• /
• 2008

Dimension of a transistor has rapidly shrunk to increase the speed of device and to reduce the power consumption. However, it is accompanied with several problems like direct tunneling through the gate dioxide layer and low conductivity characteristic of poly-Si gate in nano-region. To cover these faults, study of new materials is urgently needed. Recently, high dielectric materials like $Al_2O_3$, $ZrO_2$, and $HfO_2$ are being studied for equivalent oxide thickness (EOT). However, poly-Si gate is not compatible with high-k materials for gate-insulator. Poly Si gate with high-k material has some problems such as gate depletion and dopant penetration problems. Therefore, new gate structure or materials that are compatible with high-k materials are also needed. TiN for metal/high-k gate stack is conductive enough to allow a good electrical connection and compatible with high-k materials. According to this trend, the study on dry etching of TiN for metal/high-k gate stack is needed. In this study, the investigations of the TiN etching characteristics were carried out using the inductively coupled $BCl_3$-based plasma system and adding $Cl_2$ gas. Dry etching of the TiN was studied by varying the etching parameters including $BCl_3$/Ar gas mixing ratio, RF power, DC-bias voltage to substrate, and $Cl_2$ gas addition. The plasmas were characterized by optical emission spectroscopy analysis. Scanning electron microscopy was used to investigate the etching profile.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.464-470
• /
• 2016

The objective of this study was to investigate the accuracy of imputation from low density (LDC) to moderate density SNP chips (MDC) in a Thai Holstein-Other multibreed dairy cattle population. Dairy cattle with complete pedigree information (n = 1,244) from 145 dairy farms were genotyped with GeneSeek GGP20K (n = 570), GGP26K (n = 540) and GGP80K (n = 134) chips. After checking for single nucleotide polymorphism (SNP) quality, 17,779 SNP markers in common between the GGP20K, GGP26K, and GGP80K were used to represent MDC. Animals were divided into two groups, a reference group (n = 912) and a test group (n = 332). The SNP markers chosen for the test group were those located in positions corresponding to GeneSeek GGP9K (n = 7,652). The LDC to MDC genotype imputation was carried out using three different software packages, namely Beagle 3.3 (population-based algorithm), FImpute 2.2 (combined family- and population-based algorithms) and Findhap 4 (combined family- and population-based algorithms). Imputation accuracies within and across chromosomes were calculated as ratios of correctly imputed SNP markers to overall imputed SNP markers. Imputation accuracy for the three software packages ranged from 76.79% to 93.94%. FImpute had higher imputation accuracy (93.94%) than Findhap (84.64%) and Beagle (76.79%). Imputation accuracies were similar and consistent across chromosomes for FImpute, but not for Findhap and Beagle. Most chromosomes that showed either high (73%) or low (80%) imputation accuracies were the same chromosomes that had above and below average linkage disequilibrium (LD; defined here as the correlation between pairs of adjacent SNP within chromosomes less than or equal to 1 Mb apart). Results indicated that FImpute was more suitable than Findhap and Beagle for genotype imputation in this Thai multibreed population. Perhaps additional increments in imputation accuracy could be achieved by increasing the completeness of pedigree information.

• Clinical and Experimental Pediatrics
• /
• v.55 no.5
• /
• pp.171-176
• /
• 2012

Purpose: The aim of this study was to investigate the natural history of epilepsy and response to anti-epileptic drug treatment in patients with Angelman syndrome (AS) in Korea. Methods: We retrospectively reviewed the clinical records of 14 patients diagnosed with epilepsy out of a total of 17 patients with a genetic diagnosis of AS. These patients were seen at the Department of Pediatric Neurology at Severance Children's Hospital from March 2005 to March 2011. Results: Fourteen (9 males and 5 females) subjects (82.3%) were diagnosed with epilepsy in AS. The most common seizure types were generalized tonic-clonic (n=9, 27%) and myoclonic (n=9, 27%), followed by atonic (n=8, 24%), atypical absence (n=4, 12%) and complex partial seizure (n=3, 9%). The most commonly prescribed antiepileptic drug (AED) was valproic acid (VPA, n=12, 86%), followed by lamotrigine (LTG, n=9, 64%), and topiramate (n=8, 57%). According to questionnaires that determined whether each AED was efficacious or not, VPA had the highest response rate and LTG was associated with the highest rate of seizure exacerbation. Complete control of seizures was achieved in 6 patients. Partial control was achieved in 7 patients, while one patient was not controlled. Conclusion: Epilepsy is observed in the great majority of AS patients. It may have early onset and is often refractory to treatment. There are few reports about epilepsy in AS in Korea. This study will be helpful in understanding epilepsy in AS in Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.253-265
• /
• 2011

When restoring endodontically treated teeth is the mismatch between fiber post size and post space diameter, the resin cement layer is excessively thick in post space and voids are likely to form in it, thus predisposing to de-bonding. The method to overcome this problem is to reline the fiber post with composite resin. This individual anatomic post improves the adaptation of post to root walls and decreases the resin cement thickness. The purpose of this in vivo study was to evaluate the push-out bond strength of fiber post according to relining procedure and luting agents type used for simplicity of clinical procedure. Forty-two extracted teeth were divides into six groups.(n=7) A1: relined fiber post cemented with Luxacore/all-bons 2, A2: non-relined fiber post cemented with Luxacore/all-bond2, B1: relinind fiber post cemented with Calibra/XP-bond, B2: non-relined fiber post cemented with Calibra/XP-bond, C1: relined fiber post cemented with RelyX Unicem, C2: non-relined fiber post cemented with RelyX Unicem Push-out bond strength was affected by interaction between relining procedure and luting agent type. Relined fiber post presented higher push-out bond strength value than non-relined fiber post and statically significant differences(p<0.05) Cementation with RelyX Unicem showed significantly higher bond strength than other luting agents(p<0.05).

• Journal of Environmental Impact Assessment
• /
• v.23 no.2
• /
• pp.101-111
• /
• 2014

The research was carried out in order to find climate factors which determine the distribution of Neolitsea sericea, and the potential habitats (PHs) under the current climate and three climate change scenario by using species distribution models (SDMs). Four climate factors; the minimum temperature of the coldest month (TMC), the warmth index (WI), summer precipitation (PRS), and winter precipition (PRW) : were used as independent variables for the model. Three general circulation models under A1B emission scenarios were used as future climate scenarios for the 2050s (2040~2069) and 2080s (2070~2099). Highly accurate SDMs were obtained for N. sericea. The model of distribution for N. sericea constructed by SDMs showed that minimum temperature of the coldest month (TMC) is a major climate factor in determining the distribution of N. sericea. The area above the $-4.4^{\circ}C$ of TMC revealed high occurrence probability of the N. sericea. Future PHs for N. sericea were projected to increase respectively by 4 times, 6.4 times of current PHs under 2050s and 2080s. It is expected that the potential of N. sericea habitats is expanded gradually. N. sericea is applicable as indicator species for monitoring in the Korean Peninsula. N. sericea is necessary to be monitored of potential habitats.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.4
• /
• pp.357-366
• /
• 2010

The purpose of this study is to evaluate a method for the measurement of N,N-Dimethylformamide (DMF) and to apply the method to the ambient air samples. For the determination of DMF together with other general VOCs (e.g., benzene, toluene, and xylenes), adsorption sampling and thermal desorption with GC/MS was used in this study. The sampling and analytical approaches tested in this study showed a good repeatability and linearity with lower detection limits of less than 0.35 ppb. Field measurements were carried out at three industrial sites (Daegu-Seongseo, Siwha and Banwall industrial complexes) and one residential site in Daegu city during a period from October 2006 to November 2008. DMF was detected in 71.8% of the total samples from the Seongseo industrial complex, well known for textile industry. In contrast, DMF was detected in only 20.4% and 12.9% of all the samples from the other two sites in Banwall and Siwha industrial complexes, respectively. This implies that sources of DMF should be strongly associated with textile industry. The mean concentration of DMF also appeared to be the highest in Seongseo site (5.95 ppb), followed by a residential site in Daegu (3.28 ppb), Banwall (0.88 ppb) and Siwha (0.55 ppb). In this study, we demonstrated the environmental significance of DMF in urban ambient air. To our knowledge, the DMF measurement introduced in this paper is the first case of an official report in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.11-19
• /
• 1999

This experiment was conducted with nine wheat geno-types to choose the wheat which has excellent early vigour. 'Vigour 18' and 'ZL 59A' are excellent in the long coleoptile genotype, while 'Amery' and 'Janz' are excellent in the short coleoptile genotype. Responding to the growth stage and nitrogen level, Vigour 18 is predominant in the long coleoptile genogype, while Janz in the short coleoptile genotype. Responding to sowing density and nitrogen level, the higher the sowing density was, the shorter the leaf area of Vigour 18 and Janz. Also the leaf area turned out to larger in the plot fertilized with high nitrogen than in the plot fertilized with low nitrogen. This is true of leaf weight and root weight. Concerning specific leaf area (SLA) and leaf area ratio (LAR), the higher the sowing density was, the SLA tended to grow larger, while the SLA grew larger in the plot fertilized with low nitrogen, as were found in Vigour 18 and Janz. The roots of long coleoptile genotype, Vigour 18, turned out to grow longest on the plot sown with 3 seeds. While the roots of short coleoptile genotype, Janz, grew longest on the plot sown with 2 seeds. The relative growth rate (RGR) was the same at low N rates and high N rates. The RGR was 0.071 and 0.072 g $g^{-1}d^{-1}$ at low N rates and high N rates. The partitioning of RGR into net assimilation rate (NAR) and LAR showed that the average LAR at low N rates was similar to the LAR at high N rates. Variation within each cultivar in the LAR and NAR was small relative to the difference between them at low N rates and high N rates. Above ground mass was 8.2 mg greater at high N rates than low N rates, whereas leaf area was 0.05 $\textrm{m}^2$$kg^{-l}$ greater at high N rates than low N rates. The NAR was similar at low N rates and high N rates, whereas LAR was greater at high N rates (0.05 $\textrm{m}^2$$kg^{-l}$); variation in SLA was responsible for the variation in NAR and LAR both at low N rates and high N rates. NAR was more closely associated with the reciprocal of SLA.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.683-692
• /
• 2011

In piloti-type low-rise RC residential buildings, severe damages have been usually concentrated at piloti stories under the earthquake. In this study, a piloti story was retrofitted by installation of buckling-restrained braces (BRB's) to increase strength and stiffness of piloti story and by application of fiber reinforced polymer (FRP) sheet on columns to avoid the brittle shear and axial failure of columns. To verify this retrofit performance, reversed cyclic lateral load tests were performed on 1:5 scale bare and retrofitted frames. The test results showed that yield strength (43.2 kN) appeared to be significantly larger than design value (30 kN) due to the increase of strength in the compression side, but the stiffness value (11.6 kN/mm) turned out to be approximately one-half of the design value (24.2 kN/mm). The reasons for this difference in stiffness were due to slippage at joint between the frame and the BRB's, displacement and rotation at footing. The energy absorption capacity of the retrofitted frame was 7.5 times larger than that of the bare frame. The change of the number of load cells under the footing from 2 to 1 reduced lateral stiffness from 11.6 kN/mm to 6 kN/mm, which was only three times larger than that of the bare frame (2.1 kN/mm).